Information Services Technician jobs in Crawford

HVAC - Install Technician - Lead

Overview At Jordan Air , we're looking for a HVAC - Install Technician - Lead to join our rapidly growing team. Step into an environment built on transparency and collaboration, with a hands-on management team that supports and challenges you to grow. You'll have access to the tools, regular training, and resources you need to excel. We offer clear paths for advancement, a collaborative culture, and a team that recognizes and rewards hard work. Join Jordan Air and be part of a company that supports your growth while helping you make a difference for our customers every day. Your skills are essential to our success, and we're here to help you achieve your career goals. What You'll Do: Perform HVAC installations with attention to detail and quality. Collaborate with team members and other departments to optimize processes and ensure seamless operations. Drive and maintain company vehicles to ensure safety and efficiency. Serve customers by analyzing work orders, following daily travel schedules, listening to customer concerns, performing designated work, and proactively solving problems Cooperate with other departments to continually improve the process and flow of information For each installation job, request necessary parts & equipment needed in advance and verify truck is loaded properly with all materials needed to complete it Document work performed in accordance with company procedure Provide guidance to assistants or apprentices and share knowledge Keep personal tools and equipment operable and up to date Maintain current knowledge of HVAC codes and standards Maintain professional conduct and appearance in all working conditions All other duties and responsibilities as assigned by supervisor/manager What You Need: Minimum 5 years of residential HVAC installation experience. Valid local driver's license with a clean driving record. Strong mechanical aptitude and customer service skills. Ability to work independently, make informed decisions, and manage multiple tasks effectively. Proficiency in the safe use and maintenance of HVAC tools and equipment. Must pass a drug screen, background record and motor vehicle record Strong customer service skills Strong mechanical aptitude Ability to exercise independent judgment and make appropriate decisions Ability to organize and manage multiple tasks Ability to work synergistically with crew partner(s), also independently and accurately Knowledgeable and skilled in the safe use and maintenance of required tools What We Offer: Birthday Pay Paid Holidays Comprehensive Benefits - Medical, prescription, dental, and vision plans to keep you and your family healthy. Security & Growth - Disability and term life insurance, plus matching 401(k) benefits. Paid Time Off - Recharge with generous PTO and paid holidays.

Quick Apply

Diesel Technician

Kingmor Supply, Inc. Mount Crawford, VA

Diesel Technician Department: Service Reports To: Service Manager Overview Our Technician is responsible for performing high-quality maintenance and repairs on International Motors and IC Bus vehicles. This role ensures safety, customer satisfaction, and efficient operations by following established repair procedures and maintaining a clean and organized workspace. Benefits Health Insurance 401(k) Retirement Plan Paid Time Off (PTO) Competitive Wages Key Responsibilities Prepare for service events by reviewing repair orders, gathering necessary information, securing tools, and ensuring timely access to required parts. Perform maintenance and repairs accurately and safely by following established standards—conducting inspections, sourcing additional information or parts, managing deviations, and returning unused or core parts. Document work thoroughly by clearly describing completed repairs in the repair order, clocking off appropriately, completing handovers when needed, and coordinating the next job to maintain workflow. Apply technical expertise in troubleshooting, repair methods, vehicle systems, and proper tool usage to service International Truck and IC Bus products. Maintain up-to-date product knowledge of International and IC Bus offerings, applying this to align customer solutions with the company’s value proposition. Promote safety and compliance by coaching on best practices, ensuring equipment is maintained, and following all health and safety policies and regulations. Mentor coworkers and apprentices through hands‑on coaching, knowledge sharing, and guidance to encourage skill growth and team success. Communicate effectively with team members, leadership, and customers to promote understanding, build trust, and encourage collaboration. Deliver exceptional customer service by maintaining strong relationships, understanding needs, and providing professional, timely support. Take ownership of challenges and opportunities by addressing issues promptly, finding practical solutions, and continually seeking process improvements. General Knowledge and Skills You Will Need Maintain up-to-date knowledge of International and IC Bus products and services, applying this understanding to daily tasks and aligning customer solutions with the company’s overall value proposition. Apply knowledge of International’s repair and maintenance procedures , including troubleshooting techniques, technical vehicle systems, tools, and documentation, to effectively service and repair International Truck and IC Bus products. Communicate clearly and respectfully with team members, leadership, and customers to promote understanding, build trust, and encourage open dialogue. Motivate and encourage team members to strive for excellence by fostering confidence, resilience, and a shared commitment to team goals in a supportive and success‑oriented environment. Effectively plan and organize daily tasks by setting clear priorities and using available resources to meet goals that support overall team and organizational success. Identify and solve routine issues by developing practical, cost‑effective, and customer‑friendly solutions that align with service expectations. Uphold and promote a safe, healthy, and compliant work environment by following and reinforcing safety policies, procedures, and regulations. Utilize software systems and digital tools effectively to perform job‑related tasks, streamline workflows, and support accurate, efficient service delivery. Desired Education and Experience Medium or heavy‑duty technician, equivalent experience or qualification Applicable certifications related to industry, products, and/or safety Currently maintains or can obtain a Commercial Driver’s License (CDL) International Master Certified We are an Equal Opportunity Employer. #J-18808-Ljbffr

Dynamic Environment

HVAC Controls Technician

Riddleberger Brothers, Inc. Mount Crawford, VA

**Riddleberger Brothers, Inc. is seeking to hire a talented and growth-minded individual to join our team as a Commercial HVAC Controls Technician.**We offer career opportunities that allow you to be part of a team and grow as an individual.**We offer you:*** Competitive pay* Comprehensive benefits package* Apprenticeship opportunities with a pathway to licensure* Growth and development opportunities* Scholarship program for our employees’ children* Discounts at major automotive, computer, and cell phone companies* Employee referral incentives* Available with certain positions, where necessary/required: + Company mobile phone and/or tablet + Company vehicle + Company uniforms* And much more!**Our benefits package offers you:*** Medical, Dental, Vision, and Life Insurances* Short-Term and Long-Term Disability Insurances* Accidental Death & Dismemberment Insurance* Health Care and Dependent Day Care FSA's* Health Savings Account (HSA)* Employee Assistance Program (EAP)* 401(k) Plan with Roth IRA option* Pet Insurance* Annual Bonus* Generous Vacation, Holidays, and Sick Time* And much more!We are a full-service plumbing, mechanical, HVAC service, controls, and design-build company.* Main office is located at 6127 South Valley Pike, Mount Crawford, VA 22841* Parent Company - Comfort Systems USA ()**Primary purpose of this position:**Perform installation, diagnosis, troubleshooting and repair of HVAC Building Automation and controls systems.**Specific Job Duties:*** Possess extensive knowledge and experience with programming, troubleshooting, and repairing building automation and control systems* Possesses previous experience working with Honeywell WEBS, LON, BACnet, Tridium, JCI Facility Explorer control systems* Possess extensive knowledge and experience with programming, troubleshooting, and repairing building automation and control systems* Possess analytical and problem-solving skills for resolution of engineering problems and understanding of technical data* Ability to install Building Automation Systems from drawings, submittals and specifications* Possess excellent communication and customer services skills* Ability to work independently without direct supervision* Knowledge of HVAC Mechanical equipment: Large Split systems, Chillers, Boilers, VAV’s, Water Source Heat Pumps, CW/HW pumps and starters, etc.* Maintains, inspects, and repairs pneumatic and electronic, electric DDC HVAC system controls.* Performs troubleshooting tasks, including problem diagnosis, identification and isolation.Discusses system malfunctions with users to assist in isolation of problem. Determines appropriate action for problem resolution.* Uses TAB techniques to perform diagnostic duties and make repairs to systems.* Inspects systems to verify system compliance with plans and specifications and to detect malfunctions in system component parts.* Studies building system design, as-built blueprints, HVAC systems diagrams, technical specifications and system configurations. Tests component and system performance to determine the need for adjustment or repair, develop methods to resolve performance problems in the most efficient and cost-effective manner.* Programs, designs and modifies HVAC sub-systems of electronic building automation systems.* Consults with engineers and contractors as necessary regarding system operation and configuration.* Orders appropriate materials, components, and equipment necessary for efficient system operation.* Performs other related work as required in support of general HVAC maintenance activity.**Other Requirements:*** High School Diploma or GED* Minimum 4 years of experience in the trade, which may include an apprenticeship and/or applicable vocational training, should include some experience in HVAC trade as a service or maintenance technician.* Minimum 2 years automated system controls-related experience or equivalent formal training in automated systems controls operations* Knowledge of the test and diagnostic equipment and instruments and hand and power tools used in this work* Ability to read and analyze building blueprints and HVAC systems diagrams and specifications* Tridium Niagara N4 certification a plus* Punctual and regular attendance* Ability to work on a team and interact with people* Ability to communicate effectively with engineers, craftsmen, contractors, vendors and system users orally and in writing* Valid driver’s license and ability to meet company driver qualification policy* Follow and adhere to all company safety requirements and processes* Work flexible hours as needed#J-18808-Ljbffr

HVAC Controls Technician

Comfort Systems USA, Inc. Mount Crawford, VA

HVAC Controls Technician

Comfort Systems USA Mount Crawford, VA

Riddleberger Brothers, Inc. is seeking to hire a talented and growth-minded individual to join our team as a Commercial HVAC Controls Technician. We offer career opportunities that allow you to be part of a team and grow as an individual. Please click the video below to hear from RBI team members about what they like most about their jobs, and what it's like to build a career at RBI. We offer you: Competitive pay Apprenticeship opportunities with a pathway to licensure Growth and development opportunities Discounts at major automotive, computer, and cell phone companies Employee referral incentives Available with certain positions, where necessary/required: Company mobile phone and/or tablet Company vehicle Company uniforms And much more! Our benefits package offers you: Medical, Dental, Vision, and Life Insurances Short-Term and Long-Term Disability Insurances Health Care and Dependent Day Care FSA's Employee Assistance Program (EAP) 401(k) Plan Annual Bonus Generous Vacation, Holidays, and Sick Time And much more! About us: We are a full-service plumbing, mechanical, HVAC service, controls, and design-build company. Main office is located at 6127 South Valley Pike, Mount Crawford, VA 22841 Primary purpose of this position: Perform installation, diagnosis, troubleshooting and repair of HVAC Building Automation and controls systems. Specific Job Duties: Possess extensive knowledge and experience with programming, troubleshooting, and repairing building automation and control systems Possesses previous experience working with Honeywell WEBS, LON, BACnet, Tridium, JCI Facility Explorer control systems Possess analytical and problem-solving skills for resolution of engineering problems and understanding of technical data Ability to install Building Automation Systems from drawings, submittals and specifications Possess excellent communication and customer services skills Ability to work independently without direct supervision Knowledge of HVAC Mechanical equipment: Large Split systems, Chillers, Boilers, VAV’s, Water Source Heat Pumps, CW/HW pumps and starters, etc. Maintains, inspects, and repairs pneumatic and electronic, electric DDC HVAC system controls. Performs troubleshooting tasks, including problem diagnosis, identification and isolation. Discusses system malfunctions with users to assist in isolation of problem. Determines appropriate action for problem resolution. Uses TAB techniques to perform diagnostic duties and make repairs to systems. Inspects systems to verify system compliance with plans and specifications and to detect malfunctions in system component parts. Studies building system design, as-built blueprints, HVAC systems diagrams, technical specifications and system configurations. Tests component and system performance to determine the need for adjustment or repair, develop methods to resolve performance problems in the most efficient and cost-effective manner. Programs, designs and modifies HVAC sub-systems of electronic building automation systems. Consults with engineers and contractors as necessary regarding system operation and configuration. Orders appropriate materials, components, and equipment necessary for efficient system operation. Performs other related work as required in support of general HVAC maintenance activity. Other Requirements: High School Diploma or GED Minimum 4 years of experience in the trade, which may include an apprenticeship and/or applicable vocational training, should include some experience in HVAC trade as a service or maintenance technician. Minimum 2 years automated system controls-related experience or equivalent formal training in automated systems controls operations Knowledge of the test and diagnostic equipment and instruments and hand and power tools used in this work Ability to read and analyze building blueprints and HVAC systems diagrams and specifications Punctual and regular attendance Ability to work on a team and interact with people Ability to communicate effectively with engineers, craftsmen, contractors, vendors and system users orally and in writing Valid driver’s license and ability to meet company driver qualification policy Follow and adhere to all company safety requirements and processes Work flexible hours as needed If you are interested in: Teamwork Safety and Quality then a career with Riddleberger Brothers, Inc. may be right for you; we strive to work safely and exceed customer expectations! Riddleberger Brothers, Inc. is an Equal Opportunity Employer. Minorities, women, veterans, and individuals with disabilities are encouraged to apply. #J-18808-Ljbffr

Commercial HVAC Controls Technician

Riddleberger Brothers, Inc. Mount Crawford, VA

Overview Riddleberger Brothers, Inc. is seeking to hire a talented and growth-minded individual to join our team as a Commercial HVAC Controls Technician. We offer career opportunities that allow you to be part of a team and grow as an individual. We are a full-service plumbing, mechanical, HVAC service, controls, and design-build company. Primary purpose of this position Perform work in the heating, ventilation and air conditioning trade involving the installation, diagnosis, troubleshooting and repair of electric, electronic and computerized control systems. Specific Job Duties Follow and adhere to all company safety requirements and processes Maintains, inspects, and repairs pneumatic and electronic, electric and DDC HVAC system controls Performs troubleshooting tasks, including problem diagnosis, identification and isolation. Discusses system malfunctions with users to assist in isolation of problem. Determines appropriate action for problem resolution. Uses TAB techniques to perform diagnostic duties and make repairs to systems. Inspects systems to verify system compliance with plans and specifications and to detect malfunctions in system component parts. Studies building system design, as-built blueprints, HVAC systems diagrams, technical specifications and system configurations. Tests component and system performance to determine the need for adjustment or repair; develops methods to resolve performance problems in the most efficient and cost effective manner. Programs, designs and modifies HVAC sub-systems of electronic building automation systems. Orders appropriate materials, components, and equipment necessary for efficient system operation. Other Requirements Minimum 4 years of experience in the trade, which may include an apprenticeship and/or applicable vocational training, should include some experience in the HVAC trade as a service or maintenance technician Minimum 2 years automated system controls-related experience or equivalent formal training in automated systems controls operations Ability to read and analyze building blueprints and HVAC systems diagrams and specifications Valid driver's license and ability to meet company driver qualification policy About us We are a full-service plumbing, mechanical, HVAC service, controls, and design-build company. Main office is located at 6127 South Valley Pike, Mount Crawford, VA 22841 Join us if you are interested in Teamwork Safety and Quality We strive to work safely and exceed customer expectations. Riddleberger Brothers, Inc. is an Equal Opportunity Employer. Minorities, women, veterans, and individuals with disabilities are encouraged to apply. Equal Opportunity Employer, including disabled and veterans. #J-18808-Ljbffr

Quality Assurance / FSQR Technician - Mt. Crawford

Cargill Mount Crawford, VA

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Mount Crawford, VA Job Type: Full Time Shift(s) Available: 1st Compensation: $22.35/hr - $25.24/hr Benefits Information Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Marathon Health Clinic (Employer sponsored health center) Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement/Opportunities to grow Employee Discounts Principal Accountabilities Ensure food safety guidelines are always followed Evaluate and verify sanitation practices for production food safety Ensure compliance with regulations and specifications of incoming raw materials and outgoing product throughput all processes Enforce and audit Good Hygiene Practices All other duties as assigned Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Must have a high school diploma/GED or 1 year of experience in a quality control, production, and/or military role Must have good math skills Must be able to read, write, and comprehend English for paperwork purposes Knowledge of warehousing processes Must be a self-starter and have good communication skills Accuracy, precision, and dependability are a necessity Excellent attendance and safety records required Must be willing to cross-train to work in other areas of FSQR coverage Must be able to work in cold/damp and hot/humid environment. (-35 degrees to 25 degrees) Must work well alone or as a team player Prolonged periods of walking and standing required Ability to work flexible hours. Must be willing to work overtime and weekends as needed Proficient with Microsoft Word and Microsoft Excel Preferred Qualifications Associate or Bachelor degree Previous experience in food / meat plant environment HACCP training Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply. #J-18808-Ljbffr

HVAC Building Automation Technician - Growth & Apprenticeship

Comfort Systems USA Mount Crawford, VA

A leading HVAC services company in Mount Crawford, VA is seeking a Commercial HVAC Controls Technician. This role involves installing, diagnosing, and repairing HVAC control systems. Ideal candidates will have experience with building automation systems, strong communication skills, and the ability to work independently. Join our team to benefit from competitive pay and career growth opportunities.#J-18808-Ljbffr

Production Line Technician

Danone North America Mt Crawford, VA

General Summary The Line Technician is a self-driven/self-motivated individual capable of working proficiently, both independently and as part of a team, without direct supervision. The successful individual must have a passion for safety and be able to foster effective working relationships built upon trust and respect within all levels of the organization. This position safely and efficiently operates assigned equipment to produce quality product at prescribed standards while minimizing material waste and product loss. The position oversees and actively participates in all aspects of line functions. This position rotates across varied filler lines and associated machines within a value stream, mutli-tasks and effectively interacts on a timely basis via appropriate communication media with customers/employees. Line Technician must maintain a thorough knowledge of the operating systems. Essential Duties and Responsibilities Ensure all paperwork is filled out in a clear, legible and accurate format and completed with all required information Effectively tear down, set-up, monitor, operate, changeover and clean applicable equipment and provide quality inspections on all related items to include but not limited to OQI, weight checks, compliance with product specs, etc. Ensure clean and inspect standards are up to date and completed in a timely manner Ensure lubrication standards are up to date and completed in a timely fashion; maintain lubrication logs Maintain working knowledge of all value stream equipment to include all support equipment, ability to troubleshoot, make minor adjustments and repairs using basic tools Completes PM's and other routine operator maintenance tasks; assist in diagnostics, repairs and rebuilds of machines; partner with maintenance or others on non-routine repairs and defect handling. Monitor equipment for malfunctions and defects, repairing and solving minor problems without assistance and eliminating potential threats to production Communicate effectively with supervisors and maintenance personnel regarding recurring problems and needs for repair Take part in PM's and utilize the Root Cause thought process to ensure corrective actions are sustainable Maintain communication with other departments, management and employees and notify them of any problems and/or concerns Utilizing continuous improvement mindset, actively participate in identifying and correcting opportunities to improve processes including participation in the creation and documentation of Standard Operating Procedures and Work Instructions, the creation and maintenance of preventative maintenance standards, the writing of One Point Lessons, and participation in continuous improvement methodology events Follow Good Manufacturing Practices and 5S methodology to maintain a clean, sanitary and safe work area, maintaining audit ready status at all times Actively participate in Pillar activities (i.e. Quality, Focused Improvement, Safety, etc.) including but not limited to observations, inspections, and recommendations. Works diligently to achieve line efficiency goals Assist, train, and coach employees Supports plant production needs and priorities to achieve plant goals Facilitate, attend and participate in team meetings and programs Comply with all policies and procedures All other duties as assigned or become evident Qualifications This section identifies the minimum job specifications required to perform the job. Knowledge, Skills and Abilities Ability to pass tests required for this position Proficiency in MS Office Excel and basic PC skills Excellent verbal and written communication skills Proven decision making ability Ability to prioritize and multitask Ability to learn all functions of job within a reasonable amount of time Ability to read and understand written instructions and to keep accurate written records Ability to work various hours and shifts Able to work overtime when required Education and Experience High School education or equivalent Attend and complete Better Processing School Achieve and maintain required certifications Nonessential Qualifications Flexibility Materials and Equipment Directly Used: Various Filling, Packaging and Palletizing machines and equipment to include hand tools, compactors and various cleaning machines Office machinery including: computers, printers, fax machines, copiers, telephones, etc. Software including: Microsoft Office including Outlook Industrial power equipment (Forklift, scissor, pallet jack, etc.) Working Conditions Physical Demands: While performing the duties of this job, the employee is frequently required to stand; walk; sit; use hands to finger, handle or feel objects, tools or controls; reach with hands and arms; climb stairs, balance; stoop, kneel or crouch; talk and hear. The employee will lift and/or move up to 60 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment: Working Environment Work is performed throughout the facility. Potential hazards include proximity of moving machinery, chemical exposure, noise, or heavy lifting. The position may require an individual to stand, stoop, move equipment; bend, reach, or lift for prolonged periods of time. PPE includes safety glasses, hearing protection and sanitary footwear. Disclaimer The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. About Us: At Danone North America, you'll work with some of the best-known food and beverage brands in the world like Activia, Silk, Two Good, Oikos, Evian, and Happy Family. You'll be part of one of the largest Certified B Corps in the world , working together to make sure our brands create real benefits for people, communities, and the planet. We have 6,000+ employees across the U.S. and Canada. Come join our movement to bring health through food to as many people as possible. Danone North America doesn't just welcome what makes you unique, we value it. We're proud to be an equal opportunity and affirmative action employer. All hires to our team are based on qualifications, merit and business needs. We recruit, employ, train and promote regardless of race, color, religion, disability, sex, sexual orientation, gender identity, national origin, age, veteran status, genetic characteristic or any other protected status. Faithful to our values of openness and humanism, all of our employees share in the commitment to engage one another with dignity and respect. http://www.dol.gov/ofccp/regs/compliance/posters/pdf/eeopost.pdf https://www.dol.gov/ofccp/regs/compliance/posters/pdf/OFCCP_EEO_Supplement_Final_JRF_QA_508c.pdf #LI-NORAM

Quick Apply

Commercial HVAC Service Technician Level 3

Riddleberger Brothers Mt Crawford, VA

Riddleberger Brothers, Inc. is seeking to hire a talented and growth-minded individual to join our team as a Commercial HVAC Service Technician Level 3. We offer career opportunities that allow you to be part of a team and grow as an individual. We offer you: Competitive pay Comprehensive benefits package Apprenticeship opportunities with a pathway to licensure Growth and development opportunities Scholarship program for our employees' children Discounts at major automotive, computer, and cell phone companies Employee referral incentives Available with certain positions, where necessary/required: Company mobile phone and/or tablet Company vehicle Company uniforms And much more! Our benefits package offers you: Medical, Dental, Vision, and Life Insurances Short-Term and Long-Term Disability Insurances Accidental Death & Dismemberment Insurance Health Care and Dependent Day Care FSA's Health Savings Account (HSA) Employee Assistance Program (EAP) 401(k) Plan with Roth IRA option Pet Insurance Annual Bonus Generous Vacation, Holidays, and Sick Time And much more! About us: We are a full-service plumbing, mechanical, HVAC service, controls, and design-build company. Main office is located at 6127 South Valley Pike, Mount Crawford, VA 22841 Parent Company - Comfort Systems USA (https://comfortsystemsusa.com/) Primary Purpose of this position: Service, maintain and repair most commercial HVAC systems. Specific Job Duties: Follow and adhere to all company safety requirements and processes With the necessary service literature, the Level 3 technician has the technical expertise to service, perform maintenance on, and repair most: Air-cooled water chillers equipped with reciprocating, scroll, or screw compressors Water-cooled DX water chillers equipped with reciprocating, scroll, or screw compressors Electronic controls incorporated with most packaged water chillers Chilled- and hot-water piping and pumping systems equipped with variable speed drives Most gas-fired and electric hot-water heating systems typically found in commercial systems Electronic and computer-controlled digital temperature-control systems typically found in commercial systems Electronic variable-speed drives typically connected to VAV air handlers and pumps Packaged, water-cooled AC units up to 100 tons Water-source heat pumps and associated equipment Computer-room-type units with self-contained humidifiers and controls Gas-fired and electric-heating systems found in commercial equipment up to 100 tons Pneumatic, electronic, and modular DDC control systems generally associated with commercial HVAC systems Air-handling equipment including VAV systems typically found in larger commercial systems Basic maintenance on atmospheric gas fired hot water boilers Perform general maintenance on chilled- and hot-water piping and pumping systems and associated equipment. Has the technical expertise to service, perform maintenance on, and repair most: Direct expansion AC equipment up to 5 tons Most gas-fired and electric heating systems typically found in systems up to 5 tons Low-voltage (24-volt or 1- to 10-volt) temperature-control systems generally associated with HVAC equipment Air-handling equipment and duct systems associated with commercial HVAC equipment Other Requirements: Broad knowledge of larger commercial HVAC equipment Understanding of single and three phase electrical systems Must have the ability to travel to job sites and occasionally have overnight stays Valid driver's license and ability to meet company driver qualification policy Education and Experience Requirements: Must be a high school or trade school graduate or have a GED Must hold a Universal Refrigerant Card and Gas Fitters Card (Type I and Universal) Must have at least five years of commercial experience

Commercial HVAC Service Technician Level 2

Comfort Systems USA Mt Crawford, VA

Riddleberger Brothers, Inc. is seeking to hire a talented and growth-minded individual to join our team as a Commercial HVAC Service Technician Level 2. We offer career opportunities that allow you to be part of a team and grow as an individual. We offer you: Competitive pay Comprehensive benefits package Apprenticeship opportunities with a pathway to licensure Growth and development opportunities Scholarship program for our employees' children Discounts at major automotive, computer, and cell phone companies Employee referral incentives Available with certain positions, where necessary/required: Company mobile phone and/or tablet Company vehicle Company uniforms And much more! Our benefits package offers you: Medical, Dental, Vision, and Life Insurances Short-Term and Long-Term Disability Insurances Accidental Death & Dismemberment Insurance Health Care and Dependent Day Care FSA's Health Savings Account (HSA) Employee Assistance Program (EAP) 401(k) Plan with Roth IRA option Pet Insurance Annual Bonus Generous Vacation, Holidays, and Sick Time And much more! About us: We are a full-service plumbing, mechanical, HVAC service, controls, and design-build company. Main office is located at 6127 South Valley Pike, Mount Crawford, VA 22841 Parent Company - Comfort Systems USA (https://comfortsystemsusa.com/) Primary Purpose of this position: Service, maintain and repair most commercial HVAC systems. Specific Job Duties: Follow and adhere to all company safety requirements and processes With the necessary service literature, has the technical expertise to service, perform maintenance on, and repair most: DX equipment up to 100 tons Packaged, water-cooled AC units up to 100 tons Water-source heat pumps and associated equipment Computer-room-type units with self-contained humidifiers and controls Gas-fired and electric heating systems found in commercial equipment up to 100 tons Pneumatic, electronic, and modular DDC control systems generally associated with commercial HVAC systems Air-handling equipment including VAV systems typically found in larger commercial systems Basic maintenance on atmospheric gas-fired hot-water boilers Performs general maintenance on chilled- and hot-water piping and pumping systems and associated equipment Has the technical expertise to service, perform maintenance on, and repair most: Direct expansion AC equipment up to 5 tons Most gas-fired and electric heating systems typically found in systems up to 5 tons Low voltage (24-volt or 1- to 10-volt) temperature-control systems generally associated with HVAC equipment Air-handling equipment and duct systems associated with the commercial HVAC equipment Other Requirements: Broad knowledge of larger commercial HVAC equipment Understanding of single and three phase electrical systems Must have the ability to travel to job sites and occasionally have overnight stays Valid driver's license and ability to meet company driver qualification policy Education and Experience Requirements: Must be a high school or trade school graduate or have a GED Must hold a Universal Refrigerant Card and Gas Fitters Card (Type I and Universal) Must have at least three years of commercial experience

ASCP / Medical Technologist / Medical Laboratory Technician

MLee Healthcare Staffing and Recruiting, Inc Crawford, CO

Medical Technologist / Medical Laboratory Technician Are you a dedicated Medical Technologist (MT) or Medical Laboratory Technician (MLT) passionate about delivering accurate, high-quality diagnostic testing? Join a supportive healthcare team in Crawford, Colorado, where your work directly improves patient outcomes and contributes to clinical decisions across the care continuum. Your Role: As a Medical Technologist or Medical Laboratory Technician, you will perform various diagnostic laboratory tests using manual techniques and advanced instrumentation. Your responsibilities include preparing and analyzing specimens, conducting quality control procedures, and validating results to ensure accuracy and reliability. You'll collaborate with physicians and clinical teams to support diagnoses and treatment plans, maintain meticulous patient records, and uphold rigorous safety and infection control standards. Your role is essential in ensuring timely and precise laboratory data directly impacting patient care in inpatient and outpatient settings. Qualifications: We are seeking candidates with an associate's or bachelor's degree in Medical Laboratory Science or related fields. Certification as a Medical Technologist (MT) or Medical Laboratory Technician (MLT) through ASCP, AMT, or an equivalent national accrediting agency is required. Ideal candidates bring strong attention to detail, critical thinking, and a proactive approach to laboratory safety and quality standards. Previous experience in a clinical lab setting is preferred, though new graduates with relevant training are welcome to apply. The ability to work both independently and collaboratively is essential. Benefits we offer: We offer a competitive compensation package that reflects your experience and expertise. Our benefits include medical, dental, and vision insurance, paid time off, continuing education support, retirement savings plans, and certification renewal assistance. Working in our laboratory means being part of a tight-knit team that values accuracy, collaboration, and professionalism. You'll have access to modern diagnostic tools in a well-respected community hospital setting, with ongoing opportunities for growth and development. Crawford, Colorado Nestled in the heart of the Rocky Mountains, Crawford offers a spectacular natural setting with year-round access to outdoor activities, including skiing, hiking, biking, and fly fishing. The town is known for its small-town charm, vibrant arts community, and welcoming atmosphere. Home to Western Colorado University, Crawford combines educational and cultural offerings with a peaceful mountain lifestyle. With a relatively low cost of living and a strong sense of community, Crawford is ideal for professionals seeking a balance between career fulfillment and outdoor adventure. If you're ready to make a meaningful impact in the laboratory field while enjoying the lifestyle and natural beauty of the Colorado Rockies, apply today. Become part of a professional and purpose-driven team in Crawford, Colorado-where your work truly matters.

HVAC - Service Technician

Jordan Air Inc Crawford, GA

Overview At Jordan Air , we're looking for a HVAC - Service Technician - Maintenance to join our rapidly growing team. Step into an environment built on transparency and collaboration, with a hands-on management team that supports and challenges you to grow. You'll have access to the tools, regular training, and resources you need to excel. We offer clear paths for advancement, a collaborative culture, and a team that recognizes and rewards hard work. Join Jordan Air and be part of a company that supports your growth while helping you make a difference for our customers every day. Your skills are essential to our success, and we're here to help you achieve your career goals. What You'll Do: Inspect and troubleshoot HVAC systems to identify issues and determine necessary repairs. Perform routine maintenance tasks such as cleaning, lubricating, and replacing parts as needed. Test HVAC system performance and efficiency using specialized tools and equipment. Install, repair, or replace defective parts or components of HVAC systems Identify and recommend upgrades or improvements to enhance system performance and energy efficiency. Keep accurate records of maintenance and repair work performed on HVAC systems. Comply with all safety regulations and guidelines while working on HVAC systems. What You Need: 1 year of residential HVAC service experience minimum. Basic knowledge of the HVAC codes and safety procedures. Experience managing a fleet vehicle and product inventory. Sales and Customer Service Experience required. Must pass motor vehicle & background check and drug screen. Superb customer service skills, honest, dependable, and reliable Physical dexterity. What We Offer: Birthday Pay Paid Holidays Comprehensive Benefits - Medical, prescription, dental, and vision plans to keep you and your family healthy. Security & Growth - Disability and term life insurance, plus matching 401(k) benefits. Paid Time Off - Recharge with generous PTO and paid holidays.

Best Match

Electrical - Service Technician

Jordan Air Inc Crawford, GA

Overview At Jordan Air , we're looking for a Electrical - Service Technician to join our rapidly growing team. Step into an environment built on transparency and collaboration, with a hands-on management team that supports and challenges you to grow. You'll have access to the tools, regular training, and resources you need to excel. We offer clear paths for advancement, a collaborative culture, and a team that recognizes and rewards hard work. Join Jordan Air and be part of a company that supports your growth while helping you make a difference for our customers every day. Your skills are essential to our success, and we're here to help you achieve your career goals. What You'll Do: Diagnose and repair residential electrical systems and components. Conduct inspections and troubleshoot electrical malfunctions. Provide clear communication and education to homeowners on electrical solutions. Maintain accurate job documentation and uphold safety standards. Collaborate with teammates to meet customer expectations and department goals. Ensure all work is completed to code and company standards. What You Need: Minimum of one year of residential electrical experience. Valid electrical certification or license preferred. Strong technical, diagnostic, and problem-solving skills. Excellent customer service and communication abilities. Ability to lift up to 50 lbs. and work in confined spaces. Ability to pass a background check and drug screen. Valid driver's license and clean driving record. What We Offer: Weekly pay | UNCAPPED earning potential! Year-round work Fully stocked company vehicle, gas card, tablet, and uniform Robust benefits package - health, dental, vision insurance, 401k match, IRA, and more Get your birthday off + get paid for that day! Paid Holidays + PTO accrual from day one! Parental Leave Paid Training Employee Referral Bonus Career growth opportunities

Dynamic Environment

Electrician & Instrument Technician

Drax Co Crawford, MS

Electrician & Instrument Technician Full-time, Permanent On-site Location: Aliceville, AL Join us in making a meaningful impact! We produce dispatchable, renewable energy, providing stable power in an uncertain world. With a rich heritage, we aim to lead globally in sustainable biomass and carbon removal. As part of our dedicated team of innovators and business advocates, you’ll contribute to a zero-carbon, lower-cost energy future for generations to come. Your Role: As an Electrician & Instrument Technician, you will play a crucial role in maintaining electrical and instrumentation equipment at our production facility. Your responsibilities will include ensuring the efficient and reliable operation of our equipment. Key Responsibilities: Inspect, test, adjust, calibrate, and repair electrical, electronic, mechanical, and pneumatic instruments and systems. Monitor meters, indicators, and gauges to identify abnormal fluctuations. Maintain a solid understanding of operations software and hardware. Conduct preventative maintenance inspections on all control instrumentation. Troubleshoot and resolve electrical, hydraulic, pneumatic, and mechanical issues. Complete work orders, record time, and manage equipment history. Identify and diagnose existing or potential electrical equipment problems. Perform cleaning, lubrication, calibration, and adjustments as needed. Install and initiate electrical equipment into service. Maintain cleanliness and safety within your designated work area. Utilize multi-craft skills to assist with additional maintenance tasks as required. Who You Are: High school diploma or equivalent; technical degree preferred. 5+ years of industrial maintenance experience. Able to work effectively in team environments or independently with minimal supervision. Experience maximizing equipment efficiency and reducing downtime. Proficient in Computerized Maintenance Management Systems (CMMS) and experienced with Programmable Logic Controllers, Servo, and Frequency Drives. Exhibit a professional attitude and the ability to collaborate well with others. Promote a safe working environment by adhering to safety protocols. Willing to work various shifts, including weekends, nights, and holidays. Benefits of Joining Drax: Competitive hourly wage with opportunities for advancement. Robust benefits starting from day one, including a 401K matching plan. A supportive and collaborative team environment focused on continuous growth. An incentive program rewarding overall company performance, safety, and goals achievement. At Drax, we are passionate about making a tangible impact on the climate challenge we face. Our team members have the opportunity to align their personal purpose with their career goals. Together, let's shape a sustainable future for generations to come. Together, we make it happen. We are committed to creating an inclusive environment where every employee feels valued. Our actions promote better representation in our communities, foster inclusivity, and establish fair processes, ensuring that all colleagues can share their unique perspectives and talents. How to Apply: If you believe this role is the right fit for you, click the 'apply now' button and start your journey with Drax. To learn more about our company, visit our LinkedIn page for the latest updates.

High salary

Diesel Technician

Kingmor Supply Inc Mt Crawford, VA

Diesel Technician Department: Service Reports To: Service Manager Overview Our Technician is responsible for performing high-quality maintenance and repairs on International Motors and IC Bus vehicles. This role ensures safety, customer satisfaction, and efficient operations by following established repair procedures and maintaining a clean and organized workspace. Benefits Health Insurance 401(k) Retirement Plan Paid Time Off (PTO) Competitive Wages Key Responsibilities Prepare for service events by reviewing repair orders, gathering necessary information, securing tools, and ensuring timely access to required parts. Perform maintenance and repairs accurately and safely by following established standards-conducting inspections, sourcing additional information or parts, managing deviations, and returning unused or core parts. Document work thoroughly by clearly describing completed repairs in the repair order, clocking off appropriately, completing handovers when needed, and coordinating the next job to maintain workflow. Apply technical expertise in troubleshooting, repair methods, vehicle systems, and proper tool usage to service International Truck and IC Bus products. Maintain up-to-date product knowledge of International and IC Bus offerings, applying this to align customer solutions with the company's value proposition. Promote safety and compliance by coaching on best practices, ensuring equipment is maintained, and following all health and safety policies and regulations. Mentor coworkers and apprentices through hands-on coaching, knowledge sharing, and guidance to encourage skill growth and team success. Communicate effectively with team members, leadership, and customers to promote understanding, build trust, and encourage collaboration. Deliver exceptional customer service by maintaining strong relationships, understanding needs, and providing professional, timely support. Take ownership of challenges and opportunities by addressing issues promptly, finding practical solutions, and continually seeking process improvements. General Knowledge and Skills You Will Need Maintain up-to-date knowledge of International and IC Bus products and services, applying this understanding to daily tasks and aligning customer solutions with the company's overall value proposition. Apply knowledge of International's repair and maintenance procedures , including troubleshooting techniques, technical vehicle systems, tools, and documentation, to effectively service and repair International Truck and IC Bus products. Communicate clearly and respectfully with team members, leadership, and customers to promote understanding, build trust, and encourage open dialogue. Motivate and encourage team members to strive for excellence by fostering confidence, resilience, and a shared commitment to team goals in a supportive and success-oriented environment. Effectively plan and organize daily tasks by setting clear priorities and using available resources to meet goals that support overall team and organizational success. Identify and solve routine issues by developing practical, cost-effective, and customer-friendly solutions that align with service expectations. Uphold and promote a safe, healthy, and compliant work environment by following and reinforcing safety policies, procedures, and regulations. Utilize software systems and digital tools effectively to perform job-related tasks, streamline workflows, and support accurate, efficient service delivery. Desired Education and Experience Medium or heavy-duty technician, equivalent experience or qualification Applicable certifications related to industry, products, and/or safety Currently maintains or can obtain a Commercial Driver's License (CDL) International Master Certified This is not necessarily a list of all the duties, responsibilities and requirements associated with this position. While the accountabilities noted herein are intended to be an accurate reflection of the current job, the dealership reserves the right to revise the functions and duties as circumstances dictate. We are an Equal Opportunity Employer.

Best Match

Entry-Level Indoor Air Quality Technician

Riddleberger Brothers Mt Crawford, VA

Riddleberger Brothers, Inc. is seeking to hire a driven and growth-minded individual to join our team as a entry-level Indoor Air Quality Technician We offer career opportunities that allow you to be part of a team and grow as an individual. We offer you: Competitive pay Comprehensive benefits package Apprenticeship opportunities with a pathway to licensure Growth and development opportunities Scholarship program for our employees' children Discounts at major automotive, computer, and cell phone companies Employee referral incentives Available with certain positions, where necessary/required: Company mobile phone and/or tablet Company vehicle Company uniforms And much more! Our benefits package offers you: Medical, Dental, Vision, and Life Insurances Short-Term and Long-Term Disability Insurances Accidental Death & Dismemberment Insurance Health Care and Dependent Day Care FSA's Health Savings Account (HSA) Employee Assistance Program (EAP) 401(k) Plan with Roth IRA option Pet Insurance Annual Bonus Generous Vacation, Holidays, and Sick Time And much more! About us: We are a full-service plumbing, mechanical, HVAC service, controls, and design-build company. Main office is located at 6127 South Valley Pike, Mount Crawford, VA 22841 Parent Company - Comfort Systems USA (https://comfortsystemsusa.com/) Primary Purpose: Remediation of commercial HVAC systems to include the cleaning of air ducts, AHU's, coils, and air duct relining. Specific Job Duties: Follow and adhere to all company safety requirements and processes Set up equipment required for job Replace air filters Clean condenser and evaporator coils, fans, and duct work Clean and maintain equipment daily, address issues as necessary Other Requirements: Ability to work on a team and interact with people Understanding of single and three phase electrical systems Strong organization and time management skills Strong communication skills, verbal and written Demonstrate honesty and integrity at all times Flexibility to adjust to change, effectively work under pressure and meet deadlines Consistently display a positive and cooperative attitude and represent the company in a professional manner Punctual and regular attendance Ability to travel to job sites and occasionally have overnight stays Valid driver's license and ability to meet company driver qualification policy Education and Experience Requirements: Must be a high school or trade school graduate or have a GED Ability to complete Ventilation Maintenance Technician online course and pass test Physical Requirements: Must be able to work outside in all weather conditions Ability to work at heights Ability to pass respirator fit test Must be able to work within confined spaces Must be able to adjust focus for reading screens, monitors, and controls and have color vision Must be able to climb and work on ladders, scaffolding, and stairs Must be able to stand for long periods of time as well as stoop, kneel, crouch, and crawl in order to work in tight spaces Have a lifting capacity of 40 pounds Must be able to use hands to reach, grasp, and manipulate objects

Auto Glass Installation Technician Trainee

Safelite Mt Crawford, VA

Does this position interest you? You should apply even if you dont match every single requirement! We're known as an auto glass company. That's the focus of what we do. But beyond the glass, we're so much more. We'll help you build a fulfilling career and encourage you to have a life. Let us be the best place you'll ever work. Does this position interest you? You should apply even if you dont match every single requirement! We're known as an auto glass company. That's the focus of what we do. But beyond the glass, we're so much more. We'll help you build a fulfilling career and encourage you to have a life. Let us be the best place you'll ever work. A Brief Overview A Technician Trainee will be trained and educated to become a proficient auto glass technician. Upon completing our training program, the trainee will receive the Safelite SafeTech certification and will possess fundamental skills necessary for performing unsupervised glass repair, replacement and recalibrations. The trainee is expected to embody the Safelite Spirit with a can-do attitude, caring heart and service mindset while striving to bring unexpected happiness to customers by completing jobs timely and with the highest quality standards. What you will do Be paid to learn and apprentice the Safelite way, through hands-on and classroom training, including: Observing and assisting in installing and repairing auto glass Recalibrating automotive safety systems, including trouble-shooting and completing diagnostic testing Providing additional services & products Study and pass testing to become a Safelite-certified Technician showing proficiency in installations, embracing a positive attitude and following taught techniques. Safely operate company and customer vehicles, company-issued tools and chemicals utilized throughout the workday. Performs other duties as assigned Complies with all policies and standards What youll get: Competitive weekly pay starting at $20.25/hour, increasing to $24.00/hour after training and certification. Earn $5/set of wiper blades when added for customer safety. A benefits package valued at more than $10k*. Includes 401(k) plan with company matching, medical plans, paid time off, holidays & volunteer days. Program to buy additional PTO or sell unused time up to 16 hours. Up to $5,250 annually in tuition reimbursement. Paid training and all the tools and resources you'll need to be successful. View all our health, wealth, and life offerings at www.safelitebenefits.com. Education Qualifications High School Diploma GED/Equivalent Preferred Valid state-issued drivers license any other license(s) (as required by federal, state and local laws) to operate a company vehicle. Required Experience Qualifications Must be 18 years of age or older Required Skills and Abilities Ability to regularly lift and carry up to 35 pounds and occasionally lift and carry up to 50 pounds. Ability to stand for extended periods, work in tight spaces, bend and twist body Ability to use a variety of hand tools and power tools safely and effectively Ability to operate a motor vehicle in accordance with all federal, state and local laws and agreement to be monitored via in-cab vehicle safety camera / video surveillance technology Maintains professionalism and passion for providing outstanding customer service and exceeding customer expectations Ability to safely work outside (in a wide variety of weather conditions and extreme temperatures) for extended periods Ability to work with chemicals (including but not limited to flammable chemicals), as applicable per the Safelite Way of Fitting Ability to work scheduled days, with flexibility on start and end times to accommodate customers needs Proficiency in using computerized diagnostic tools to complete recalibrations and trouble-shoot issues Problem-solving and ability to trouble-shoot issues, independently and collaboratively Ability to read, write and interpret the English language and technical directions Ability to communicate orally (via phone) and written (via computer or other electronic means) Ability to maintain a professional appearance, adhering to Company dress code and PPE policies Willingness and ability to maintain stable performance under professional or personal pressure and/or opposition (e.g., time pressure and productivity measures). This job description in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This job description does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. #LI-RM1 This job description in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This job description does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. This position description is not all inclusive for every aspect of this role. Reasonable accommodations will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not, and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the jobs essential duties because of an ADA disability. Other qualifications may be required to ensure employment eligibility in accordance with local laws, regulations and with Safelite Group, Inc. policies and practices. -- Internal Associates: Already a member of the Safelite team? Apply through your Workday account by searching "Find Open Jobs". Diversity: Safelite welcomes everyone. We value our diverse workforce and suppliers, and were proud to be an equal opportunity employer. Learn more at Careers http://safelite.com/Careers Benefit amounts are estimates only. Actual values will depend on benefit elections during enrollment. This position description is not all inclusive for every aspect of this role. Reasonable accommodation will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the jobs essential duties because of an ADA disability.

Electrical & Instrumentation Technician

Drax Crawford, MS, Lowndes County, MS; Mississippi

Electrical & Instrumentation Tech Full-time, Permanent One-site Location: Aliceville, AL We’re not just talking about making a difference, we’re making it happen. We generate dispatchable, renewable power and create stable energy in an uncertain world. Building on our proud heritage, we have ambition to become the global leader in sustainable biomass and carbon removals. You’ll be joining our teams of practical doers, future thinkers and business champions. We’re enabling a zero carbon, lower cost energy future for all, and working hard to decarbonise the planet for generations to come. So, what will you be doing? As an electrical and instrumentation technician, you will be responsible for maintaining the electrical and instrumentation equipment at the production facility. The individual will be responsible for performing routine maintenance of the facility’s electrical equipment. About the Role: Some of your day-to-day duties include: Inspects, tests, adjusts, calibrates, and repairs electric, electronic, mechanical, and pneumatic instruments and systems used to indicate, and record Inspects meters, indicators, and gauges to detect abnormal fluctuations Maintains a functional knowledge of the operations software and hardware Make preventative maintenance inspections of all control instrumentation Troubleshoots electrical, hydraulic, pneumatic, and mechanical failures and the aptitude to correct those failures Complete work order cycles, performs work, confirm time, and enter equipment history Diagnoses existing or potential trouble with plant electrical equipment Cleans, lubricates, calibrates, and adjusts as conditions indicate Lays out, installs, and places electrical equipment into service Performs housekeeping duties as requested, is responsible for keeping designated area clean and clear of safety hazards Multi-craft skill set is a plus; ability to perform additional maintenance tasks as assigned Who you are? You possess the following: High school diploma or equivalent required Technical degree preferred 5+ years industrial maintenance experience  Ability to adapt to working within a team or lone working environment, with minimal supervision Maintain and adjust equipment to maximize production and minimize downtime Experience with Computerized Maintenance Management Systems (CMMS); Must have experience with Programmable Logic Controllers, Servo and Frequency Drives  Must have a professional attitude and work well with others Promote a safe working environment and follow all workplace and job safety procedures Perform/coordinate good housekeeping in the facility Must be willing to work shift which includes weekends, nights, and holidays  What’s it like to work at Drax? The Perks: A competitive hourly wage, with opportunities to move into different positions as you gain experience. Great benefits starting day 1 and a 401K matching plan to support your personal and family goals. A supportive team environment where you will continuously learn and grow. A 401K matching plan to support your personal and family goals (also starting from day one at Drax!). A company bonus plan which rewards overall Drax performance, safety, and scorecard achievement. We’re committed to making a tangible impact on the climate challenge we all face. Drax is where your individual purpose can work alongside your career drive. We work as part of a team that shares a passion for doing what’s right for the future. With Drax you can shape your career and a future for generations to come. Together, we make it happen. At Drax, we’re committed to fostering an environment where everyone feels valued and respected, regardless of their role. To make this a reality, we actively work to better represent the communities we operate in, foster inclusion, and establish fair processes. Through these actions, we build the trust needed for all colleagues at Drax to contribute their perspectives and talents, no matter their background. Find out more about our approach here. How to apply: Think this role’s for you? Click the ‘apply now’ button to begin your Drax journey. If you want to find out more about Drax, check out our LinkedIn page to see our latest news.

Diesel Technician

Kingmor Supply, Inc. Mount Crawford, VA

Diesel TechnicianDepartment: ServiceReports To: Service ManagerOverviewOur Technician is responsible for performing high-quality maintenance and repairs on International Motors and IC Bus vehicles. This role ensures safety, customer satisfaction, and efficient operations by following established repair procedures and maintaining a clean and organized workspace.BenefitsHealth Insurance401(k) Retirement PlanPaid Time Off (PTO)Competitive WagesKey ResponsibilitiesPrepare for service events by reviewing repair orders, gathering necessary information, securing tools, and ensuring timely access to required parts.Perform maintenance and repairs accurately and safely by following established standards—conducting inspections, sourcing additional information or parts, managing deviations, and returning unused or core parts.Document work thoroughly by clearly describing completed repairs in the repair order, clocking off appropriately, completing handovers when needed, and coordinating the next job to maintain workflow.Apply technical expertise in troubleshooting, repair methods, vehicle systems, and proper tool usage to service International Truck and IC Bus products.Maintain up-to-date product knowledge of International and IC Bus offerings, applying this to align customer solutions with the company’s value proposition.Promote safety and compliance by coaching on best practices, ensuring equipment is maintained, and following all health and safety policies and regulations.Mentor coworkers and apprentices through hands‑on coaching, knowledge sharing, and guidance to encourage skill growth and team success.Communicate effectively with team members, leadership, and customers to promote understanding, build trust, and encourage collaboration.Deliver exceptional customer service by maintaining strong relationships, understanding needs, and providing professional, timely support.Take ownership of challenges and opportunities by addressing issues promptly, finding practical solutions, and continually seeking process improvements.General Knowledge and Skills You Will NeedMaintain up-to-date knowledge of International and IC Bus products and services, applying this understanding to daily tasks and aligning customer solutions with the company’s overall value proposition.Apply knowledge of International’s repair and maintenance procedures , including troubleshooting techniques, technical vehicle systems, tools, and documentation, to effectively service and repair International Truck and IC Bus products.Communicate clearly and respectfully with team members, leadership, and customers to promote understanding, build trust, and encourage open dialogue.Motivate and encourage team members to strive for excellence by fostering confidence, resilience, and a shared commitment to team goals in a supportive and success‑oriented environment.Effectively plan and organize daily tasks by setting clear priorities and using available resources to meet goals that support overall team and organizational success.Identify and solve routine issues by developing practical, cost‑effective, and customer‑friendly solutions that align with service expectations.Uphold and promote a safe, healthy, and compliant work environment by following and reinforcing safety policies, procedures, and regulations.Utilize software systems and digital tools effectively to perform job‑related tasks, streamline workflows, and support accurate, efficient service delivery.Desired Education and ExperienceMedium or heavy‑duty technician, equivalent experience or qualificationApplicable certifications related to industry, products, and/or safetyCurrently maintains or can obtain a Commercial Driver’s License (CDL)International Master CertifiedWe are an Equal Opportunity Employer.#J-18808-Ljbffr