Auto Body Technician jobs in Corning

Plant Technician

Plant Technician The Plant Technician is responsible for the operation of all plant processing equipment and performing routine basic maintenance in a highly automated chemical facility. In the area of maintenance, Plant Technicians are responsible for the safe and efficient maintenance, basic repair, and cleaning of all equipment associated with bioprocessing processes. At times, Plant Technicians may be asked to assist Maintenance Technicians in more technical and complex maintenance procedures. Team members in this position are required to maintain knowledge of the process flow, computerized equipment, and be aware of hazards associated with the process as well as understand and execute standard operating procedures (SOPs). Continuous plant operation requires 12-hour shift work. Plant Technicians must be able to adapt to 12-hour workdays and be able to meet call-in requirements as needed. Use your knowledge to maintain and operate all processes associated with the plant where required. Perform maintenance and basic repairs of plant equipment and document these activities. Operate the DCS (Distributed Control System) for the plant. Safely perform basic electrical troubleshooting. Follow procedures for plant start-up, shut-down, cleaning, and batching. Maintain accurate and timely logs. Collect and test quality control samples, interpret QA/QC results and make adjustments to optimize plant operations, timely and accurately document results and enter results into our data collection system, PI. Assist in removal, installation, rebuild, and performance of preventive and predictive maintenance on all equipment associated with plant processes. Help keep your plant clean by following the sanitation schedule and completing all tasks as assigned. Notify the management team of safety, environmental, quality, and production concerns, problems, and opportunities. Keep your plant safe by fostering a culture of safe behavior and environmental compliance. Maintain a team environment at all times and champion POET in the community. Since we're all about teamwork and getting the job done, your skill may be put to a lot of other uses! High school diploma or equivalent required. Experience requirements: Plant Technician I: experience in a production environment preferred. Plant Technician II: Documented successful performance as a Plant Technician I or equivalent work experience required. Plant Technician III: Documented proficiency in the skills listed in the Plant Technician III Skills Checklist. Working knowledge in math, reading comprehension, and mechanical reasoning is required. Strong troubleshooting and problem-solving skills are required. Experience with software systems, such as Maximo, preferred. Excellent organizational, time management, and communication skills as well as the ability to embrace change. You have the ability to understand the technical and day-to-day operation of a bioprocessing facility. You know the basics of Microsoft Office Suite. You're capable of learning new programs. Team members will be required to adhere to all safety requirements at all times and in all work environments. This position is exposed to work in multiple environments, including plant, laboratory, and office environments. You may be exposed to high noise levels, moving mechanical parts, dusty conditions, internal and external temperature/weather conditions, and chemicals. Due to the physical and safety-sensitive nature of this job, you will be subject to a physical and expected to pass a drug screen during the pre-screen process. During employment, you'll be subject to random drug and alcohol testing. This role has some physical requirements that our team members will need to be able to perform, such as: Wearing Personal Protective Equipment (PPE) such as hard hats, gloves, safety glasses, steel-toed boots, hazardous material suits, hearing protection, and harness. Working at extreme heights (approximately 150 ft), in confined spaces, and in extreme temperatures from -20 to +100 degrees Fahrenheit, both indoors and outdoors. Due to the nature of the work, the areas can be dusty at times. Must be able to use the following equipment/tools, with training provided (not all-encompassing): forklift, power washer, pallet jack, hoist systems, scissor lifts, JLG lifts, telehandlers, Front-End Loaders, various hand tools, and computers. Frequently: Sitting in a chair in the Control Room while operating the plant Walk indoors and outdoors, sometimes over rough, uneven, or wet/slick surfaces Carry to up to 15lbs Climb stairs and/or ladders Stand indoors to clean and maintain areas Reach at arm's length to gather samples Be in awkward back, shoulder, wrists, and hand positions Use coordination and grip, with a force of up to 50lbs Bend while standing Use repetitive arm motions to wipe down and maintain the work area Climb in and out of Powered Industrial Vehicles Occasionally: Lift up to 50lbs, with or without assistance Carry up to 40 lbs, with or without assistance Push with a force of 10lbs, with or without assistance Pull with a force of up to 85lbs, with or without assistance Bend, twist, turn, kneel, and crouch while holding light and medium-weighted objects Since we are all about team work, you may be asked to help other roles that have their own unique set of physical requirements. We're all on the same team. We always communicate. And we park our egos at the door. These aren't just slogans on our walls. It's the way we do things at POET. We provide an environment for team members to maintain a healthy work-life balance. It's the best way to optimize health, wellness, and productivity in a sustainable way. We work hard. We play hard. We have frequent team events, volunteer efforts, and we know how to celebrate wins! At POET we encourage internal development and growth by allowing team members to carve their own path to success. Leaders support team members with the necessary resources to develop their skills, achieve goals, and create the most value. We believe in developing our team members to their highest potential and recognizing contributions that add value to the organization. Each new team member's position and compensation are carefully determined by considering their unique qualifications and skillset. POET is an Equal Opportunity Employer committed to maintaining a workplace free from discrimination and harassment. Employment decisions are based on qualifications, abilities, merit, and other legitimate business factors, without regard to any legally protected characteristic. This policy applies to all aspects of employment, including recruitment, hiring, compensation, benefits, working conditions, promotion, and termination.

Posted 23 hours ago

Work Life Balance

certified pharmacy technician

Hy-Vee Corning, IA

Pharmacy Technician - Certified At Hy-Vee our people are our strength. We promise "a helpful smile in every aisle" and those smiles can only come from a workforce that is fully engaged and committed to supporting our customers and each other. Job Description Provides prompt, efficient and friendly customer service. Assist pharmacists in the preparation and distribution of prescription medications. Licensed, through a national certification program, as a pharmacy technician. Core Competencies Partnerships Growth mindset Results oriented Customer focused Professionalism Reporting Relations Accountable and reports to: District Store Director, Store Manager, Assistant Managers of Health Wellness Home, Store Operations and Perishables; Pharmacy Department Manager, Staff Pharmacists Primary Duties and Responsibilities Provides prompt, efficient and friendly customer service by exhibiting caring, concern and patience in all customer interactions and treating customers as the most important people in the store. Smiles and greets customers in a friendly manner, whether the encounter takes place in the employee's designated department or elsewhere in the store. Makes an effort to learn customers' names and to address them by name whenever possible. Assists customers by: (examples include) escorting them to the products they're looking for securing products that are out of reach loading or unloading heavy items making note of and passing along customer suggestions or requests performing other tasks in every way possible to enhance the shopping experience. Answers the telephone promptly and provides friendly, helpful service to customers who call. Works with co-workers as a team to ensure customer satisfaction and a pleasant work environment. Handles inquiries that do not require a pharmacist's expertise and judgment. Accepts new written prescription orders and telephoned refill requests at the discretion of the supervising pharmacist. Takes orders from or calls doctor's offices for refill prescriptions. Gathers patient information required to prepare prescriptions. Assists in maintaining correct patient information. Assists pharmacists in preparing prescription drug products for dispensing. Prepares and affixes labels to prescription containers. Prepares prescriptions to be mailed. Prepares and submits insurance claims. Files prescriptions after they have been dispensed. Reports any medication errors to appropriate personnel. Orders, checks-in, and stocks pharmacy supplies. Logs invoices as necessary. Performs cash transactions. Maintains cleanliness of pharmacy and dispensing area. Assists with third party insurance billing and trouble shooting. Maintains strict adherence to department and company guidelines related to personal hygiene and dress. Adheres to all statutes and regulations pertaining to a pharmacy technician. Adheres to company policies and individual store guidelines. Reports to work when scheduled and on time. Administer Vaccines as allowed by law Secondary Duties and Responsibilities Assists in other areas of the store as needed. Performs other job related duties and special projects as required. Knowledge, Skills, Abilities and Worker Characteristics Must have the ability to do logical or scientific thinking to solve problems; several abstract and concrete variables. Have the ability to do arithmetic calculations involving arithmetic, algebraic and geometric calculations. Must be able to compose original correspondence; follow technical manuals; have increased contact with people; interview counsel or advise people; evaluate technical data Education and Experience High school diploma or equivalent. Certified as a licensed technician through a certified national program and maintains continuing education requirements to keep license active. Previous experience as a pharmacy technician or pharmacy clerk is preferred. If applicable, vaccination certification as required by law. Physical Requirements Must be able to physically exert up to 50 pounds of force occasionally, 10 pounds of force frequently, and a negligible amount of force constantly to move objects. Visual requirements include vision from less than 20 inches to more than 20 feet with or without correction, depth perception, color vision (ability to identify and distinguish colors), and field of vision. Must be able to perform the following physical activities: Climbing, balancing, stooping, kneeling, reaching, standing, walking, pushing, pulling, lifting, grasping, feeling, talking, hearing, and repetitive motions. Working Conditions This position frequently involves a fast work pace in a retail store setting. Must be able to handle multiple tasks (filling scripts, answering telephone, waiting on customers, etc.) every day. There is an occasional exposure to dangerous chemicals/solvents while compounding products and chemotherapy drugs. Equipment Used to Perform Job PC with pharmacy software and printer, cash register, C.A.R.S. ordering system, pharmacy balance, scanner, calculator, telephone, fax, and copier. Confidentiality Maintains the confidentiality of the customer's private medical information according to the HIPPA act. Contacts Has daily contact with customers, general public, and suppliers/vendors. Has occasional contact with community or trade/professional organizations and federal/state governmental or regulatory agencies. I understand that this pharmacy handles and prepares hazardous drugs. The USP 800 is intended to ensure that personnel of reproductive capability understand the risks of handling hazardous drugs. Accordingly, I acknowledge that exposure to hazardous drugs may cause acute and chronic effects. Failure to follow pharmacy policies and procedures may put me at greater risk of exposure to hazardous drugs. Are you ready to smile, apply today. Employment is contingent upon the successful completion of a pre employment drug screen.

Quick Apply

Refrigeration Technician

Cargill Corning, MO

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Nebraska City, NE Job Type: Full Time Shift(s) Available: 2nd Compensation: $28.40 - $29.40 /hr Benefits Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill Matching Contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Using hand tools to perform maintenance on refrigeration/utility machinery Ensuring food safety and quality Cleanliness and housekeeping Responding to radio calls from other departments (production, food safety, safety, etc.) for maintenance related actions Communicating with other departments and other department shifts to ensure proper pass down of maintenance related issues to the next shift Documenting daily work assigned on paper and also in the maintenance management system (SAP) Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Ability to work alone without supervision. Understand and follow job plans Perform preventative maintenance (PM’s) and troubleshooting of equipment related to the refrigeration/utility department Able to do basic math calculations, example: addition, subtraction, multiplication and division. Have basic computer skills and ability to read/write/speak English Ability to pass physical examination in order to don and doff SCBA Ability to learn and use SAP to document work hours and search for parts Able to work in cold environment 40 degrees or less for up to twelve (12) hours per day and able to work standing for up to twelve (12) hours per day Use measuring devices to accurately measure different areas of equipment using the metric or standard system. Use multimeters, megohmmeters, and any other test equipment needed to aid in the troubleshooting and repair or equipment Basic knowledge of hand-tools and mechanical aptitude Basic ability to perform tasks related to the upkeep of building and grounds Able to use a powered industrial truck (PIT) or eligible to acquire license and maintain the license Ability to learn RETA certification information and pass Ammonia Operator classes Preferred Qualifications 2 year degree in refrigeration related field Previous production or maintenance experience Meat processing experience Food handling experience Certification or refrigeration experience Power equipment experience Please note that this position does not include relocation reimbursement Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Best Match

HVAC Technician

Cargill Corning, MO

Application Technician

Integrated Resources Inc. Corning, NY

Integrated Resources, Inc., is led by a seasoned team with combined decades in the industry. We deliver strategic workforce solutions that help you manage your talent and business more efficiently and effectively. Since launching in 1996, IRI has attracted, assembled and retained key employees who are experts in their fields. This has helped us expand into new sectors and steadily grow.Job Description Duration-4 monthsDescriptionDeveloping new applications for Gorilla Glass requires extensive characterization of the mechanical, chemical, optical and environmental performance of the base Gorilla Glass, as well as the glass in its final product configuration.In the auto glazing application, this can include regulatory (safety) testing, mechanical testing, thermal effect testing, lamination and decoration on glass testing and optical testing.These tests must be performed in a manner which is consistent with industry standards and customer expectations.Auto Interior applications have similar needs.The test technician will be responsible for conducting various mechanical, chemical, optical, and acoustic tests to ensure adherence to customer requirements, enable certification per industry standards and generating product performance results in the accelerated timeline needed for new product launches.Day to Day Responsibilities:Hand operation of mechanical test equipment, chemical, optical measurements systems, and acoustic test benchesManual or electronic data collection and compilation for analysisWritten and verbal communication of test resultsElectronic sample ordering, sample inventory management, and manual preparation of samples to be testedMaintenance and assessments of test equipment, tools, and procedures for safe and proper operationCreate or modify documentation of test procedures for test rigor and continuous improvementTravel Requirements (please note if international):Travel is expected to be ≤ 20%. This would be a combination of domestic and international travel. International travel would include most commonly East Asia and Europe.Hours of work/work schedule/flex-time:40 hours per week. Flex-time is acceptable with core working hours from 9 AM to 4 PM.Required Skills (These are skills that candidates MUST possess)1. Hands on ability to work with mechanical, chemical, optical measurements, and acoustic test bench equipment2. Computer and data analysis skills with experience in Microsoft Excel and Minitab desired3. Possess strong work ethic and attention to detail4. Interpersonal and communication skills – collaborates with others in team based environmentDesired Skills (These are skills that would be nice for candidates to possess)1. Previous testing and professional experience2. Proficiency in advanced data analysis tools such Minitab and/or Excel3. Experience or familiarity with glass processing and automotive applications and requirementsEducation and Experience (minimum required for consideration)Bachelors of Science in Engineering, Chemistry, Materials Science or Physics desired.Minimum of Associates degree in a technical discipline (preferred mechanical, chemistry) with 0 to 2 years’ experienceDesired: Previous experience in a test technician role or laboratory environmentSoft Skills (Communication/Team/Leadership)1. Ability to handle time critical tasks and requests2. Prioritization and Multi-tasking3. Work effectively in a dynamic environment where tasks and priorities can change frequently4. DependableAdditional Information All your information will be kept confidential according to EEO guidelines.#J-18808-Ljbffr

Mechanical Technician II

Corning Incorporated Corning, NY

Corning is one of the world’s leading innovators in glass, ceramic, and materials science. From the depths of the ocean to the farthest reaches of space, our technologies push the boundaries of what’s possible.How do we do this? With our people. They break through limitations and expectations – not once in a career, but every day. They help move our company, and the world, forward.At Corning, there are endless possibilities for making an impact. You can help connect the unconnected, drive the future of automobiles, transform at-home entertainment, and ensure the delivery of lifesaving medicines. And so much more.Come break through with us.Corning’s Display Technologies segment manufactures glass substrates for active matrix liquid crystal displays (“LCDs”) that are used primarily in LCD televisions, notebook computers and flat panel desktop monitors.Job SummaryAs a Mechanical Technician, you provide technical support for the design, development, and testing of industrial machinery and components. You apply principles of mechanics, hydraulics, thermodynamics, metallurgy, and machine design, and use computer-aided design (CAD) systems to prepare and revise drawings, schematics, and specifications. Responsibilities include making engineering computations and supporting moderately complex projects with judgment and routine recommendations.Roles and ResponsibilitiesWork will include project and design activities including 3D CAD modeling, running design calculations and generating detailed drawings.We are looking for those with a strong level of technical curiosity and who can deliver creative solutions to technical challenges.Applicants should have the ability to work in a team-based environment, collaborating with engineers, designers and other peers.Good analytical skills, capable of diving into details to uncover insights and deliver impactful solution as an individual contributor.Required Skills and QualificationsAS Degree in CAD or EquivalentAdvanced SolidWorks / EPDM userAdvanced AutoCAD or AutoCAD LTAbility to read and interoperate models and drawings.General understanding of mechanical design principalsIntroductory understanding of drafting and design standards for the groupPreferred QualificationsWelding and fabrication experience is a plus.Demonstrated ability to generate new ideas and concepts for problem solving during the design phase is strongly preferred.This position does not support immigration sponsorship.The range for this position is $59,248.00 - $81,466.00 assuming full time status. Starting pay for the successful applicant is dependent on a variety of job-related factors, including but not limited to geographic location, market demands, experience, training, and education. The benefits available for this position are dependent on hours worked and may include medical, dental, vision, 401(k) plan, pension plan, life insurance coverage, disability benefits, and PTO.A job that shapes a life.Corning offers you the total package.Your well-being is our priority. Our compensation and benefits package supports your health and wellness, financial, and career from day one.As part of our commitment to your financial well‑being, we provide a 100% company‑paid pension benefit that grows throughout your career. We also offer a 401(k) savings plan with company matching contributions.Our health and well‑being benefits include medical, dental, vision, paid parental leave, family building support, fitness, company‑paid life insurance, disability, and disease management programs.Company‑wide bonuses and long‑term incentives, align with key business results and ensure you are rewarded when the company performs well – when Corning wins, we all win.Getting paid for our work is important but feeling appreciated and recognized for those contributions motivates us much more. That’s why Corning offers a peer‑to‑peer recognition program to celebrate success by recognizing colleagues who demonstrate above‑and‑beyond behaviors.We prohibit discrimination on the basis of race, color, gender, age, religion, national origin, sexual orientation, gender identity or expression, disability, veteran status or any other legally protected status.Corning is committed to providing equal employment opportunities and considers requests for reasonable accommodations in accordance with applicable laws. Individuals with disabilities or sincerely held religious beliefs may request reasonable accommodations to participate in the application or interview process, perform essential job functions, or access other benefits and privileges of employment. To submit a request for reasonable accommodation related to disability or religion, please contact us at [email protected].#J-18808-Ljbffr

Immediate Start

Electrical Technician III

Compunnel Inc. Corning, NY

2 days ago Be among the first 25 applicantsGet AI-powered advice on this job and more exclusive features.This range is provided by Compunnel Inc.. Your actual pay will be based on your skills and experience — talk with your recruiter to learn more.Base pay range$30.00/hr - $34.00/hrPerform hands‑on installation support for new or modified production equipment.Provide mechanical discipline support in the construction, installation, debug, troubleshooting and startup of equipment and automated systems including hands on to the point of turnover to operations at both domestic and international manufacturing sites; majority of time be spent on the floor working on equipment.Supervise and provide direction to internal maintenance, and outside contract trades during all aspects of equipment installation and conversion such as demolition, construction, installation, testing, and debug of production equipment.Assist in developing and using project plans and timelines to achieve project goals without sacrificing safety, intellectual property, or quality. Adhere to all corporate, business unit and site guidelines.Safety – Ensure that all the project team has safety training, safety is analyzed in job plans and all safety requirements are met. Identify potential safety issues. Report and investigate all safety incidents.Develop understanding of process and equipment functions in area of responsibility.Assess condition and usability of existing equipment for fit and function with new installation plans.Execute initial equipment set‑up and debug up to the point of turnover to operations.Analyze and correct equipment installation practices to improve efficiencies, specifically directed toward enhancing installation schedules.Create, review, and update installation documentation and drawings as required.Develop and use project plans and timelines to achieve project goals without sacrificing safety, intellectual property, or quality.Re‑design mechanical components to reduce installation cost, solve equipment interferences, and correct inadequate designs.Interface with external system integrators and machine builders to successfully deliver fully integrated process equipment systems to plants on‑time, on‑budget and that satisfy performance measures.Perform hands‑on troubleshooting, replacing or directing trades as necessary to replace defective components and execute changes to solve equipment/process issues.Provide training to internal or contract engineering techs, internal maintenance, and outside contract trades on new equipment installation procedures as required for successful execution of installation activities.Review, “redline”, and modify existing installation checklists, machine part lists, illustrations, machine specs, schedules, and complete drawing packages including follow‑up with drafting services.Create and modify existing documentation to complete drawing packages, installation checklists, machine part lists, illustrations, and machine specs of production equipment.Procure and expedite materials needed to build or install new or modified equipment.Modify software programs used for process equipment control.Understanding use and set‑up of machine controls for system analog and digital I/O requirements, control sequence logic, fail safe states and recovery sequence digital and analog I/O.Aid in developing integrated industrial control systems for new manufacturing equipment and modification of existing equipment.Re‑design electrical components to reduce installation cost, solve equipment interferences, and correct inadequate designs.Required Education / Skills: ElectricalAAS Electrical Engineering Technology, BS Electrical Engineering Technology, BS Electrical Engineering or similar degree. (Equivalent work experience may be considered in rare circumstances.), with minimum 3+ years manufacturing experience working with process and automation equipment.Knowledge of power systems for 480VAC and below.Determines and recommends best solution from a series of alternatives within plant guidelines.Translates engineering solutions to requirements, then further to process and/or equipment designs which deliver required performance criteria as well as interpreting electrical drawings and schematics to aid in troubleshooting.Works well with other disciplines (IT, Mechanical, and Process engineering) to fully understand manufacturing system functionality and design requirements.Ability to work hands‑on with the equipment using typical hand tools, instruments, and measurement/alignment devices.Flexibility with the ability to manage multiple work streams in a team environment adjusting to changing priorities with a strong focus on job site safety and proactive safety approach.Interpretation of drawings and schematics to aid in troubleshooting.Works well in a team environment, is a self‑starter and results oriented & effective in various settings to provide and present necessary information to project, department, and site leaders.Desired Skills: ElectricalEquipment or software experience preferred: * AutoCAD®, AutoCAD Electrical, Windows, MS Office suite including Power Point, Excel, Word. PLC and PC based systems, Beckhoff PLC / Motion Control, B&R PLC Control, A-B PLC / Motion Control, Automated equipment systems experience.Knowledge of regulations applicable to area of expertise and works to ensure compliance (NEC, NFPA70, OSHA, etc.).Experience working on a manufacturing floor or construction environment, with a strong focus on job site safety and proactive safety approach.Displays a bias for action in situations of uncertainty, addresses issues and problems proactively.Effective communication and presentation skills.Knowledge of the Optical Fiber manufacturing process.PLC code development to achieve desired operation/throughput of new and existing production equipment.SCADA/HMI development, PID control theory knowledge, Electro/mechanical technical understanding.Seniority levelMid‑Senior levelEmployment typeContractJob functionEngineering, Manufacturing, and ManagementIndustriesEngineering Services, Robotics Engineering, and ManufacturingReferrals increase your chances of interviewing at Compunnel Inc. by 2xSign in to set job alerts for “Electrical Technician” roles.Wilmington, NC $66,560.00-$70,720.00 1 month ago#J-18808-Ljbffr

Dynamic Environment

Mid Level Automotive Technician - Corning, NY

The Goodyear Tire & Rubber Company Corning, NY

Overview Mid Level Automotive Technician – Corning, NYLocation: Corning, NY 14830Pay up to $20 hourly based on experience. Open walk-in interviews Monday–Friday 10 am to 3 pm.Goodyear. More Driven. Text "Goodyear" to 66866 to connect with a recruiter. Apply today to schedule your on-site interview.Goodyear owns and operates more than 580 tire and auto service centers nationwide. We offer a fun, fast-paced work environment with a comprehensive benefits package and opportunities for training and career advancement.Responsibilities Gain hands-on experience in a Goodyear Auto Service center by diagnosing technical issues and delivering outstanding service using mechanical aptitude.Perform line technician services, routine inspections/maintenance, system diagnostics, brake repairs, fluid exchanges/flushes, preventive maintenance, wheel alignments, and tire installation.Document all work performed on the repair order and report safety issues to management.Promote teamwork to deliver timely, accurate guest care during operating hours.Maintain adherence to company policy on vehicle care and operation; may perform manual tasks for extended periods including lifting and handling tires and wheels.Qualifications Minimum 1 year of automotive experience including brake repairs, fluid flushes, and preventative maintenance.Must have a valid driver's license and be at least 18 years of age.Candidates must be legally authorized to work in the U.S. without company sponsorship now or in the future.Preferred: High School Diploma or GED; ASE Certification; experience diagnosing vehicles and performing road tests; experience with electrical, air conditioning, and fuel systems.What We Look For Commitment to learning new technologies in the rapidly changing automotive industry.Ability to review, analyze, and interpret information, identify problems, and make decisions.Commitment to following safety policies and procedures.Benefits and Perks Medical, prescription, dental, vision, 401(k), life insurance, disability, tuition assistance, PTO/sick and vacation time, and tire discounts.Certification reimbursement and opportunities for fast-track career advancement in technician, sales, and management roles.About the Role: What Skills Will You Learn Perform line technician services, inspections/maintenance, diagnostics, brake repairs, fluid exchanges/flushes, preventive maintenance, alignments, tire installation, and related tasks.Provide excellent guest service with clear communication and feedback; mentor junior technicians.Document work performed and maintain safety standards.Support teamwork to ensure quality guest care during all operating hours.Adhere to company policy on vehicle care and operation.Perform physical tasks including lifting and standing for extended periods.Equal Opportunity Goodyear is an Equal Employment Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other characteristic protected by law. If you need accessibility assistance, please contact us at the provided number.#J-18808-Ljbffr

Central Supply Technician -Sterile Processing - Full Time

Guthrie Corning, NY

Position SummaryResponsible for performing decontamination, high level disinfection and sterilization of medical/surgical and gastroenterology instruments/equipment. Prioritization and coordination of work for OR, clean and leak test endoscopes, assist with the assembly of case carts for OR, maintenance of event related sterility and monitoring of instrument repair.ExperienceHigh school diploma or equivalent required.Has successfully passed a nationally accredited central service exam for central service technicians; and holds and maintains one of the following credentials administered by a nationally accredited central service technician credentialing organization: Certified Registered Central Service Technician (CRCST) credential; Certified Sterile Processing and Distribution Technician (CSPDT) credential; or a substantially equivalent credential.Provides evidence that the person was employed or otherwise contracted for the services as a central service technician in a healthcare facility for a cumulative period of one year, occurring within the four years immediately prior to January 1, 2015; or a central service technician who does not meet the requirements shall have 18 months from the date of hire to obtain the certified registered central service technician credential or the certified sterile processing and distribution technician credential.Essential FunctionsCompletes assignment as per unit policy. Demonstrates proper knowledge of instruments and instrument sets. Participates and actively supports CQI activities. Completes annual education update. Assists in orientation of new personnel to the department, as well as developing skills of other staff members when requested or appropriate, Endo Techs, Nurses or Students. Demonstrates unit specific competencies and in cross‑trained areas. OR / Endo. Demonstrates good judgement and planning when responding to requests or questions, with an appreciation of cost and quality. Responds readily to staffing needs, schedule/assignment changes CP, Endo and OR. Refers concerns to the appropriate person in order to pursue problem resolution through proper chain of command. Follows Standards of Practice. Respects at all times the confidentiality of patients. Readily assists, supervises, delegates or consults with other staff members when requested or appropriate. Requests assistance from others as needed. Demonstrates ability and judgement to coordinate simultaneous work requirements. Completes all scheduled assignments without sacrificing quality of work performed. Demonstrates flexibility to adjust personal schedule to the fluctuating workload, demands of the department and availability to specific units where cross‑training has been completed. Completes all assigned duties during the shift and utilizes additional time to assist others in the best interests of the department. Uses time between assignments to order and stock supplies, and maintain work area in ready condition at all times. Consistently demonstrates the ability to recognize priorities and deal with them appropriately. Reports to and discusses with the departmental manager any suggestions or recommendation for improvements in department policies, procedures and operations. Demonstrates willingness to learn new procedures and accept new responsibilities. Willingness to cross‑train to specific jobs as appropriate. Schedules benefit time appropriately/acceptable attendance. Follows Standard Precautions and utilizes disease specific precaution as per CDC guidelines. Provides timely notification for absence or tardiness (4 hours for 3‑11; 1 hour for 7‑3). Arrives on time at start of scheduled shift and returns promptly after breaks and lunch periods. Observes dress code; wears identification badge while on duty as appropriate, and maintains a professional appearance at all times. Displays positive attitude/working relationship toward all internal and external customers. Maintenance of event related sterility. Assists in the pulling of cases as needed. Strictly adheres to Central Processing policies & procedures. Demonstrates knowledge of decontamination of all surgical instruments and endoscopes. Demonstrates knowledge of all equipment used in sterilization; i.e. sterilizers and steris processor, sonic washer, pasteurizer, Sterrad. Demonstrates understanding of Bowie Dick Test and what steps to take if it is positive for CP or OR. Demonstrates how to maintain Sterility and Implant Log for all sterilizers, cidex and Steris processors in CPD, OR, and Endoscopy, and keeps documentation current. Demonstrates how to re‑call equipment based on sterility monitoring if needed.ShiftsShifts may vary. (6am-2:30pm; 8am-4:30pm; 10am-6:30pm; 1pm-9:30pm, or on call)Pay Range$17.57 - $25.32/hour, DOE#J-18808-Ljbffr

Museum Facility Systems Technician

The Corning Museum of Glass Corning, NY

A cultural institution located in Corning, NY is seeking a Building Maintenance Mechanic to manage the preservation and maintenance of facilities. This role involves performing repairs, ensuring safety and compliance with regulations, and maintaining grounds. Candidates should have a high school diploma and strong problem-solving skills. The position offers a salary range of $22.50 to $29.81 per hour, requiring flexibility in hours.#J-18808-Ljbffr

Central Supply & Inventory Technician

Guthrie Corning, NY

A leading healthcare provider in New York seeks a Central Service Technician responsible for the decontamination and sterilization of medical instruments. Candidates must have a high school diploma, appropriate certifications, and at least one year of relevant experience. The role requires effective teamwork, attention to detail, and the ability to adapt to varying shifts. The hourly pay range is between $17.57 and $25.32, depending on experience.#J-18808-Ljbffr

Licensed Veterinary Technician at Corning Animal Hospital

Heartland Veterinary Partners LLC South Corning, NY

OverviewCorning Animal Hospital is seeking a licensed veterinary technician to join our team. Our busy small animal family practice has been providing excellent care in the same location for over 60 years.We are a detail-oriented practice with 30-minute appointments and an emphasis on client education.We welcome new graduates and experienced technicians to apply.Our technicians get to make use of many skills, including, but not limited to: patient care and restraint, medical and surgical nursing, taking digital radiographs (including dental), ECG/telemedicine, running and maintaining in-house lab equipment, collecting and processing lab specimens, anesthesia monitoring and charting, dental cleaning, charting and assisting, endoscopy, client communications, record keeping and more. We strive to maintain a supportive, flexible, and friendly environment.CompetenciesPatience & Compassion: Remaining professional while still making teammates, clients, and patients feel as comfortable as possible regardless of the situation or challenges presented. Responding quickly and calmly to crisis while maintaining a high standard of patient care.Collaboration & Teamwork: Carefully coordinating actions with veterinarians and practice team members. Providing feedback appropriately and in a timely manner. Quickly incorporating feedback to ensure positive results. Sharing ideas and being open to other’s ideas.Communicating : Conveying instructions to clients and teammates to ensure successful patient care.Active Listening: Following the instructions of veterinarians and sometimes patient owners. Picking up on the needs of veterinarians and teammates based on prior experiences and feedback.Organization Skills : Clear tracking of lab specimens, medications, patient instructions, workflow, and other job-related items while managing multiple patients and clients.Client Satisfaction : Ensuring all activities and interactions result in the highest level of client satisfaction.Essential ResponsibilitiesAssist veterinarians in the practice of veterinary medicine and surgery and other tasks as needed.Assist veterinarians in outpatient exams by taking histories, vital signs, and weights, as well as providing client education.Prepare patients for surgery and monitor vital signs of the patient during surgery.Obtain blood, stool, and other samples; perform in-hospital laboratory testing and prepare specimens for outside laboratories.Take, develop, and maintain radiographs following proper safety procedures.Provide basic animal handling and restrain animals during exams.Administer and monitor medications, anesthesia, vaccines, and treatments at the discretion of the veterinarian.Clean and straighten exam rooms, treatment, and lab areas; restock exam rooms with supplies. Assist other team members to keep the public areas of the practice clean; clean and maintain all medical equipment.Demonstrate warmth, courtesy and professionalism in all interactions with clients; exercise compassion and care in all interactions with patients.Communicate with veterinarians and practice team members including client discussions, patient plans, client concerns, etc.Any other duties as assigned.Requirements/QualificationsState license to work as a certified/licensed/registered veterinary technician in state of desired employmentAbility to lift patients and carry equipment up to 25 pounds; ability to lift patients or carry equipment over 25 pounds with assistancePractice OSHA safety techniques including proper PPEBasic computer skills, familiarity with MS office applications, etc.Basic math and ability to calculate medication dosagesStrong communication skills to ensure patient safetyBenefitsPaid time offHealth, dental, and vision insuranceRetirement benefits (401k, Roth k and matching)Bonus incentiveCareer and professional developmentState licensing fee reimbursementEmployee Assistance ProgramEmployee Referral ProgramPet Care Credits and Employee DiscountsBenefits offered may vary depending on full or part time employment status according to company policy.Pay RangeUSD $23.00 - USD $27.00 /Hr.#J-18808-Ljbffr

Work Life Balance

Field Equipment Technician – Heavy Machinery

Altec Corning, NY

A leading equipment manufacturer in Corning is seeking a skilled equipment mechanic to join its team. Responsibilities include replacing electrical, hydraulic, and mechanical components, and providing excellent customer service. The ideal candidate has experience with heavy equipment and a diploma or GED. We offer competitive pay between $37-$41 per hour, comprehensive benefits, and opportunities for overtime. Join a family-owned company committed to safety and quality in the essential industry supporting utilities.#J-18808-Ljbffr

Posted 23 hours ago

Process Technician

Corning Corning, NY

Process TechnicianDate: Apr 8, 2026Location: Corning, NY, US, 14831Company: CorningRequisition Number: 70483The company built on breakthroughs. Join us. Corning is one of the world's leading innovators in glass, ceramic, and materials science. From the depths of the ocean to the farthest reaches of space, our technologies push the boundaries of what's possible. How do we do this? With our people. They break through limitations and expectationsnot once in a career, but every day. They help move our company, and the world, forward.At Corning, there are endless possibilities for making an impact. You can help connect the unconnected, drive the future of automobiles, transform at-home entertainment, and ensure the delivery of lifesaving medicines. And so much more.Come break through with us. Our Optical Communications segment has recently evolved from being a manufacturer of optical fiber and cable, hardware and equipment to being a comprehensive provider of industry-leading optical solutions across the broader communications industry. This segment is classified into two main product groupingscarrier network and enterprise network.PRODUCTION AND MAINTENANCE - PROCESS TECHNICIANApplication Process The following information is relative to Production and Maintenance employment at Corning Incorporated in the Corning Valley: The Employment Process: For all Production and Maintenance positions at Corning Incorporated in the Corning Valley begins once you attach your resume and submit a completed application. The next step in the process will be an orientation at a local venue to be determined. The orientation will be followed by a series of tests and interviews conducted by Corning Incorporated employees. Upon successful completion of all of the above, the next step will be background checks and a medical exam, to include a physical assessment and a drug test. Qualified candidates are included in a pool for process tech production positions and will be called upon as openings occur in our businesses. Corning Incorporated interviews applicants for self-managed teams and we are looking for individuals that possess a strong work ethic and substantial interpersonal and team participation skills. Our new employees will go through a 90 day probationary period. Production and Maintenance employees are represented by USW Local 1000. No relocation assistance.Duties and Responsibilities: Sets up, assembles, maintains, monitors and operates equipment in various operations such as pilot production, research, development labs and department labs and shops. Work with supervisors, scientists, engineers, other technicians and/or self-directed, perform a wide variety of tasks. May require working shifts, holidays and weekend assignments. Work Conditions: Work hours vary and you may be moved depending on the respective needs of the company. Economic cycles may dictate a need to reduce employees. Reductions occur based on a valley-wide single seniority system.Requirements: Must be at least 18 years of age. Must be able to lift a minimum of 50 pounds. Education Requirements: 2 year (AAS) technical degree from an accredited institution is required. This position does not support immigration sponsorship.The starting pay for this position is $35.35 hourly rate. Compensation and benefits available for this position are dictated by the appropriate Collective Bargaining Agreement. Corning offers you the total package. Your well-being is our priority. Our compensation and benefits package supports your health and wellness, financial, and career from day one As part of our commitment to your financial well-being, we provide a 100% company-paid pension benefit that grows throughout your career. We also offer a 401(k) savings plan with company matching contributions. Our health and well-being benefits include medical, dental, vision, paid parental leave, family building support, fitness, company-paid life insurance, disability, and disease management programs. Company-wide bonuses and long-term incentives, align with key business results and ensure you are rewarded when the company performs wellwhen Corning wins, we all win. Corning offers a peer-to-peer recognition program to celebrate success by recognizing colleagues who demonstrate above-and-beyond behaviors. We prohibit discrimination on the basis of race, color, gender, age, religion, national origin, sexual orientation, gender identity or expression, disability, veteran status or any other legally protected status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. To request an accommodation, please contact us at [email protected].

High salary

Plant Technician

POET Corning, IA

Plant TechnicianThe Plant Technician is responsible for the operation of all plant processing equipment and performing routine basic maintenance in a highly automated chemical facility. In the area of maintenance, Plant Technicians are responsible for the safe and efficient maintenance, basic repair, and cleaning of all equipment associated with bioprocessing processes. At times, Plant Technicians may be asked to assist Maintenance Technicians in more technical and complex maintenance procedures. Team members in this position are required to maintain knowledge of the process flow, computerized equipment, and be aware of hazards associated with the process as well as understand and execute standard operating procedures (SOPs). Continuous plant operation requires 12-hour shift work. Plant Technicians must be able to adapt to 12-hour workdays and be able to meet call-in requirements as needed.Use your knowledge to maintain and operate all processes associated with the plant where required.Perform maintenance and basic repairs of plant equipment and document these activities.Operate the DCS (Distributed Control System) for the plant.Safely perform basic electrical troubleshooting.Follow procedures for plant start-up, shut-down, cleaning, and batching.Maintain accurate and timely logs.Collect and test quality control samples, interpret QA/QC results and make adjustments to optimize plant operations, timely and accurately document results and enter results into our data collection system, PI.Assist in removal, installation, rebuild, and performance of preventive and predictive maintenance on all equipment associated with plant processes.Help keep your plant clean by following the sanitation schedule and completing all tasks as assigned.Notify the management team of safety, environmental, quality, and production concerns, problems, and opportunities.Keep your plant safe by fostering a culture of safe behavior and environmental compliance.Maintain a team environment at all times and champion POET in the community.Since we're all about teamwork and getting the job done, your skill may be put to a lot of other uses!High school diploma or equivalent required.Experience requirements:Plant Technician I: experience in a production environment preferred.Plant Technician II: Documented successful performance as a Plant Technician I or equivalent work experience required.Plant Technician III: Documented proficiency in the skills listed in the Plant Technician III Skills Checklist.Working knowledge in math, reading comprehension, and mechanical reasoning is required.Strong troubleshooting and problem-solving skills are required.Experience with software systems, such as Maximo, preferred.Excellent organizational, time management, and communication skills as well as the ability to embrace change.You have the ability to understand the technical and day-to-day operation of a bioprocessing facility.You know the basics of Microsoft Office Suite. You're capable of learning new programs.Team members will be required to adhere to all safety requirements at all times and in all work environments. This position is exposed to work in multiple environments, including plant, laboratory, and office environments. You may be exposed to high noise levels, moving mechanical parts, dusty conditions, internal and external temperature/weather conditions, and chemicals.Due to the physical and safety-sensitive nature of this job, you will be subject to a physical and expected to pass a drug screen during the pre-screen process. During employment, you'll be subject to random drug and alcohol testing.This role has some physical requirements that our team members will need to be able to perform, such as:Wearing Personal Protective Equipment (PPE) such as hard hats, gloves, safety glasses, steel-toed boots, hazardous material suits, hearing protection, and harness.Working at extreme heights (approximately 150 ft), in confined spaces, and in extreme temperatures from -20 to +100 degrees Fahrenheit, both indoors and outdoors. Due to the nature of the work, the areas can be dusty at times.Must be able to use the following equipment/tools, with training provided (not all-encompassing): forklift, power washer, pallet jack, hoist systems, scissor lifts, JLG lifts, telehandlers, Front-End Loaders, various hand tools, and computers.Frequently:Sitting in a chair in the Control Room while operating the plantWalk indoors and outdoors, sometimes over rough, uneven, or wet/slick surfacesCarry to up to 15lbsClimb stairs and/or laddersStand indoors to clean and maintain areasReach at arm's length to gather samplesBe in awkward back, shoulder, wrists, and hand positionsUse coordination and grip, with a force of up to 50lbsBend while standingUse repetitive arm motions to wipe down and maintain the work areaClimb in and out of Powered Industrial VehiclesOccasionally:Lift up to 50lbs, with or without assistanceCarry up to 40 lbs, with or without assistancePush with a force of 10lbs, with or without assistancePull with a force of up to 85lbs, with or without assistanceBend, twist, turn, kneel, and crouch while holding light and medium-weighted objectsSince we are all about team work, you may be asked to help other roles that have their own unique set of physical requirements.We're all on the same team. We always communicate. And we park our egos at the door. These aren't just slogans on our walls. It's the way we do things at POET. We provide an environment for team members to maintain a healthy work-life balance. It's the best way to optimize health, wellness, and productivity in a sustainable way. We work hard. We play hard. We have frequent team events, volunteer efforts, and we know how to celebrate wins!At POET we encourage internal development and growth by allowing team members to carve their own path to success. Leaders support team members with the necessary resources to develop their skills, achieve goals, and create the most value. We believe in developing our team members to their highest potential and recognizing contributions that add value to the organization. Each new team member's position and compensation are carefully determined by considering their unique qualifications and skillset.POET is an Equal Opportunity Employer committed to maintaining a workplace free from discrimination and harassment. Employment decisions are based on qualifications, abilities, merit, and other legitimate business factors, without regard to any legally protected characteristic. This policy applies to all aspects of employment, including recruitment, hiring, compensation, benefits, working conditions, promotion, and termination.

Immediate Start

Patient Care Technician - Emergency Services - Full Time

The Guthrie Clinic Corning, NY

Patient Care TechnicianUp to a $5,000 sign-on bonus availablePosition Summary:Provides general support tasks (clinical and non?clinical) for assigned patient care area. Works with other members of the patient care team to deliver care to patients in age groups including newborns, infants, children, adolescents, adults, and geriatrics. In addition, the Patient Care Technician performs venipuncture when available.Education, License & Cert:Specific previous phlebotomy experience and/or phlebotomy courses in a phlebotomy program are preferred. Certification highly preferred. Good communication skills including the proper use of grammar and lab technical terms Previous patient care experience preferred, but not required. Previous phlebotomy experience preferred, but not required.Essential Functions:Performs routine and specialized phlebotomy procedures Venipuncture Skin Puncture Assisting with line draws Participates in the delivery of patient care for patients of all age groups under the direction of an RN including but not limited to the following Lifting, turning, and positioning patients Observing confused and difficult patients Toileting, Peri care Mobilizing patients ? transfers and ambulation D/C IV's and indwelling foley catheters Crutch Training Apply Restraints Stocking Department Post Mortem Care Assist patients out of private vehicle/ambulances Function as a sitter for patient's requiring 1:1 observation Assisting radiology staff with patient transfers during radiology studies Performs and records the following specimen collection: Obtains urine, stool, and sputum specimens for patients of all age groups; instructs patients in proper specimen collection technique. Point of care testing to include glucometry Actively participates in and documents quality controls on all procedures as required in testing protocol Actively participates in the Quality Assurance Program as required by the Laboratory and regulatory Agencies Completes EKG's Participates in patient safety/patient satisfaction: Correctly identifies patient, labels specimen accurately and follows the policy for obtain specimens. Answers call bells promptly. Reports need for equipment repair. Maintains neat and tidy environment (empties laundry, delivers equipment, keeps rooms clean and safe).Other Duties:Performs errands in a timely manner including but not limited to the following Make photocopies Transports blood products to and from the patient care area. Maintains inventory of patient care area specific supplies. Maintains CPR Practice yearly. Complies with policies and procedures of the hospital/nursing department and maintains patient confidentiality with respect to accessing patient records and adheres to all corporate compliance regulations. Represents the hospital to patients/families and healthcare team in a professional, courteous manner while being sensitive to how others perceive both verbal and non?verbal communications. Answers telephone promptly and politely, and demonstrate phone proper phone etiquette by identifying self, title, and department. Supports the philosophy of the hospital and department of nursing. Demonstrates willingness to accept non?routine work assignments as appropriate within scope of practice. Assists with orientation of new Patient Care Technicians. Demonstrates cost?effective patient care by demonstrating proper use and care of equipment, appropriate and prudent use of supplies, accurate charging of supplies; performing other division?specific tasks, and appropriate utilization of available resources. Demonstrates initiative in completing work that needs to be done as defined in my areas of responsibility. Checks e?cylinders/regulators. Recognizes emergency situations and initiates plan of action. Participates in performance improvement activities to improve service and care. Is authorized to access secured storage areas in the performance of essential job functions and duties.Pay Range: $17.68 -$26.25 per hour

Patient Care Technician - Emergency Services - Per Diem

The Guthrie Clinic Corning, NY

Patient Care TechnicianProvides general support tasks (clinical and non?clinical) for assigned patient care area. Works with other members of the patient care team to deliver care to patients in age groups including newborns, infants, children, adolescents, adults, and geriatrics. In addition, the Patient Care Technician performs venipuncture when available.Specific previous phlebotomy experience and/or phlebotomy courses in a phlebotomy program are preferred. Certification highly preferred. Good communication skills including the proper use of grammar and lab technical terms Previous patient care experience preferred, but not required. Previous phlebotomy experience preferred, but not requiredPerforms routine and specialized phlebotomy procedures Venipuncture Skin Puncture Assisting with line draws Participates in the delivery of patient care for patients of all age groups under the direction of an RN including but not limited to the following Lifting, turning, and positioning patients Observing confused and difficult patients Toileting, Peri care Mobilizing patients ? transfers and ambulation D/C IV's and indwelling foley catheters Crutch Training Apply Restraints Stocking Department Post Mortem Care Assist patients out of private vehicle/ambulances Function as a sitter for patient's requiring 1:1 observation Assisting radiology staff with patient transfers during radiology studies Performs and records the following specimen collection: Obtains urine, stool, and sputum specimens for patients of all age groups; instructs patients in proper specimen collection technique. Point of care testing to include glucometry Actively participates in and documents quality controls on all procedures as required in testing protocol Actively participates in the Quality Assurance Program as required by the Laboratory and regulatory Agencies Completes EKG's Participates in patient safety/patient satisfaction: Correctly identifies patient, labels specimen accurately and follows the policy for obtain specimens. Answers call bells promptly. Reports need for equipment repair. Maintains neat and tidy environment (empties laundry, delivers equipment, keeps rooms clean and safe).Performs errands in a timely manner including but not limited to the following Make photocopies Transports blood products to and from the patient care area. Maintains inventory of patient care area specific supplies. Maintains CPR Practice yearly. Complies with policies and procedures of the hospital/nursing department and maintains patient confidentiality with respect to accessing patient records and adheres to all corporate compliance regulations. Represents the hospital to patients/families and healthcare team in a professional, courteous manner while being sensitive to how others perceive both verbal and non?verbal communications. Answers telephone promptly and politely, and demonstrate phone proper phone etiquette by identifying self, title, and department. Supports the philosophy of the hospital and department of nursing. Demonstrates willingness to accept non?routine work assignments as appropriate within scope of practice. Assists with orientation of new Patient Care Technicians. Demonstrates cost?effective patient care by demonstrating proper use and care of equipment, appropriate and prudent use of supplies, accurate charging of supplies; performing other division?specific tasks, and appropriate utilization of available resources. Demonstrates initiative in completing work that needs to be done as defined in my areas of responsibility. Checks e?cylinders/regulators. Recognizes emergency situations and initiates plan of action. Participates in performance improvement activities to improve service and care. Is authorized to access secured storage areas in the performance of essential job functions and duties.Pay Range: $17.68 -$26.25 per hour

HVAC Technician

Cargill Corning, MO

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Nebraska City, NE Job Type: Full Time Shift(s) Available: 2nd Compensation: $28.40 - $29.40 /hr Benefits Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill Matching Contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Using hand tools to perform maintenance on refrigeration/utility machinery Ensuring food safety and quality Cleanliness and housekeeping Responding to radio calls from other departments (production, food safety, safety, etc.) for maintenance related actions Communicating with other departments and other department shifts to ensure proper pass down of maintenance related issues to the next shift Documenting daily work assigned on paper and also in the maintenance management system (SAP) Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Ability to work alone without supervision. Understand and follow job plans Perform preventative maintenance (PM's) and troubleshooting of equipment related to the refrigeration/utility department Able to do basic math calculations, example: addition, subtraction, multiplication and division. Have basic computer skills and ability to read/write/speak English Ability to pass physical examination in order to don and doff SCBA Ability to learn and use SAP to document work hours and search for parts Able to work in cold environment 40 degrees or less for up to twelve (12) hours per day and able to work standing for up to twelve (12) hours per day Use measuring devices to accurately measure different areas of equipment using the metric or standard system. Use multimeters, megohmmeters, and any other test equipment needed to aid in the troubleshooting and repair or equipment Basic knowledge of hand-tools and mechanical aptitude Basic ability to perform tasks related to the upkeep of building and grounds Able to use a powered industrial truck (PIT) or eligible to acquire license and maintain the license Ability to learn RETA certification information and pass Ammonia Operator classes Preferred Qualifications 2 year degree in refrigeration related field Previous production or maintenance experience Meat processing experience Food handling experience Certification or refrigeration experience Power equipment experience Please note that this position does not include relocation reimbursement Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Posted 23 hours ago

Patient Care Technician

Davita Inc. Corning, NY

Posting Date03/26/20268 West Pulteneny StSuite 101, Corning, New York, 14830-2267, United States of AmericaDaVita is hiring a Patient Care Technician (PCT) to support patients with end-stage renal disease in an outpatient dialysis clinic. As a PCT, you'll provide direct, hands-on care under RN supervision, helping patients through life-sustaining dialysis treatment.Key ResponsibilitiesDeliver safe, hygienic, and compassionate dialysis careMonitor patients before, during, and after treatmentSet up and maintain dialysis equipmentRecord vital signs and patient dataEducate patients on treatment and kidney healthCollaborate with nurses, dietitians, social workers, and other care team membersRequirementsAccredited High School diploma, general education development ("GED") credential, or equivalentComfortable around blood, needles, and medical equipmentPhysically able to work long shifts on your feetWilling to float between local clinics if neededFlexible schedule including mornings, evenings, weekends, and holidaysPreferred: CNA, MA, CHT, phlebotomy certification, or healthcare experienceWhat We OfferPaid training with ongoing education and career pathsFull benefits: medical, dental, vision, 401(k) match, paid time offFamily support: backup child/elder care, Headspace, EAP, parental leaveCareer development Programs: Clinical Ladders, Bridge to Your Dreams RN programStart your healthcare career with DaVita-apply now!#LI-DA2At DaVita, we strive to be a community first and a company second. We want all teammates to experience DaVita as "a place where I belong." Our goal is to embed belonging into everything we do in our Village, so that it becomes part of who we are. We are proud to be an equal opportunity workplace and comply with state and federal affirmative action requirements. Individuals are recruited, hired, assigned and promoted without regard to race, national origin, religion, age, color, sex, sexual orientation, gender identity, disability, protected veteran status, or any other protected characteristic.This position will be open for a minimum of three days.The Wage Range for the role is $19.50 - $29.50/hour.Patient Care Technician ICHD Intermediate: $20.25 - $21.50/hour. If a candidate is hired, they will be paid at least the minimum wage according to their geographical jurisdiction and the exemption status for the position.New York Exempt: New York City and Long Island: $66,300.00/year, Nassau, Suffolk, and Westchester counties: $66,300.00/year, Remainder of New York state: $62,353.20/year New York Non-exempt: New York City and Long Island: $17.00/hour, Nassau, Suffolk, and Westchester counties: $17.00/hour, Remainder of New York state: $16.00/hourFor location-specific minimum wage details, see the following link: DaVita.jobs/WageRatesCompensation for the role will depend on a number of factors, including a candidate's qualifications, skills, competencies and experience. DaVita offers a competitive total rewards package, which includes a 401k match, healthcare coverage and a broad range of other benefits. Learn more at benefits Colorado Residents: Please do not respond to any questions in this initial application that may seek age-identifying information such as age, date of birth, or dates of school attendance or graduation. You may also redact this information from any materials you submit during the application process. You will not be penalized for redacting or removing this information.

Transmission Technician

Corning Ford Corning, CA

Transmission TechnicianWe are looking for a Transmission Technician to join our growing team! You'll be diagnosing, servicing, and repairing transmission systems in vehicles: inspecting parts, replacing worn or damaged components, performing fluid changes, and utilizing diagnostic tools to verify functionality through test drives.By working at a Ford dealership, you can be a part of a brand that honors the past, and is invested in the future. Join the Ford Family where we value service to each other and the world as much as to our customers!Benefits:Competitive Pay - Flat Rate (Based on Experience)Health, Medical, Dental, and Vision401K PlanPaid time off and vacationPaid trainingGrowth opportunitiesEmployee vehicle purchase plansFamily owned and operatedLong term job security (low turnover)ResponsibilitiesPerform work specified on the repair order with efficiency and in accordance with dealershipTest-drive vehicles, and test components and systems, using diagnostic tools and special service equipmentDiagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc.Communicate directly with the Service Advisor so that customers are informed if any additional service is needed.Provide an estimate of time needed for additional repairsExecute repairs under warranty to manufacturer specificationsQualifications2+ years of Service Technician experience preferredHigh school diploma or equivalentFord Certification preferredValid driver's license and clean driving record (DMV Printout Required)B level qualifications, including Diagnostic, Electrical and Engine RepairDexterity, requiring a steady hand, excellent hand-eye coordinationMechanical and troubleshooting skills and ability to operate electronic diagnostic equipmentExcellent customer service skills and basic computer competenciesTeammate with ability to collaborate with others effectivelyAbility to learn new technology, repair and service procedures and specificationsWe are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.