Mechanical Engineering Engineer jobs in Hebron

Mechanical Engineer

The Mechanical Engineer should have a passion for innovation; they will be responsible for maintaining drawings on existing parts and contributing to exciting new product design. The expectation of Ancra Cargo employees is to demonstrate Ancra Cargo’s core values, and to foster a positive culture through interactions with co-workers and guests. Key Responsibilities and Priorities: Safety is our number one priority. This role will promote safety culture through safety toolbox talks, safety committee participation, and positive reinforcement programs. Produce 3D models and drawings Assist in the design and development of new products Perform basic engineering calculations Manage product data in our ERP system Help prototype and validate products Position Consults with: This position will work with Ancra Cargo Operations, Safety, and Engineering personnel at all sites, as well as with some suppliers. Years of Experience and Education Requirements: Bachelor’s degree in mechanical engineering or engineering technology is preferred or 3-5 years’ experience with an associate’s degree. Skills, Specialized Knowledge and Abilities: Knowledge of basic engineering principles & documentation control Experience using CAD software is required. SolidWorks & DraftSight experience is a plus Experience with Microsoft D365 F&O or Dynamics AX 2012 ERP systems is a plus Analytical and problem-solving skills Certification Requirements: Lean or Six Sigma training and certification preferred but not required. Working Conditions/Travel Requirements: Travel is less than 10%. Normal manufacturing environments should be expected. Use of safety glasses, safety shoes, and hearing protection will be required. Disclaimer: Job responsibilities and requirements can change at any time. #J-18808-Ljbffr

Best Match

Mechanical Engineer

The Heico Companies LLC Hebron, KY

Position Summary: The Mechanical Engineer should have a passion for innovation; they will be responsible for maintaining drawings on existing parts and contributing to exciting new product design. The expectation of Ancra Cargo employees is to demonstrate Ancra Cargo’s core values, and to foster a positive culture through interactions with co-workers and guests. Key Responsibilities and Priorities: Safety is our number one priority. This role will promote safety culture through safety toolbox talks, safety committee participation, and positive reinforcement programs. Produce 3D models and drawings Assist in the design and development of new products Perform basic engineering calculations Manage product data in our ERP system Help prototype and validate products Position Consults with: This position will work with Ancra Cargo Operations, Safety, and Engineering personnel at all sites, as well as with some suppliers. Years of Experience and Education Requirements: Bachelor’s degree in mechanical engineering or engineering technology is preferred or 3-5 years’ experience with an associate’s degree. Skills, Specialized Knowledge and Abilities: Knowledge of basic engineering principles & documentation control Experience using CAD software is required. SolidWorks & DraftSight experience is a plus Experience with Microsoft D365 F&O or Dynamics AX 2012 ERP systems is a plus Analytical and problem-solving skills Excellent communication skills Certification Requirements: - Lean or Six Sigma training and certification preferred but not required. Working Conditions/Travel Requirements: Travel is less than 10% Normal manufacturing environments should be expected. Use of safety glasses, safety shoes, and hearing protection will be required. Disclaimer: Job responsibilities and requirements can change at any time. #J-18808-Ljbffr

Dynamic Environment

Mechanical Project Engineer I

BEUMER Group GmbH & Co. KG Hebron, KY

BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description The Project Mechanical Engineer I is a hands-on individual who will prepare specifications, 3D models and drawings for the design, manufacturing, and installation of material handling equipment used in airport baggage handling systems. This position requires good technical, organizational and communication skills. An ideal candidate will have previous education in mechanical designs broadened by experience in the material handling industry. The Engineer will work closely with other Mechanical Engineers, Sales, Project Management, and Procurement. This position will report to the offsite BEUMER Group Office in the Cincinnati/Northern Kentucky International Airport. Job Responsibilities: Provide drafting and design expertise to assist Engineers of the Mechanical Engineering department for the creation of 3D models and production equipment. Survey site conditions versus 3D modeling. Assist Sales in the creation of equipment proposals by providing engineering and design expertise. Evaluate manufacturing feasibility, estimate cost requirements of a variety of material handling systems. Design systems layout and specific components on 2D and 3D AutoCAD equipment and software products. Our product could include steel structures, sheet metal parts, mechanisms and other BEUMER products. Optimize for cost, functionality, and manufacturability. Perform data entry functions to fully document engineering designs in the corporate database. Support existing Engineering processes and assist in the development of new processes. Prepare specifications for equipment purchase. Work with procurement to release equipment for quotation and procurement. Prepare written specifications for training and operation. Work with senior engineers to ensure designs are prepared for manufacturing and assembly. Attend conference calls and on-site meetings with clients as directed by Manager. Qualifications Bachelor's Degree in Mechanical Engineering and related field or equivalent experience. 2 to 4 years of hands-on experience in a manufacturing and project engineering settings. Preferred experience in design of automated machines and material handling capital equipment. Prefer a broad background in various machine technologies (control, electrical). Proficient with Autodesk AutoCAD design programs. Revit experience is a plus. Strong technical writing skills. Ability to analyze and design basic mechanical components. Ability to specify mechanical components. Good knowledge of drafting, dimensioning, tolerancing and manufacturing processes. Excellent time management skills; attention to detail and the ability to learn quickly. Excellent verbal and written communication skills. Professional, positive, and energetic attitude. Able to travel to project sites. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. And by the way, no waiting period, they start when you do! We pay 100% of medical & dental premiums for you AND your eligible dependents. 401k Retirement Plan with a generous match, because we care about your future. Life Insurance is provided free for all employees. Generous amount of paid time off. Long-term disability (yes, we cover that too!). BEUMER is an equal opportunity employer and affords equal opportunity to all applicants and employees for all positions without regard to race, color, religion, gender, national origin, age, disability, veteran status or any other status protected under the law. All your information will be kept confidential according to EEO guidelines. #J-18808-Ljbffr

Mechanical Project Engineer I

BEUMER Group Hebron, KY

Company Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description The Project Mechanical Engineer I is a hands-on individual who will prepare specifications, 3D models and drawings for the design, manufacturing, and installation of material handling equipment used in airport baggage handling systems. This position requires good technical, organizational and communication skills. An ideal candidate will have previous education in mechanical designs broadened by experience in the material handling industry. The Engineer will work closely with other Mechanical Engineers, Sales, Project Management, and Procurement. This position will report to the offsite BEUMER Group Office in the Cincinnati/Northern Kentucky International Airport. Job Responsibilities: Provide drafting and design expertise to assist Engineers of the Mechanical Engineering department for the creation of 3D models and production equipment. Survey site conditions versus 3D modeling. Assist Sales in the creation of equipment proposals by providing engineering and design expertise. Evaluate manufacturing feasibility, estimate cost requirements of a variety of material handling systems. Design systems layout and specific components on 2D and 3D AutoCAD equipment and software products. Our product could include steel structures, sheet metal parts, mechanisms and other BEUMER products. Optimize for cost, functionality, and manufacturability. Perform data entry functions to fully document engineering designs in the corporate database. Support existing Engineering processes and assist in the development of new processes. Prepare specifications for equipment purchase. Work with procurement to release equipment for quotation and procurement. Prepare written specifications for training and operation. Work with senior engineers to ensure designs are prepared for manufacturing and assembly. Attend conference calls and on-site meetings with clients as directed by Manager. Qualifications Bachelor's Degree in Mechanical Engineering and related field or equivalent experience. 2 to 4 years of hands-on experience in a manufacturing and project engineering settings. Preferred experience in design of automated machines and material handling capital equipment. Prefer a broad background in various machine technologies (control, electrical). Proficient with Autodesk AutoCAD design programs. Revit experience is a plus. Strong technical writing skills. Ability to analyze and design basic mechanical components. Ability to specify mechanical components. Good knowledge of drafting, dimensioning, tolerancing and manufacturing processes. Excellent time management skills; attention to detail and the ability to learn quickly. Excellent verbal and written communication skills. Professional, positive, and energetic attitude. Able to travel to project sites. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of the benefits we currently offer full-time employees. And by the way, no waiting period, they start when you do! We pay 100% of medical & dental premiums for you AND your eligible dependents. 401k Retirement Plan with a generous match, because we care about your future. Life Insurance is provided free for all employees. Generous amount of paid time off. Long-term disability (yes, we cover that too!). BEUMER is an equal opportunity employer and affords equal opportunity to all applicants and employees for all positions without regard to race, color, religion, gender, national origin, age, disability, veteran status or any other status protected under the law. All your information will be kept confidential according to EEO guidelines. #J-18808-Ljbffr

Mechanical Project Engineer I

BEUMER Group GmbH & Co. KG Hebron, CT

BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description The Project Mechanical Engineer I is a hands-on individual who will prepare specifications, 3D models and drawings for the design, manufacturing, and installation of material handling equipment used in airport baggage handling systems. This position requires good technical, organizational and communication skills. An ideal candidate will have previous education in mechanical designs broadened by experience in the material handling industry. The Engineer will work closely with other Mechanical Engineers, Sales, Project Management, and Procurement. This position will report to the offsite BEUMER Group Office in the Cincinnati/Northern Kentucky International Airport. Job Responsibilities: Provide drafting and design expertise to assist Engineers of the Mechanical Engineering department for the creation of 3D models and production equipment. Survey site conditions versus 3D modeling. Assist Sales in the creation of equipment proposals by providing engineering and design expertise. Evaluate manufacturing feasibility, estimate cost requirements of a variety of material handling systems. Design systems layout and specific components on 2D and 3D AutoCAD equipment and software products. Our product could include steel structures, sheet metal parts, mechanisms and other BEUMER products. Optimize for cost, functionality, and manufacturability. Perform data entry functions to fully document engineering designs in the corporate database. Support existing Engineering processes and assist in the development of new processes. Prepare specifications for equipment purchase. Work with procurement to release equipment for quotation and procurement. Prepare written specifications for training and operation. Work with senior engineers to ensure designs are prepared for manufacturing and assembly. Attend conference calls and on-site meetings with clients as directed by Manager. Qualifications Bachelor's Degree in Mechanical Engineering and related field or equivalent experience. 2 to 4 years of hands-on experience in a manufacturing and project engineering settings. Preferred experience in design of automated machines and material handling capital equipment. Prefer a broad background in various machine technologies (control, electrical). Proficient with Autodesk AutoCAD design programs. Revit experience is a plus. Strong technical writing skills. Ability to analyze and design basic mechanical components. Ability to specify mechanical components. Good knowledge of drafting, dimensioning, tolerancing and manufacturing processes. Excellent time management skills; attention to detail and the ability to learn quickly. Excellent verbal and written communication skills. Professional, positive, and energetic attitude. Able to travel to project sites. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of the benefits we currently offer full-time employees. And by the way, no waiting period, they start when you do! We pay 100% of medical & dental premiums for you AND your eligible dependents. 401k Retirement Plan with a generous match, because we care about your future. Life Insurance is provided free for all employees. Generous amount of paid time off. Long-term disability (yes, we cover that too!). BEUMER is an equal opportunity employer and affords equal opportunity to all applicants and employees for all positions without regard to race, color, religion, gender, national origin, age, disability, veteran status or any other status protected under the law. All your information will be kept confidential according to EEO guidelines. #J-18808-Ljbffr

Posted 23 hours ago

Validation Engineer

Illinois Tool Works Hebron, IL

Job Description: The Validation Engineer will report to the Sustaining Engineering Manager and will focus on life cycle management for the Medical Division’s existing products. This position will evaluate manufacturing processes and perform validation tests to ensure compliance with company requirements and industry standards. This is a highly strategic role within the ITW Medical business and provides a path for driving meaningful impact within the business. Roles and Responsibilities Develops and executes validation protocols (IQ, OQ, PQ) for equipment, processes, and products. Establishes validation standards and develops performance testing and quality control measures. Develop test procedures that produces validation data. Analyzes and interprets validation data to identify trends, anomalies, and areas for improvement, utilizing statistical techniques. Ensures validation activities comply with regulatory requirements and industry standards. Independently tests, analyzes and solves technical problems. Performs risk assessments and develops mitigation strategies related to validation activities. Works with customers to understand requirements and translates into validation protocols and specifications. Reviews and approves validation deliverables from customers and third-party service providers. Conducts FMEAs and risk analysis as a part of the design control process. Identifies root causes of production problems. Identifies nonconformities of product or process standards and offers recommendations for resolving deviations. Provides technical support to the production team on product specifications and requirements. Works closely with Engineers, Customers, Sales and Manufacturing regarding engineering change management. Qualifications Minimum of 5+ years injection molding in a high-volume manufacturing environment required, preferably in medical-device manufacturing. Bachelor’s degrees in engineering or related field required. Demonstrates comprehensive knowledge of Engineering & Statistical principles and their application in solving complex problems. In-depth knowledge of production processes, parameters, and standards. Possesses an understanding of DFMEA & PFMEA methodology and approach, understands part design layout and GD&T. Excellent leadership, collaboration, and both written and verbal communication skills. Team-oriented individual who thrives in a fast-paced environment. Possess the ability to train, mentor and coach others to solve technical problems. Physical Demands: While performing the duties of this job, the employee is regularly required to stand; walk; and use hands to finger, handle, or feel objects, tools, or controls. The employee is frequently required to reach with hands and arms, stoop, kneel, or crawl; and talk or hear. The employee must frequently lift and move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, depth perception, and the ability to adjust focus. Compensation Information: Pay Transparency This compensation range is provided as a reasonable estimate of the current salary range for this role. Compensation depends on relevant experience and/or education, specific skills, market level, other job-related factors, geographic location, and other factors as applicable by law. As applicable this role will also receive overtime compensation and may be eligible for shift premium compensation. Pay Range: $85,000-110,000 Benefits Benefits for this role can be seen by visiting www.itwemployee.com. In addition, employees can qualify for vacation, sick, and holiday compensation benefits. Vacation - up to 80 hours of time within first year Sick - up to 40 hours of time within first year Floating Holiday - up to 8 hours of time within first year Holiday - 10 paid holidays per year, these holidays are selected by the Division #J-18808-Ljbffr

Posted 23 hours ago

Process Engineer

ZoomEssence, Inc Hebron, KY

This range is provided by ZoomEssence, Inc. Your actual pay will be based on your skills and experience — talk with your recruiter to learn more. Base pay range $80,000.00/yr - $120,000.00/yr Scope: We are seeking a highly skilled and motivated Process Engineer to join our team. Reporting to the Director of Manufacturing Operations, the Process Engineer will be responsible for optimizing, designing, and maintaining production processes to improve efficiency, quality, and food and occupational safety across all operations. Given the continued advancement of our operations and technology, the position also demands extensive collaboration with operations, engineering, R&D and product development in the identification and implementation of equipment and formulation solutions. Success will be clearly measured in operations advancement and productivity. The targeted candidate will be a mechanical or chemical engineer with a passion for hands-on product and process development. Key Responsibilities: Become a process expert in the company’s low temperature technology and all of its operations. Support process improvement initiatives and lead projects that support organizational productivity and cost savings targets. Provide insight and propose opportunities into the optimization of drying processes, operational procedures and formulations for improved throughput and capacity. Monitor processing equipment and adjust process parameters to test, identify and set limits of production capacity. Establish and document procedures for repeatable / reproducible equipment operation and production at peak throughput & efficiency. Investigate process issues and facilitate corrective actions through structured problem-solving. Document and report on downtime, equipment and product issues for development of solutions. Develop data-driven progress reporting methods using both ERP and SCADA systems. Provide technical process solutions, in combination with engineering & formulation scientist, for new formulations as well as for low yielding, slow running, unstable, or quality issue prone products. Maintain process documentation, engineering and architectural drawings and procedures. Create / modify AutoCAD drawings and have an understanding of additive manufacturing. Work with maintenance technician to utilize and optimize maintenance plan and overall efficiency. Support deployment of and training on new products and technologies, equipment or processes. Requirements: BS or MS education in Chemical or Mechanical Engineering or related field. Strong analytical and problem-solving skills. Excellent communication and organization skills. Experience in the Flavor/Food industry is a plus. Experience with control and automation systems. Minimum 3-5 years relevant experience. Seniority level Mid-Senior level Employment type Full-time Job function Management and Manufacturing Industries Food and Beverage Services #J-18808-Ljbffr

Applications Engineer

MetalQuest Unlimited, Inc. Hebron, NE

Applications Engineer Founded in 1996, MetalQuest Unlimited is a precision machining company located in Hebron, Ne. We specialize in tight tolerance machining while utilizing the latest technologies available. We make component pieces for agriculture, oil & gas, hydraulics, and firearms industries to name a few. We are constantly thinking outside of the box for innovative solutions to our manufacturing needs. Often, we find the solution in high tech project implementation, and that's where you come in. About the Job: Our Applications Engineer will have the opportunity to work with brand new technology and robotics. Ultimately, you will implement projects for automated equipment to allow for 24/7 run time. You will be involved in all elements of the projects and ensure the highest quality, be on-time, and efficient. What to expect: Manage project implementation to ensure collaboration between company, customer, and suppliers throughout the process. Collaboration with project staff to create a strategic action plan and troubleshoot manufacturing systems, processes and procedures. Recommend and/or analyze materials, equipment, and practices used in the project. You will be challenged in this role. You will be implementing a sub-assembly project for critical and hard to produce items. Your Talents Include: Problem-solving skills and troubleshooting abilities. Able to switch gears quickly to coordinate and prioritize numerous details. Excellent communication skills. You like to collaborate to move projects forward. You enjoy the challenge, because with it, comes growth. Benefits: Working with amazing people Paid Time Off Sick Leave Holiday Pay Health Insurance Dental Insurance Vision Insurance Retirement #J-18808-Ljbffr

Posted 23 hours ago

Application Engineer

Sandvik Hebron, KY

Sandvik SMS Logistics in Hebron, KY is looking for a Application Engineer (77-90K annually, based on experience) At Sandvik, we approach the world around us with an open mind. No matter position or mindset. That’s how we learn, adapt and change for the future. Put into practice it means that initiatives, innovation and continuous improvements are day-to-day realities. As well as challenging ourselves, and the current way we work. Sandvik Machining Solutions is Sandvik's largest and most profitable business area, with more than 19,000 employees worldwide. We are the leading supplier in the global cutting tool industry and our brand portfolio holds some of the strongest brands in the market. SMS Logistics ensures that any product, ordered anywhere in the world, arrives at our customers in time, in perfect condition, with the lowest possible impact on the environment and in compliance with all international laws and regulations – at the lowest possible cost for Sandvik. At the Distribution Center in Hebron Kentucky, we distribute products within the North, South and Central America Regions. Mission As an Application Engineer, you will support the planning, design, maintenance and installation of the Warehouse Management System and the related distribution center applications, using sophisticated software tools, utilizing knowledge of application engineering and programming, as well as general knowledge of the SMS Logistics business processes and best practices. Further, you will provide onsite technical support to end-users for the WMS applications by responding directly to user’s requests for support. In this position, you report directly to the DC IT Manager. Responsibilities Analyze errors and/or development needs and make recommendations or specifications for improvements to prevent these errors in either internal or external systems; Manage, maintain and assist the development and improvement of the Warehouse Management system to support the SMS Logistics organization and business strategy; Update and maintain documentation and work instructions for the Warehouse Management System; Provide guidance and training as needed to facilitate identified process improvements, including but not limited to advanced data gathering and analysis and problem solving; Support the continued development of SMS Logistics Business Data Platform; Manage, maintain, and continuously develop and improve the distribution center applications infrastructure to support the current needs, as well as future demands of the SMS Logistics organization and business strategy; Regular contact, collaboration and escalation with global Warehouse Management Application Management team as well as external suppliers/vendors as needed to support the SMS Logistics organization and business strategy; Support ongoing activities for key projects within SMS Logistics by conducting tests, analyzing and correcting errors where applicable, reporting results back to various project teams. Your Profile Entry level diploma/degree holders in related fields are welcomed. Experience with Warehouse Management Applications and architecture is a plus; particular in Blue Yonder WMS. You have experience with Oracle RDBMS and excellent organization, communication, and presentation skills. You also must be proficient with Microsoft Windows Client Operating Systems (Win 10, Win11), as well as Microsoft Office 365 Suite of applications. You’re a flexible, self-motivated and pro-active person with excellent English skills both written and verbal. At Sandvik, we strongly believe that diversity of experience, perspective and background will lead to a better environment for our employees, our business and, thereby, our customers. Sandvik offers a comprehensive total compensation package including a competitive benefits package of health, dental and disability insurance, and a 401(k)-retirement savings plan. In addition, we provide opportunities for professional competence development and training, as well as opportunities for career advancement. Sandvik is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Any applicant who, because of a disability, needs accommodation or assistance in completing an application or at any time during the application process should contact Human Resources at [email protected]. Sandvik also provides reasonable accommodations to employees with disabilities consistent with its obligations under the law. #J-18808-Ljbffr

Regional Quality Engineer

Zeiss Group in Hebron, KY

Regional Quality Engineer (Finance) NAME OF THE PETITIONER: Carl Zeiss Vision Inc. JOB TITLE: Regional Quality Engineer WORKSITE ADDRESS: 1040 Worldwide Blvd., Hebron, KY 41048 ANNUAL SALARY: $104,978.00 NUMBER OF HOURS/WEEK: 40 Hours per week REMOTE/TELECOMMUTING POSITION: No . About Us: How many companies can say they've been in business for over 177 years?! Here at ZEISS, we certainly can! As the pioneers of science, ZEISS handles the everchanging environments in a fast-paced world, meeting it with cutting edge of technologies and continuous advancements. ZEISS believes that innovation and technology are the key to a sustainable future and solutions for global change. We have a diverse range of portfolios throughout the ZEISS family in segments like, Industrial Quality & Research, Medical Technology, Consumer Markets and Semiconductor Manufacturing Technology. We are a global company with over 42,000 employees and have over 4,000 in the US and Canada alone! Make a difference, come join the team! Location/Region: Hebron Kentucky What's the role? JOB DUTIES: Support validation and qualification of new technologies and processes - Total Quality (TQ), Target Value (TV). Develop smart industry concepts in collaboration with local and Global team. Implement and maintain Production, Planning & Control (PCP). Prepare and implement automated statistical process control charts and report deviations. Analyze/investigate quality issues, ensure corrective actions are taken and report findings are recorded. Use data mining to extract information from data sets and identify correlations and patterns. Organize and transform information into comprehensible structures. Use statistical analysis of data and prepare process control chart, report deviations and predict trends. Use tools and techniques to visualize data in easy- to-understand formats, such as diagrams and graphs. Analyze/investigate quality issues, ensure corrective actions are taken and report findings are recorded. Perform Product/Process audits to ensure product quality is in alignment with specified requirements. Evaluate the customer complaints and Internal scraps to update Process Failure Mode & Effects Analysis (PFMEA). Develop work instruction (WI) as required by Quality Management System (QMS) to support operation. Follow safety standards and reports any safety concerns to leadership. Do you qualify? MINIMUM REQUIREMENTS: Bachelor's degree or foreign equivalent in Industrial Engineering, Quality Assurance, Mechanical Engineering or related field. Requires 4 years of experience in the job offered or related occupation such as Production Eng., Manufacturing Eng., Industrial Eng., Quality Assurance Engineer, Quality Environment and Health Safety Engineer, or other related role. SPECIAL REQUIREMENTS: 2 years of experience utilizing Microsoft Suite; 2 years of Applications Experience with analytic software systems such as Minitab; 2 years of experience in quality assurance environment; 2 years of experience utilizing Quality Assurance measuring and testing equipment. ALTERNATIVE REQUIREMENTS: Master's degree or foreign equivalent in Industrial Engineering, Quality Assurance, Mechanical Engineering or related field. Requires 2 years of experience in the job offered or related occupation such as Production Eng., Manufacturing Eng., Industrial Eng., Quality Assurance Engineer, Quality Environment and Health Safety Engineer, or other related role. SPECIAL REQUIREMENTS: 2 years of experience utilizing Microsoft Suite; 2 years of Applications Experience with analytic software systems such as Minitab; 2 years of experience in quality assurance environment; 2 years of experience utilizing Quality Assurance measuring and testing equipment. LICENSURE / CERTIFICATION: Six Sigma Green Belt This notice is being posted in compliance with the relevant DOL regulations pertaining to the filing of Permanent Alien Labor Certification Applications. Any person may provide documentary evidence bearing on the application to the Certifying Officer of the US DOL holding jurisdiction over the location of the proposed employment to the Department of Labor as follows: U.S. Department of Labor, Employment and Training Administration, Office of Foreign Labor Certification, 200 Constitution Avenue NW, Room N-5311, Washington, DC 20210. This notice is being provided to workers in the place of intended employment by the following means: Posting a clearly visible and unobstructed notice, for at least 10 consecutive business days, in a conspicuous location in the workplace on the bulletin board where the employer's U.S. workers can readily read the posted notice, including but not limited to locations in the immediate vicinity of the wage and hour notices. ____ US worker(s) applied for this position pursuant to this Notice. All applications should be submitted online on the Career page at www.zeiss.com . Your ZEISS Recruiting Team: Debra Ann Rybolt Zeiss provides Equal Employment Opportunity without unlawful regard to an Applicants race, color, religion, creed, sex, gender, marital status, age, national origin or ancestry, physical or mental disability, medical condition, military or veteran status, citizen status, sexual orientation, pregnancy (includes childbirth, breastfeeding or related medical condition), genetic predisposition, carrier status, gender expression or identity, including transgender identity, or any other class or characteristic protected by federal, state, or local law of the employee (or the people with whom the employee associates, including relatives and friends). #J-18808-Ljbffr

Controls Engineer Service

HAHN Group GmbH Hebron, KY

What is it like working for Hahn Automation? Our teams collaborate cross-functionally solving practical problems with no standard solution resulting in innovative outcomes. We thrive on innovation and thinking outside the box, every project brings new technologies and lessons learned. The work provides diverse experiences that strengthen and challenge creativity, assertiveness, quick thinking, and a general love for learning. Responsibilities of the Controls Engineer: Create and read logic and flow diagrams for program design, commission industrial fieldbus networks: Profibus, Profinet, EthernetIP, and commission 3rd party devices Program multi-axis robotic systems from Kuka, Fanuc and ABB Program and debug Cognex vision systems Review initial electrical schematics and update electrical schematics for as-built changes Perform I/O Check for equipment Perform limited electrical, pneumatic and mechanical changes to equipment Requirements Required Knowledge of Controls Engineer: Experience in PLC logic and programming with any of the following programmable logic controllers: Siemens S7, Allen Bradley RSLogix500 and RSLogix5000. Experience with HMI software; WinCC flex, PanelBuilder, RSView / RSView 32 Strong personal and interpersonal skills are essential Ability to partner effectively with peers, effective communication skills, strong business acumen and sound judgment Ability to deal with and manage difficult situations Must be flexible enough to travel and work overtime as required to support the customer when needed Must be quick learner as each project is unique and requires adaptation from previous experience Required Education of Controls Engineer: Bachelor’s degree in Mechanical, Electrical, or Computer Engineering Minimum of 3 years applied engineering experience is required Employees must have an active passport at all times during their employment Selected controls engineer candidate will be required to pass a pre-employment drug screen and criminal background check. Benefits 401(k) 401(k) matching Dental insurance Employee assistance program Health insurance Health savings account Life insurance Paid time off Vision insurance Job location USA, Hebron, KY General information The HAHN Automation Group is the global solution partner for factory automation. The company stands for industry-specific know-how, an extensive project portfolio, and a global organization with a focus on providing service all from a single source. From manual stations to semi-automated cells and full production lines, 1,800 employees across 22 locations worldwide work on custom solutions. In addition, the digital product portfolio helps manufacturers gain a competitive edge by increasing efficiency and paving the way to a smart factory. Customers in the Automotive, Consumer Goods, Electronics, and MedTech industries have benefited from our expertise for more than 30 years of providing experience and international innovation. #J-18808-Ljbffr

Regional Quality Engineer

Davita Inc. Hebron, KY

Carl Zeiss Vision Inc. is seeking a Regional Quality Engineer in Hebron, KY. 40 hours/week. Duties: Support validation and qualification of new technologies and processes - Total Quality (TQ), Target Value (TV). Develop smart industry concepts in collaboration with local and Global team. Implement and maintain Production, Planning & Control (PCP). Prepare and implement automated statistical process control charts and report deviations. Analyze/investigate quality issues, ensure corrective actions are taken and report findings are recorded. Use data mining to extract information from data sets and identify correlations and patterns. Organize and transform information into comprehensible structures. Use statistical analysis of data and prepare process control chart, report deviations and predict trends. Use tools and techniques to visualize data in easy- to-understand formats, such as diagrams and graphs. Analyze/investigate quality issues, ensure corrective actions are taken and report findings are recorded. Perform Product/Process audits to ensure product quality is in alignment with specified requirements. Evaluate the customer complaints and Internal scraps to update Process Failure Mode & Effects Analysis (PFMEA). Develop work instruction (WI) as required by Quality Management System (QMS) to support operation. Follow safety standards and reports any safety concerns to leadership. MINIMUM REQUIREMENTS: Bachelor's degree or foreign equivalent in Industrial Engineering, Quality Assurance, Mechanical Engineering or related field. Requires 4 years of experience in the job offered or related occupation such as Production Eng., Manufacturing Eng., Industrial Eng., Quality Assurance Engineer, Quality Environment and Health Safety Engineer, or other related role. 2 years of experience utilizing Microsoft Suite; 2 years of Applications Experience with analytic software systems such as Minitab; 2 years of experience in quality assurance environment; 2 years of experience utilizing Quality Assurance measuring and testing equipment. ALTERNATIVE REQUIREMENTS: Master's degree or foreign equivalent in Industrial Engineering, Quality Assurance, Mechanical Engineering or related field. Requires 2 years of experience in the job offered or related occupation such as Production Eng., Manufacturing Eng., Industrial Eng., Quality Assurance Engineer, Quality Environment and Health Safety Engineer, or other related role. 2 years of experience utilizing Microsoft Suite; 2 years of Applications Experience with analytic software systems such as Minitab; 2 years of experience in quality assurance environment; 2 years of experience utilizing Quality Assurance measuring and testing equipment. LICENSURE / CERTIFICATION: Six Sigma Green Belt All applications should be submitted online on the Career page at www.zeiss.com. Your ZEISS Recruiting Team: Debra Ann Rybolt Zeiss provides Equal Employment Opportunity without unlawful regard to an Applicants race, color, religion, creed, sex, gender, marital status, age, national origin or ancestry, physical or mental disability, medical condition, military or veteran status, citizen status, sexual orientation, pregnancy (includes childbirth, breastfeeding or related medical condition), genetic predisposition, carrier status, gender expression or identity, including transgender identity, or any other class or characteristic protected by federal, state, or local law of the employee (or the people with whom the employee associates, including relatives and friends). #J-18808-Ljbffr

Regional Quality Engineer

Camp Lohikan in the Pocono Mountains Hebron, KY

About Us: How many companies can say they've been in business for over 177 years?! Here at ZEISS, we certainly can! As the pioneers of science, ZEISS handles the everchanging environments in a fast-paced world, meeting it with cutting edge of technologies and continuous advancements. ZEISS believes that innovation and technology are the key to a sustainable future and solutions for global change. We have a diverse range of portfolios throughout the ZEISS family in segments like, Industrial Quality & Research, Medical Technology, Consumer Markets and Semiconductor Manufacturing Technology. We are a global company with over 42,000 employees and have over 4,000 in the US and Canada alone! Make a difference, come join the team! Location/Region: Hebron Kentucky What's the role? Carl Zeiss Vision Inc. is seeking a Regional Quality Engineer in Hebron, KY. 40 hours/week. Duties: Support validation and qualification of new technologies and processes - Total Quality (TQ), Target Value (TV). Develop smart industry concepts in collaboration with local and Global team. Implement and maintain Production, Planning & Control (PCP). Prepare and implement automated statistical process control charts and report deviations. Analyze/investigate quality issues, ensure corrective actions are taken and report findings are recorded. Use data mining to extract information from data sets and identify correlations and patterns. Organize and transform information into comprehensible structures. Use statistical analysis of data and prepare process control chart, report deviations and predict trends. Use tools and techniques to visualize data in easy- to-understand formats, such as diagrams and graphs. Analyze/investigate quality issues, ensure corrective actions are taken and report findings are recorded. Perform Product/Process audits to ensure product quality is in alignment with specified requirements. Evaluate the customer complaints and Internal scraps to update Process Failure Mode & Effects Analysis (PFMEA). Develop work instruction (WI) as required by Quality Management System (QMS) to support operation. Follow safety standards and reports any safety concerns to leadership. Do you qualify? MINIMUM REQUIREMENTS: Bachelor's degree or foreign equivalent in Industrial Engineering, Quality Assurance, Mechanical Engineering or related field. Requires 4 years of experience in the job offered or related occupation such as Production Eng., Manufacturing Eng., Industrial Eng., Quality Assurance Engineer, Quality Environment and Health Safety Engineer, or other related role. 2 years of experience utilizing Microsoft Suite; 2 years of Applications Experience with analytic software systems such as Minitab; 2 years of experience in quality assurance environment; 2 years of experience utilizing Quality Assurance measuring and testing equipment. ALTERNATIVE REQUIREMENTS: Master's degree or foreign equivalent in Industrial Engineering, Quality Assurance, Mechanical Engineering or related field. Requires 2 years of experience in the job offered or related occupation such as Production Eng., Manufacturing Eng., Industrial Eng., Quality Assurance Engineer, Quality Environment and Health Safety Engineer, or other related role. 2 years of experience utilizing Microsoft Suite; 2 years of Applications Experience with analytic software systems such as Minitab; 2 years of experience in quality assurance environment; 2 years of experience utilizing Quality Assurance measuring and testing equipment. LICENSURE / CERTIFICATION: Six Sigma Green Belt All applications should be submitted online on the Career page at www.zeiss.com . We have amazing benefits to support you as an employee at ZEISS! Medical Vision Dental RSP Employee Assistance Program Paid time off including vacation, personal, and sick days The list goes on! ZEISS is an equal opportunity employer. Your ZEISS Recruiting Team: Debra Ann Rybolt Zeiss provides Equal Employment Opportunity without unlawful regard to an Applicants race, color, religion, creed, sex, gender, marital status, age, national origin or ancestry, physical or mental disability, medical condition, military or veteran status, citizen status, sexual orientation, pregnancy (includes childbirth, breastfeeding or related medical condition), genetic predisposition, carrier status, gender expression or identity, including transgender identity, or any other class or characteristic protected by federal, state, or local law of the employee (or the people with whom the employee associates, including relatives and friends). #J-18808-Ljbffr

Composites Software Engineer

Fives Hebron, KY

Join to apply for the Composites Software Engineer role at Fives . Get AI-powered advice on this job and more exclusive features. Position Summary Accountability: Job involves development and support of programming and simulation software products for automated CNC and robotic manufacturing systems. Fives is a global industrial engineering group that designs and supplies robotics, process equipment, and production lines for major industrial sectors including aerospace, automotive, biotech, semiconductor, and energy. Scope and Responsibilities: Design, implement, and test software. Review and generate software specifications. Provide customer support for composites programming products. Maintain product source libraries and build procedures. Work closely with team members and customer representatives to improve system performance. Ensure ISO 9001 & 14001 compliance. Education/Certification: Bachelor of Science in engineering or computer science required. 2+ years of software development experience preferred. Experience: Experience with Visual Studio IDE, C/C++, MS Windows, and OOD required. Experience with C#, XML Schema, DB/SQL, IPC, and Mercurial or GIT preferred. Experience with Visual Basic, 3D CAD, CATIA V5, machine tool post processors, and industrial robot programming is a plus. Strong analytical and mathematical skills required. Proficiency with analytical geometry, vector mathematics, and coordinate transformations is preferred. Skills: Strong analytical and mathematical skills required. Proficiency with analytical geometry, vector mathematics, and coordinate transformations preferred. Experience in GUI/HMI development, MS Visual Studio, Java NetBeans, Java Swing, DB/SQL, and C/C++ and C# is desirable. Benefits: Employer-paid Life, Disability & High-Deductible Health Plans 401(k) and HSA Accounts Low-Cost Dental, Vision, and Medical Plans Voluntary Accident, Critical Illness, Hospital, ID Theft & Supplemental Plans Paid Holidays & Paid Time Off Work-life balance and flexibility Minimal travel required (less than 5%). Additional Details: Seniority level: Entry level Employment type: Full-time Job function: Engineering and Information Technology Industry: Industrial Machinery Manufacturing This job posting is active. #J-18808-Ljbffr

Sr. Controls Engineer IV

TechDigital Group Hebron, KY

Shift: 8am - 5pm Mon-Fri Duration: 3 months with the possibility to extend to 6 months. This Automation Engineer role for Beckman Coulter Diagnostics is responsible for technical contributions focusing on state of the art and innovative automation solutions including equipment development, controls, and design through implementation for global operations. The primary role for this position would include large scale automated equipment related to filling, capping, labeling, inspection, and advanced material handling functionality. In this role, you will have the opportunity to: Partner with our Beckman Automation Engineering team during installation & commissioning of highly automated equipment in our Hebron KY manufacturing facility. Provide technical expertise to our technical operations and validation teams during characterization and validation activities. Provide software & automation technical support in the areas of PLC controls, HMI's, vision systems, servo control and overall equipment automation. Work with contracted equipment suppliers on site and remotely to debug and make software and/or configuration improvements where necessary. Become on-site subject matter expert (SME) for functional setup and operation of commissioned equipment. Provide technical training and guidance to operators when required. The essential requirements of the job include: Allen Bradley, Studio 5000 PLC programming experience Experience with electromechanical systems including AC & DC motor drives, servo motors, HMIs, I/O hardware machine safety. Experience with equipment line debug while providing on-site installation and training as required by project specifications. Must be able to be on-site at our BEC Hebron KY facility for 75% of time during installation, commissioning, and validation support. It would be a plus if you also possess previous experience in: Hands-on experience with a subset of the following software platforms: Cognex InSight, FactoryTalk View SE, AutoCAD. Experience leading and managing a team during debug and commissioning. #J-18808-Ljbffr

Controls Engineer m/f

HAHN Group GmbH Hebron, CT

What is it like working for Hahn Automation? Our teams collaborate cross-functionally solving practical problems with no standard solution resulting in innovative outcomes. We thrive on innovation and thinking outside the box; every project brings new technologies and lessons learned. The work provides diverse experiences that strengthen and challenge creativity, assertiveness, quick thinking, and a general love for learning. Responsibilities of the Controls Engineer: Create and read logic and flow diagrams for program design, commission industrial fieldbus networks: Profibus, Profinet, EthernetIP, and commission 3rd party devices Program multi-axis robotic systems from Kuka, Fanuc and ABB Program and debug Cognex vision systems Review initial electrical schematics and update electrical schematics for as-built changes Perform I/O Check for equipment Perform limited electrical, pneumatic and mechanical changes to equipment Requirements Required Knowledge of Controls Engineer: Experience in PLC logic and programming with any of the following programmable logic controllers: Siemens S7, Allen Bradley RSLogix500 and RSLogix5000 Experience with HMI software; WinCC flex, PanelBuilder, RSView / RSView 32 Strong personal and interpersonal skills are essential Ability to partner effectively with peers, effective communication skills, strong business acumen and sound judgment Ability to deal with and manage difficult situations Must be flexible enough to travel and work overtime as required to support the customer when needed Must be quick learner as each project is unique and requires adaptation from previous experience Required Education of Controls Engineer: Bachelor’s degree in Mechanical, Electrical, or Computer Engineering Minimum of 3 years applied engineering experience is required Employees must have an active passport at all times during their employment Selected controls engineer candidate will be required to pass a pre-employment drug screen and criminal background check. Job location USA, Hebron, US General information The HAHN Automation Group is the global solution partner for factory automation. The company stands for industry-specific know-how, an extensive project portfolio, and a global organization with a focus on providing service all from a single source. From manual stations to semi-automated cells and full production lines, 1,800 employees across 22 locations worldwide work on custom solutions. In addition, the digital product portfolio helps manufacturers gain a competitive edge by increasing efficiency and paving the way to a smart factory. Customers in the Automotive, Consumer Goods, Electronics, and MedTech industries have benefited from our expertise for more than 30 years of providing experience and international innovation. #J-18808-Ljbffr

Operations Industrial Engineer l

International Executive Service Corps Hebron, KY

At DHL, our people are our greatest asset! Everyone’s contribution drives us to be the world's #1 logistics company. Certified as a Great Place to Work and as a Top Employer, we're dedicated to fostering a positive, collaborative, and supportive environment for all. Our commitment and engagement with Our People ensure we continuously build a workplace we're all proud of. Plus, with competitive compensation and exceptional perks, we make sure your personal life shines just as brightly as your career. SUMMARY: The Operations Industrial Engineer l will be responsible for working with Operations and Automation teams for the planning, implementation management, and measurements of DHL processes in existing and new terminals. Permanently identifies inefficiencies and achieves continuous improvement. ESSENTIAL DUTIES AND RESPONSIBILITIES: Primary responsibilities include the following. Focus is on the assigned terminals per Engineer, but can be extended as needed. Provides engineering support for 1-3 distribution centers and operations management Responsible for traditional Industrial Engineering tasks including staff planning models, productivity improvement, work methods and measurement standards, best practice identification, standardized process maintenance and procedure documentation. Performs advanced root cause analysis on field metrics to enhance cost effectiveness in the field. Analyzes reports and data pertaining to operations engineering performance (e.g., service performance, quality, cost per unit, pieces per hour). Identifies and describes process/product/profile deviations per customer/process/terminal on a regular basis Identifies opportunities for Layout-optimization of existing terminals Conducts time-studies, identification and description of process deviations, identification and implementation of best practices EDUCATION AND/OR EXPERIENCE: Bachelor’s Degree in industrial engineering and 0-2 years applicable experience required Experience in automation design and implementation preferred. Demonstrated proficiency in MS Excel, MS PowerPoint, comfort in Visio and/or AutoCAD, comfort in MS Project REQUIRED SKILLS: Change Management – Develops workable implementation plans; Communicates changes effectively Analytical Capability– Synthesizes complex or diverse information; Collects and researches data; Design workflows and procedures Problem Solving – Identifies and resolves business problems in a timely manner Project Management – Develops project plans; Coordinates projects; Manages project team activities Judgment – Exhibits sound and accurate judgment; Supports and explains reasoning for decisions Presentation/Communication Skill – Speaks and writes clearly and persuasively Interpersonal Skills – Easily develops positive relationships across all levels in organization. Can create buy-in and lead effectively in positions without explicit authority. Communication – Ability to successfully communicate via verbal or written method with multiple levels of employees. PHYSICAL DEMANDS: Physical demands are consistent with a warehouse environment where frequently this position will be exposed to cold, hot and changing temperatures; will constantly experience noise at medium level not damaging or loud enough to require protective equipment; will frequently be exposed to dust, dirt and changes in lighting. May be required to push, pull and lift up to 50 lbs. (additional weight may be required with assistance). Frequently walk throughout the warehouse to supervise employees. Flexible to work any shift As a Top Employer and leading logistics company, at DHL eCommerce , we are committed to helping you build a career you’ll love with benefits and incentives that support your personal and professional well-being: Competitive Pay Bonus Programs Retirement Savings - 401k with company match Medical, Dental, Vision, Well-being programs FSA/HSA availability Tuition Reimbursement Paid Time Off including vacation and sick time Company Paid Holidays and Floating Holidays Paid Parental Leave Employee Discount Program Employee Assistance & Work Life Program Short Term and Long-Term Disability Life Insurance Equal Opportunity Employer- Veterans/Disability #J-18808-Ljbffr

SALES ENGINEER (M/F/D)

LOGOMAT automation systems, Inc. Hebron, KY

Join to apply for the SALES ENGINEER (M/F/D) role at LOGOMAT automation systems, Inc. 3 weeks ago Be among the first 25 applicants What We Do LOGOMAT automation systems, Inc. is one of the world leading suppliers of automated smart conveyors for assembly and test lines, mostly in the automotive industry. With three family owned and operated facilities across three continents, LOGOMAT supplies products to well-known international customers. Our innovative products are based on electrically driven guided vehicles with various options and customer interfaces. Data flow, monitoring, and flexible interfaces to customer controls are key features for modern assembly lines. We develop, wire, and service our equipment in-house, seeking motivated and innovative personnel to support our growth and market position. What You Do Do you enjoy meeting customers to solve problems? Are you comfortable being the main contact for projects and building professional relationships at customer facilities? A mechanical and electrical understanding, along with motivation to bring great products to factories across North America, will help you succeed. We are eager to add a dedicated individual to expand our capabilities and global footprint. What We Offer Join a mid-sized, innovative team of young professionals with extensive experience. Our modern facility in Hebron features new machinery and excellent working conditions. We offer growth opportunities, attractive benefits, and an international environment working with Fortune 500 companies, OEMs, Tier 1 suppliers, and integrators. Interested? We look forward to receiving your resume and connecting with you. Application Details LOGOMAT automation systems, Inc. 2595 Arbor Tech Drive Hebron, KY 41048 USA Phone: +1 (859) 283-1759 Email: [email protected] Job Details Seniority level: Entry level Employment type: Full-time Job function: Sales and Business Development Referrals can double your chances of interview success at LOGOMAT. Set job alerts for “Sales Engineer” roles and explore other opportunities such as Account Manager, Regional Sales Manager, and Territory Sales Manager positions in Cincinnati and surrounding regions. #J-18808-Ljbffr

Controls Engineer m/f/d

HAHN Group GmbH Hebron, CT

What is it like working for Hahn Automation? Our teams collaborate cross-functionally solving practical problems with no standard solution resulting in innovative outcomes. We thrive on innovation and thinking outside the box, every project brings new technologies and lessons learned. The work provides diverse experiences that strengthen and challenge creativity, assertiveness, quick thinking, and a general love for learning. Responsibilities of the Controls Engineer: Create and read logic and flow diagrams for program design, commission industrial fieldbus networks: Profibus, Profinet, EthernetIP, and commission 3rd party devices Program multi-axis robotic systems from Kuka, Fanuc and ABB Program and debug Cognex vision systems Review initial electrical schematics and update electrical schematics for as-built changes Perform I/O Check for equipment Perform limited electrical, pneumatic and mechanical changes to equipment Requirements Required Knowledge of Controls Engineer: Experience in PLC logic and programming with any of the following programmable logic controllers: Siemens S7, Allen Bradley RSLogix500 and RSLogix5000 Experience with HMI software; WinCC flex, PanelBuilder, RSView / RSView 32 Strong personal and interpersonal skills are essential Ability to partner effectively with peers, effective communication skills, strong business acumen and sound judgment Ability to deal with and manage difficult situations Must be flexible enough to travel and work overtime as required to support the customer when needed Must be quick learner as each project is unique and requires adaptation from previous experience Required Education of Controls Engineer: Bachelor’s degree in Mechanical, Electrical, or Computer Engineering Minimum of 3 years applied engineering experience is required Employees must have an active passport at all times during their employment Selected controls engineer candidate will be required to pass a pre-employment drug screen and criminal background check. Job location USA, Hebron, US General information The HAHN Automation Group is the global solution partner for factory automation. The company stands for industry-specific know-how, an extensive project portfolio, and a global organization with a focus on providing service all from a single source. From manual stations to semi-automated cells and full production lines, 1,800 employees across 22 locations worldwide work on custom solutions. In addition, the digital product portfolio helps manufacturers gain a competitive edge by increasing efficiency and paving the way to a smart factory. Customers in the Automotive, Consumer Goods, Electronics, and MedTech industries have benefited from our expertise for more than 30 years of providing experience and international innovation. #J-18808-Ljbffr

Controls Engineer

MPW Hebron, OH

Job Description Job Description #INDMPW JOB FUNCTION: 1. The Electrical Systems Engineer is responsible for all electrical aspects of an assigned project. 2. Ability to work on multiple projects simultaneously and communicate team priorities. 3. May be asked to assist with the training and development of team members. 4. Knowledgeable with all aspects of MPW equipment and able to create high-level design concepts based on sales level information. Interact with internal and external customers at all levels. ESSENTIAL FUNCTIONS: CORE RESPONSIBILITIES: Safety 1. Follow all safety rules, regulations and ensure all personnel abide by safety guidelines. Design 2. Will lead and manage projects using industry best practices for, but not limited to: 3. Electrical Power Distribution Systems (480VAC 3Ph to Low Voltage Control Power) 4. Control System Architecture including Safety, Instrumentation, PLC, and network design. 5. Control Panel Component Selection and Layout 6. Panel and System Fabrication Shop Support 7. Validate teams engineering design deliverables against MPW and Industry best practices. Programming 8. Competent in PLC and HMI programming following MPW’s standard programming practices, considering safety at all levels in the program. 9. Program new systems based on developed Control Narratives and P&IDs. 10. Ability to validate programs from others against MPW and Industry best practices. Testing and Quality Control 11. Will develop and maintain MPW testing procedures and quality control standards for complex equipment. 12. Will assist with team oversight to ensure procedures are followed to ensure proper system functionality and achieve the highest level of customer satisfaction. 13 . Test equipment following developed schedules and plans, communicate testing status to all levels within MPW. ADDITIONAL RESPONSIBILITIES: 1. This position handles workforce, equipment, and customer relations in multiple, geographically dispersed locations. 2. Due to the nature of the business as a 24/7 service company, non-traditional availability may be required as a regular part of the job. 3. Travel to field services sites, and customer sites as needed. Up to 60 nights travel required. 4. This position is a member of the MPW Management Team and called upon to facilitate the performance of all of members of MPW. QUALIFICATIONS: 1. Bachelor’s degree in electrical or computer engineering with 1-year minimum in engineering related field 2. Associate degree with 3-years minimum technical experience dealing directly with power distribution, control system design and programming, control system networking. 3. Practical knowledge in Power and Controls design. Experience with Allen Bradley control systems preferred. Factory Talk experience preferred. 4. Practical knowledge of Ethernet I/P Networking 5. Experience with AutoCAD drafting preferred. 6. Familiarity with NEC electrical codes and compliance. #INDMPW