Anesthesia Technician jobs in Reading

Patient care Technician

PURPOSE AND SCOPE:Functions as part of the dialysis health care team in providing safe and effective dialysis therapy for patients under the direct supervision of a licensed nurse in accordance with organization policies, procedures, and training and in compliance with regulations set forth by the corporation, state, and federal agencies. Responsible for the setup and operation of hemodialysis machines. Assist in the maintenance of a safe and clean working environment. Supports the organization commitment to the Quality Enhancement Program (QEP) and CQI Activities, including those related to patient satisfaction and actively participates in process improvement activities that enhance the likelihood that patients will achieve the organization Quality Enhancement Goals (QEP).PRINCIPAL DUTIES AND RESPONSIBILITIES:Patient RelatedEducation:* Assist other health care members in providing patient specific detailed education regarding adequacy measures where appropriate - Online Clearance Monitoring (OLC), Adequacy Monitoring Program (AMP), Urea Kinetic Modeling (UKM), and regarding disease process/access.Treatment:Welcome assigned patients and inquire as to their wellbeing since their last treatment.Evaluate vascular access for patency, perform vascular access cannulation, and perform administration of heparin as delegated or as allowed by state law.Obtain necessary pre and post treatment vital signs and weight and perform vascular access evaluation pre- treatmentInitiate dialysis treatment according to prescribed orders including blood flow (QB) and dialysate flow (QD).Evaluate intradialytic problems and provide intervention as prescribed by physician order or as directed.Monitor patients' response to dialysis therapy.Obtain vital signs prior to reinfusion; perform all relevant functions necessary for the discontinuation of treatment - document.Discontinue dialysis treatment according to established procedures and evaluate patient prior to termination of venous access - standing & sitting blood pressureObtain Hemostasis and apply appropriate dressings.Evaluate the patient prior to discharge.Perform and record Pre and Post dialysis evaluation, weight, and vital signs with initial identificationResponsible for calculating and entry of individual patients' dialysis machine programming for Ultrafiltration (UF) goal; treatment time; and UF modeling as prescribed.Responsible for ensuring appropriate safety alarms are enabled, including Narrow Venous Limits, (NVL) 160.Record accurate and timely information regarding vital signs and treatment parameters onto the Hemodialysis Treatment Sheet with initial identificationResponsible for accurate documentation of information related to patient treatment including completion of Hemodialysis Treatment Sheet and, if applicable, progress notes.Report any significant information and/or change in patient condition directly to the registered nurse or supervisor.Observe patient and conduct machine safety checks according to facility policy. Report any change or unusual findings to the registered nurse or supervisor.Perform and document any intervention for unusual patient status and document patients' response to intervention.Evaluate patients' vascular access during treatment including arterial and venous monitoring pressures, provide appropriate intervention as needed, document and report any unusual findings to the registered nurse or supervisor.Obtain all prescribed laboratory testing and prepare specimens for collection.Ensure that all blood spills are immediately cleaned with appropriate disinfectant according to facility policy.Prepare, organize, and efficiently utilize supplies and equipment to prevent wastage.Monitors patients performing self-care under the supervision of RN.Staff Related* Assists in training of applicable direct patient care staff on appropriate programs under the supervision of a nurse.Education/Communication:Follows all organization business policies, procedures and systems incorporated into training, including compliance with ethical business practicesMaintain environmental integrity and aesthetics - ensure all areas are safe and clean.Clean and disinfect dialysis machine surface, chair, equipment, and surrounding area between treatments according to facility policy.Conduct all tasks necessary for preparation for dialysis treatment and document where appropriate and perform all required pretreatment dialysis machine alarm testing including Pressure Holding (PHT).Initiate Solution Delivery System (SDS) system.RECORD KEEPING:Complete and document ongoing participation in Continuous Quality Improvement (CQI) activities.Enters all treatment data into the designated clinical application in an accurate and timely manner.Review treatment sheets for completeness, ensure nursing signatures are documented, and ensureomitted entries are completed or corrected by appropriate staff.Prepare initial patient chart for admission and compile paperwork for appropriate placement in chart.Prepare/print lab requisitions for prescribed or stat Lab specimens according to laboratory destination.Collect, label, appropriately prepare and store lab samples according required laboratory specifications.Ensure collection of lab specimens by appropriate lab courier.INFECTION CONTROL:Assists in collecting information for infection control audits.Supports staff and patient Adherence to infection control practices.Follows infection control Policies and ProceduresParticipates in and reinforces infection control education of patients and families under the direction of the CM or designee as allowed by state law.TRANSITIONAL CARE UNIT:Follows all newly admitted patients through their first 4 weeks of dialysis and coordinating their transitional dialysis careReinforces all education and care related matters as it relates to the new patient as allowed by state lawLiaisons with appropriate FKC staff members to provide the best patient experience including making sure all disciplines are scheduled to see patient according to plan.Assists in assuring patient understanding or home dialysis products, benefits of home and how home dialysis can work for them.Sets and preforms a treatment on all machines used in the transitional care unit.Assist in assuring patient understanding of treatment options including demonstration of the peritoneal dialysis set-up.Assists with coordination of transition to patient's modality choice.Assists with supply ordering and inventory for TCUPHYSICAL DEMANDS AND WORKING CONDITIONS:* The physical demands and work environment characteristics described here are representative of those an employeeencounters while performing the essential functions of this job. Reasonable accommodations may be made to enableindividuals with disabilities to perform the essential functions.* Employees are required to take the Ishihara's Color Blindness test as a condition of employment. Note that: Failing theIshihara Test for Color Blindness does not preclude employment. The Company will consider whether reasonableaccommodations can be made.Day to day work includes desk and personal computer work and interaction with patients, facility staff, and physicians. The position requires travel between assigned facilities and various locations within the community. Travel to regional, Business Unit and Corporate meetings may be required.The work environment is characteristic of a health care facility with air temperature control and moderate noise levels. May be exposed to infectious and contagious diseases/materialsThe position provides direct patient care that regularly involves heavy lifting and moving of patients and assisting with ambulation. Equipment aids and/or coworkers may provide assistance. This position requires frequent, prolonged periods of standing and the employee must be able to bend over. The employee may occasionally be required to push and/or pull equipment, exerting up to 15 pounds of force. The employee may be required to lift and to lower solutions on a frequent basis of up to 30 lbs., and on an occasional lift basis up to 40 lbs., as high as 5 feet. There is a two-person assist program and "material assist" devices for the heavier items.EDUCATION AND LICENSES:High School diploma or G.E.D. required.Must meet Center for Medicaid/Medicare Services (CMS)-approved state and/or national certification requirements within the required state or CMS timeline.All appropriate state licensure, education, and training (if any) required.Demonstrated commitment to organization culture, values, and customer service standardsEXPERIENCE AND REQUIRED SKILLS:Previous patient care experience in a hospital setting or a related facility preferred.Continued employment is dependent on successful completion of the organization dialysis training program and successful completion of CPR certification.Fresenius Medical Care maintains a drug-free workplace in accordance with applicable federal and state laws.

Posted 6 hours ago

High salary

Repair and Tool Technician

Home Depot Reading, CO

Job DescriptionPosition Purpose:Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained. Technicians work in both our stores with Tool Rental Centers and in our repair centers. In a store, technicians will be expected to provide service to store customers in Tool Rental which includes writing customer contracts and invoices for equipment rental and tool repairs, checking to make sure tool is operating properly and demonstrating its proper use (as needed). In addition to supporting customer repair needs, they are also responsible for the day-to-day operation and maintenance of equipment in the tool rental department. In non-store locations, technicians will ensure units are repaired, tested for the quality of the repair and cleaned prior to returning to the store where the repair originated. Technicians must have a thorough knowledge of all tools and must effectively manage the tool inventory by maintaining the tools and repairing them as necessary.

Posted 6 hours ago

Immediate Start

Patient Care Technician - PCT

Fresenius Medical Care Reading, CO

PURPOSE AND SCOPE:Supports FMCNA's mission vision core values and customer service philosophy. Adheres to the FMCNA Compliance Program including following all regulatory and FMS policy requirements.Functions as part of the hemodialysis health care team in providing safe and effective dialysis therapy for patients under the direct supervision of a licensed nurse in accordance with FMCNA policies procedures and training and in compliance with regulations set forth by the corporation state and federal agencies. Responsible for the setup and operation of hemodialysis machines. Assist in the maintenance of a safe and clean working environment. Supports the FMCNA commitment to the Quality Enhancement Program (QEP) and CQI Activities including those related to patient satisfaction and actively participates in process improvement activities that enhance the likelihood that patients will achieve the FMC Quality Enhancement Goals (QEP).DUTIES / ACTIVITIES:CUSTOMER SERVICE:Responsible for driving the FMS culture through values and customer service standards.Accountable for outstanding customer service to all external and internal customers.Develops and maintains effective relationships through effective and timely communication.Takes initiative and action to respond resolve and follow up regarding customer service issues with all customers in a timely manner.PRINCIPAL RESPONSIBILITIES AND DUTIESPATIENT CARE:Assist other health care members in providing patient specific detailed education regarding adequacy measures where appropriate - Online Clearance Monitoring (OLC) Adequacy Monitoring Program (AMP) Urea Kinetic Modeling (UKM) and regarding disease process/access.Welcome assigned patients and inquire as to their well-being since their last treatment. Report any complaints or observations to the nurse supervisor.Evaluate vascular access for patency and report any unusual findings to nurse supervisor.Obtain necessary pre and post treatment vital signs and weight. Report unusual findings to nurse supervisor.Perform vascular access evaluation pre-treatment and report unusual findings to nurse supervisor.Perform vascular access cannulation and report any difficulties in cannulation or unusual findings to nurse supervisor.Perform administration of Heparin as delegated or as allowed by state law.Initiate dialysis treatment according to prescribed orders including blood flow (QB) and dialysate flow (QD).Evaluate intradialytic problems and provide intervention as prescribed by physician order or as directed.Monitor patients' response to dialysis therapy and report any unusual findings to nurse supervisor.Obtain vital signs prior to reinfusion; perform all relevant functions necessary for the discontinuation of treatment - document.Discontinue dialysis treatment according to established proceduresEvaluate patient prior to termination of venous access - standing & sitting blood pressure.Obtain Hemostasis and apply appropriate dressings.Evaluate the patient for prior to discharge and report any unusual findings to nurse supervisor.Perform and record Pre and Post dialysis evaluation weight and vital signs with initial identification.Responsible for calculating and entry of individual patients' dialysis machine programming for Ultrafiltration (UF) goal; treatment time; Sodium (Na) modeling; and UF modeling as prescribed.Responsible for ensuring appropriate safety alarms are enabled including Narrow Venous Limits (NVL) 160.Record accurate and timely information regarding vital signs and treatment parameters onto the Hemodialysis Treatment Sheet with initial identification.Responsible for accurate documentation of information related to patient treatment including completion of Hemodialysis Treatment Sheet and if applicable progress notes.Report any significant information and/or change in patient condition directly to the nurse supervisor.Observe patient and conduct machine safety checks according to facility policy. Report any change or unusual findings to the nurse supervisor.Perform and document any intervention for unusual patient status and document patients' response to intervention.Evaluate patients' vascular access during treatment including arterial and venous monitoring pressures provide appropriate intervention as needed document and report any unusual findings to the nurse supervisor.Obtain all prescribed laboratory testing and prepare specimens for collection.MAINTENANCE/TECHNICAL:Maintain environmental integrity and aesthetics - ensure all areas are safe and clean.Clean and disinfect dialysis machine surface chair equipment and surrounding area between treatments according to facility policy.Conduct all tasks necessary for preparation for dialysis treatment and document where appropriate.Perform all required pretreatment dialysis machine alarm testing including Pressure Holding (PHT).Initiate Solution Delivery System (SDS) system.Ensure that all blood spills are immediately cleaned with appropriate disinfectant according to facility policy.Prepare organize and efficiently utilize supplies and equipment to prevent wastage.CLERICAL & ADMINISTRATIVE:Complete and document ongoing participation in Continuous Quality Improvement (CQI) activities.Enters all treatment data into the designated clinical application accurately and in a timely manner.Review treatment sheets for completeness ensure nursing signatures are documented and ensure omitted entries are completed or corrected where appropriate.Prepare initial patient chart for admission and compile paperwork for appropriate placement in chart.Prepare lab requisitions for prescribed or stat Lab specimens according to laboratory destination.Collect label appropriately prepare and store lab samples according required laboratory specifications.Ensure collection of lab specimens by appropriate lab courier.OTHER:* Perform additional duties as assigned.ADDENDUM FOR PATIENT CARE TECHNICIANS WORKING IN THE HOME PROGRAMS (NOT HOME ASSIST):Assisting the HT RN:May assist HT RN on Home Visit as directedReinforces PD / HHD education under supervision of qualified HT RNSchedules and contacts patients regarding appointmentsWeigh patient and obtain vital signsCollect treatment records and review for completion. Notify RN of incomplete / missing records.Cleaning and prepping treatment room; prep chartsPreparing lab tubes and requisitions & assisting with lab draw days both pre and post draw (PCT certified phlebotomy or per state regulations)Clerical duties as assigned (faxing mailing to physician offices etc.)Obtain home hemo water sampling as directed by the HT RNSet-up of the home hemo machine and PD Cycler.Assist with exit site care when directed by HT RN.Warm dialysate solution when directed by the HT RNDraw dialysate solution for testing as directed by the HT RNCreates and sends patient reminders (supply inventory for order Kt/V collection bringing meds to clinic visit for review)Assembles/breaks down charts/thins chartsMaintains logs as directed and applicableInventory of Home ProgramMaintains par levels of home department suppliesFiles home patient packing slips/invoicesInventory for PatientsAssists patient with supply management and contacting customer servicePHYSICAL DEMANDS AND WORKING CONDITIONS:The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Employees are required to take the Ishihara's Color Blindness test as a condition of employment. Note that: Failing the Ishihara Test Blindness does not preclude employment. The Company will consider whether reasonable accommodations can be made.Day to day work includes desk and personal computer work and interaction with patients facility staff and physicians. The position requires travel between assigned facilities and various locations within the community. Travel to regional Business Unit and Corporate meetings may be required.The work environment is characteristic of a health care facility with air temperature control and moderate noise levels. May be exposed to infectious and contagious diseases/materialsThe position provides direct patient care that regularly involves heavy lifting and moving of patients and assisting with ambulation. Equipment aids and/or coworkers may provide assistance. This position requires frequent prolonged periods of standing and the employee must be able to bend over. The employee may occasionally be required to push and/or pull equipment exerting up to 15 pounds of force. The employee may be required to lift and to lower solutions on a frequent basis of up to 30 lbs. and on an occasional lift basis up to 40 lbs. as high as 5 feet. There is a two-person assist program and material assist devices for the heavier items.EDUCATIONCenter for Medicaid/Medicare Services (CMS)-approved state and/or national certification or High School diploma or G.E.D. and must meet certification requirements within the required state or CMS timeline.All appropriate state licensure education and training (if any) required.EXPERIENCE AND REQUIRED SKILLSPrevious patient care experience in a hospital setting or related facility preferred.Continued employment is dependent on successful completion of the FMCNA dialysis training program and successful completion of CPR certification.Fresenius Medical Care maintains a drug-free workplace in accordance with applicable federal and state laws.

Service Technician

BONE EQUIPMENT North Reading, MA

Job DescriptionJob DescriptionDescription:UNDER NEW OWNERSHIP! Join our newest dealership, Bobcat of Boston. As part of the family that includes Bobcat of New Hampshire, Bobcat of Cape Cod and Bobcat of South Shore, we're looking for individuals who are passionate about our brand and are excited to be a part our growth.Are you interested in a career in the equipment industry? Do you value your weekends for rest and relaxation? Look no further! At Bobcat of Boston, we are closed on weekends. Don't miss out on being part of our dynamic team.Why Work HereThree Bobcat dealerships in MA within 4 years. That makes 5 locations in MA and NH.Our leadership has created an amazing work environment for our employees!!Regular employee appreciation lunches are a thing and are also celebrated with our local first responders!Laughing, working hard, enjoying the people you work with and for is what makes a great company.Employees pay zero dollars out of their paycheck for employee health insurance! We also pay 75% of the cost for your dependent's health insurance. And, we pay the first $3,000/$6,000 of the deductible.We give you a 100% company match up to 4% on your 401(k) retirement plan contributions! That’s a dollar-for-dollar match!Need some time off to balance work and life? We've got you covered with generous PTO, paid holidays and floating holidays!And There’s More…We are the region’s premier source of compact landscape, construction and snow removal equipment. We also offer Bobcat's newest line, Garden Maintenance Equipment (GME).Our team owns the largest Bobcat dealers in Northern New England.We have one of the largest rental fleets in the region.We offer some of the newest and most advanced equipment.Job ResponsibilitiesPerform mechanical service on Bobcat equipment and attachments.Diagnose and repair basic electrical and electronic systems.Diagnose and repair diesel engine mechanical and management systems (diesel fuel injection).Diagnose and repair hydraulics and hydraulic controls.Document diagnostic steps and repair steps performed to create a job story on the equipment.Utilize computer diagnostic systems and tools to identify problems.Perform preventative maintenance on equipment as needed.Complete on-line Bobcat University courses to advance knowledge that assist in understanding Bobcat systems.Interact with other team members to provide the best service possible to the customer.Requirements:Some essentials to be qualifiedMinimum 2 years’ experience repairing compact construction or related equipment or trucks/vehicles in professional or personal setting.Some technical training (degree or certificate) preferred but not requiredAn interest or passion to tinker and fix cars, trucks, equipment, etc. and can diagnose problems.Basic tool inventory.Ability to read and follow electrical and schematics and use computerized diagnostic systems.A strong work ethic including being punctual and dependable.Ability to meet the physical demands of the job including lifting up to 50 lbs. and standing, bending, reaching, crouching, etc.)Satisfactory results of a criminal background screeningImportant DetailsHighly Sought After Schedule: Monday – Friday, 7:30 am – 4:30 pm! No weekends!Work Location: Bobcat of Boston, 20 Concord Street, North Reading, MAAll of Our Locations: Bobcat of New Hampshire (Chichester, NH and Hudson, NH), Bobcat of Cape Cod (Bourne, MA), Bobcat of South Shore (Bridgewater, MA) and Bobcat of Boston (North Reading, MA)Pay: competitive hourly rate based on experience (40-hour workweek) (entry-level through advanced encouraged to apply). Remember, great benefits are also part of your total compensation.Benefits enrollment is first of month following 30 days of employment.Benefits: Health Insurance (100% company paid for Employee, 75% for 2-Person and Family coverage), Health Reimbursement Account with generous company contribution toward deductible, Dental (75% company paid), Life (100% company paid), Vision (100% employee paid), 401(k) Retirement Plan with generous 100% match up to 4% of annual salary.Paid Time Off (PTO) bank accrued weekly, Paid Holidays (8) and Floating Holiday (1).Get StartedClick "Apply Now" to get started.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other characteristic protected by applicable federal, state or local laws.

CAD Technician

Actalent North Reading, MA

Job DescriptionJob DescriptionJob Description:The CAD Technician is responsible for producing detailed technical drawings that support standardized industrial workspace and material handling designs. This role focuses on translating existing examples and evolving design concepts into accurate, scalable drawing sets used across a large operational network.Responsibilities:Create plan and elevation views for material handling equipment, work areas, and system components.Ensure precision, consistency, and adherence to established design standards.Deliver high-quality outputs with minimal direction.Collaborate closely with cross-functional partners.Essential Skills:Minimum 5 years operating experience in CAD with ability to work and manage layers.Minimum of an Associates Degree in Drafting and Design.Experience/exposure to AutoCAD and Revit.Minimum of 1 year experience drawing in a warehouse or fulfillment center environment.Basic knowledge of material handling and storage systems.Additional Skills & Qualifications:Conveyor design and layout experience.Mechanical or Industrial Engineering degree.Ability to communicate to various audiences.Ability to lead small groups.Work Environment:This position offers the opportunity to contribute to large-scale industrial design standardization efforts with visible operational impact. Candidates gain hands-on experience supporting evolving facility designs, exposure to complex material handling systems, and the chance to build deep technical expertise while working with collaborative, fast-moving teams.2 positions available. Job Type & LocationThis is a Contract position based out of North Reading, MA.Pay and BenefitsThe pay range for this position is $35.00 - $40.00/hr.Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in North Reading,MA.Application DeadlineThis position is anticipated to close on Feb 27, 2026.About ActalentActalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500.The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email [email protected] for other accommodation options.

High salary

Technician

Buckeye Supply Corporation Port Reading, NJ

Buckeye is the premier infrastructure and logistics provider for the world's energy needs, both today and tomorrow. Since 1886, we have successfully navigated transitions in the way energy has been distributed to continually meet the needs of an evolving market and industry environment. Our people are a critical element to the success and longevity of our operational history and our future as we seek to thrive through the energy transition. We own and operate a diversified global network of integrated assets providing midstream logistic solutions, primarily consisting of the transportation, storage, processing, and marketing of liquid petroleum products. We are committed to safely and responsibly providing world-class service to meet the continually evolving energy needs of our customers and the communities we serve. As part of this commitment to our customers, we are continually diversifying our platform and service offerings to enable less carbon intensive energy solutions and undertaking decarbonization efforts on our operations. Buckeye Partners is currently seeking a Technician with experience in pipeline, terminal or plant operations and maintenance in the Oil & Gas Industry to join our team! Role Summary: The Technician role is responsible for maintaining, troubleshooting and repairing equipment and pipeline and terminal facilities. Technicians perform routine operations and maintenance on equipment at pump stations (tank farms), remote booster stations, pipeline ROW, pipeline facilities, remote valve sites, and delivery terminals. Essential Duties & Responsibilities include: Maintenance Projects. Performing overall troubleshooting and maintenance support for pipeline and terminal facilities in the assigned area including planning, estimating, scheduling and cost controlling. Compliance. Performing and recording regulatory and Company policy preventative maintenance inspections and procedures as identified in the Maintenance and/or Regulatory Manuals and in JDE system. Continuous Education. Maintaining a high level of knowledge relating to new and current technology and equipment. Management. Procuring and managing the efforts of outside contractors as required. Policy Implementation. Implementing company policies, standards, drawings, diagrams and construction specifications for the installation of new facilities and the repair or upgrade of existing facilities. Product Training. Training Operations personnel and others in the use of new or modified equipment or software. Documentation. Maintaining equipment records and furnishing documentation per Company policy of work performed. And other duties as assigned. Position Requirements: Two-year associate's degree in a technical field (electrical, electronic, or mechanical) OR the equivalent combination of education/work experience is required. Experience in pipeline, terminal or plant operations and maintenance is required. Experience installing or troubleshooting PLC's(B&R, Siemens, Allen Bradley) and truck/rail load rack presets (Accuload, Multiload) preferred Experience in Measurement of Liquids or Gas is preferred Must reside within 45 minutes normal driving time of the work location. Certificates & Licenses: Valid driver's license Other Skills, Attributes and Abilities: Must have the ability to navigate basic computer systems (i.e. Windows). Basic knowledge of SCADA applications and MS Office applications is a plus. In order to be successful in this position, the individual must possess good communication (both oral and written) and interpersonal skills. The individual must have good analytical skills and good technical aptitude. Essential Functions: This position requires the ability to safely and successfully perform essential job functions consistent with ADA, FMLA and other federal, state and local standards, including meeting qualitative and or/quantitative productivity standards. This role requires the ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards. This position requires compliance with all personnel policies. Physical & Safety Requirements: The individual must meet medical criteria established by OSHA for emergency response. The individual must be capable of performing the physical labor required to complete the responsibilities of this position (including capability to use related tools and work equipment). About You: To be successful in the Buckeye culture, our employees must possess a demonstrated commitment to environmental responsibility and regulatory compliance. Excellent communication, both written and verbal, as well as strong organizational skills are paramount. You must work independently and be able to exercise tact, discretion, and professionalism when dealing with internal and external customers, and when handling sensitive and confidential information. Buckeye wants to create and reward an organizational focus that stimulates the creative and entrepreneurial actions of its employees that result in innovative ways of reducing costs, generating revenues, improving productivity, or improving processes. People First Culture: From managing over 5,000 miles of pipeline to commercializing clean energy projects, our people collaborate to provide world-class service and meet the changing energy needs of our customers. Our employee-first culture means that we invest in our employees and equip them to be fully contributing members of high performing teams. We are focused on collaboration, inclusion, empowerment, accountability, and professional development. We want the best in you to bring out the best in us. Join us as we work together to build a business that is responsive to the needs of the future while continuing to serve the energy needs of communities today. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Sterilization Technician

Pride Health Reading, PA

Job DescriptionPride Health is seeking Sterile Processing Tech role in for a contract role in Wilkes Barre, Pennsylvania, 18711Weekly Gross Pay: $1,450.00Start Date: 02/23/2026Job Duration: 13 weeksShift: Day 5x8-Hour Requirements:BLSCRCST/CBSPD*Offered pay rate will be based on education, experience, and healthcare credentials.Interested? Apply now!Recruiter: Anuj SinghContact: 612-509-2319Email: [email protected] Pride HealthPride Health is Pride Global's healthcare staffing branch, providing recruitment solutions for healthcare professionals and the industry at large since 2010.As a minority-owned business that delivers exceptional service to its clients and candidates by capitalizing on diverse recruiting, account management, and staffing backgrounds, Pride Health's expert team provides tailored and swift sourcing solutions to help connect healthcare talent with their dream jobs. Our personalized approach within the industry shines through as we continue cultivating honest and open relationships with our network of healthcare professionals, creating an unparalleled environment of trust and loyalty.Equal Employment Opportunity StatementAs a certified minority-owned business, Pride Global and its affiliates - including Russell Tobin, Pride Health, and Pride Now - are committed to creating a diverse environment and are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, pregnancy, disability, age, veteran status, or other characteristics.#GlobalDeliveryTravelAKPride Global offers eligible employee’s comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance, and hospital indemnity), 401(k)-retirement savings, life & disability insurance, an employee assistance program, legal support, auto, home insurance, pet insurance, and employee discounts

Repair and Tool Technician

The Home Depot Port Reading, NJ

Join to apply for the Repair and Tool Technician role at The Home DepotThe Repair and Tool Technician role at The Home Depot is a great opportunity to utilize your skills and experience in repairing small engines, outdoor power equipment, and handheld electrical devices.Job Description Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained. Technicians work in both our stores with Tool Rental Centers and in our repair centers.In a store, technicians will be expected to provide service to store customers in Tool Rental which includes writing customer contracts and invoices for equipment rental and tool repairs, checking to make sure tool is operating properly and demonstrating its proper use (as needed). In addition to supporting customer repair needs, they are also responsible for the day-to-day operation and maintenance of equipment in the tool rental department. In non-store locations, technicians will ensure units are repaired, tested for the quality of the repair and cleaned prior to returning to the store where the repair originated.Technicians must have a thorough knowledge of all tools and must effectively manage the tool inventory by maintaining the tools and repairing them as necessary.Benefits and Compensation Benefits offered include health care benefits, 401K, ESPP, paid time off, and success sharing bonus. The base pay range for this role is $21.00/hr - $21.00/hr.Seniority Level and Employment Type Seniority level: Not ApplicableEmployment type: Full-timeJob Function and Industry Job function: OtherIndustry: Consumer ServicesThe Home Depot is an Equal Opportunity Employer and is committed to diversity and inclusion.#J-18808-Ljbffr

C Technician

Midas Auto Experts Port Reading, NJ

Benefits401(k)Bonus based on performanceEmployee discountsHealth insurancePaid time offAt Midas we are dedicated to providing quality services to customer vehicles in the areas of inspection, diagnosis and repair utilizing the expertise attained through ASE Certifications and/or years of automotive repair experience.We are looking for Entry Level Technician (C Tech) that are able to work independently of others, while also being able to work collaboratively at times with peers. We have a full-service facility, and we are looking for automotive technicians to help us create an environment of success!ResponsibilitiesAs a Midas general service technician, you’ll be exposed to and have responsibility for performing a wide range of automotive maintenance services, including:Perform routine vehicle maintenance, including fluid exchanges/flushes and oil changes.Visual safety and courtesy inspectionsMounting, balancing, rotating tires and performing alignments.Replacing batteriesChanging bulbs, belts and hosesReplacing brakes and rotorsSuspension workMaintaining and cleaning shop areasWillingness to learn and grow as a technician.Other shop maintenance items as needed.QualificationsEntry level technicians must have prior knowledge of automotive basicsKnowledge of shop equipmentStrong mechanical aptitude and troubleshooting skillsDeadline and detail-orientedAbility to thrive in a fast-paced environmentValid driver’s licenseQualities that make you stand out from the restTeam playerHard workerWilling to help with other responsibilitiesCompletes thorough courtesy checks in a timely mannerAspires to grow.DedicatedQuality controls vehicles#J-18808-Ljbffr

Automotive Technician

Midas International, LLC North Reading, MA

Automotive Technician OverviewThank you for considering Midas to continue your career. We are in need of an experienced, career focused technician. The ability to effectively and accurately diagnose and repair a wide variety of vehicles is a must. A positive attitude and your own tools are also requirements. State Inspector or ASE certifications a plus. At Midas we are dedicated to providing quality services to customer vehicles in the areas of inspection, diagnosis and repair utilizing the expertise attained through years of automotive repair experience. We are a full-service facility, and we are looking for talented and self-motivated people to help us grow our business!Reasons to join Automotive Management GroupHere is just a few reason why you should consider working at AMG Enterprises:Looking for a fulfilling career as an automotive technician? Look no further! Join our team at Automotive Management Group and discover why we\'re the perfect fit for you:Cutting-Edge Technology: At AMG, we understand the importance of staying current with automotive technology. From advanced diagnostics to state-of-the-art equipment, we provide our technicians with the tools they need to excel in their craft and tackle even the most challenging repairs with confidence.Work-Life Balance: We value the well-being of our team members, which is why we\'re closed on Sundays. Enjoy regular weekends off to spend quality time with family and friends, pursue hobbies, or simply relax and recharge. With a healthy work-life balance, you\'ll feel energized and motivated to perform your best every day.Ongoing Training: The automotive industry is constantly evolving, and we\'re committed to helping our technicians stay ahead of the curve. Whether it\'s mastering new technologies, learning about the latest repair techniques, or enhancing customer service skills, we provide ongoing training and development opportunities to support your professional growth.Positive Work Environment: Join a team of passionate professionals who share your dedication to excellence. At [Your Company Name], you\'ll find a supportive and collaborative work environment where your contributions are valued and your skills are respected. We foster a culture of teamwork and mutual respect, ensuring that every member of our team feels valued and appreciated.Competitive Compensation: Your hard work deserves to be rewarded. At AMG, we offer competitive compensation packages, including competitive wages, performance-based incentives, and benefits such as health insurance and retirement plans. Earn a living wage while doing what you love and enjoy financial stability and security.Opportunities for Advancement: Ready to take your career to the next level? At AMG, the sky\'s the limit. We provide opportunities for advancement and career growth, whether you\'re interested in becoming a master technician, transitioning into a leadership role, or exploring new areas of specialization within the automotive industry.Joining our team means becoming part of a company that values innovation, work-life balance, and professional development. If you\'re passionate about automotive repair, dedicated to delivering exceptional service, and eager to take your career to new heights, we want to hear from you. Apply now and discover why Automotive Management Group is the perfect place for automotive technicians to thrive.Automotive Technician Benefits & PerksPaid TrainingPaid HolidaysASE reimbursementEmployer match 401KHealth insuranceAutomotive Technician RequirementsAbility to repair vehicles independently, while also having experience working well in a team environment.Knowledge in automotive brakes, exhaust, suspension, & engine diagnostics.Track record of high personal productivity.Knowledge of, and adherence to, safety and environmental standards for repair facilities.Automotive Technician QualificationsExperience using shop equipment such as lifts, Tire Changing Equipment, Tire Balancers, Wheel Alignment Equipment, etc.High School Diploma or equivalent. Technical Degree or ASE certifications a definite plus.Valid Drivers License that meets insurance guidelines.Personally owned tools required to complete jobs independently.Job Type: Full-time#J-18808-Ljbffr

Architectural Technician / CAD Technician Anatolia

Interior Designers of Canada Port Reading, NJ

The Draft/CAD Technician (freelancer) will provide technical drafting and design support to Anatolia on a project-by-project basis. This role focuses on creating high-quality technical drawings, rendering and design documentation to support product development, merchandising, marketing and showroom initiatives. They will visualize and develop beautiful spaces for the organization and also help to design the tile and stone products that adorn them. Working closely with our cross functional team which includes Product Development, Interior Design, Merchandising, Sales and Marketing.This is an independent contractor role ideal for professionals who can manage multiple projects and work in a flexible, contract based, primarily remote. This role may occasionally require in-person collaboration at the office for project coordination, design reviews, or team alignment, as needed.Job Responsibilities Design, update, and create technical drawings for product development, merchandising and marketing support materials.Create detailed line and color drawings for both our internal and external customers as well as outlining manufacturing guidelines and required specifications.Develop design plans for showroom build-outs, tradeshow booth designs, color plans, furniture and décor selection.Source materials and conduct cost analysis for projects.Work alongside the Senior Designer – Interior & Product Design and Senior Manager – Interior & Product Design to visualize and design new tile products to add to our extensive product line-up using various design software tools.Research and find photos and graphics for various in-house projectsEnsure that branding guidelines established by the company are adhered to on all projectsCollaborates and provides support for Product Development, Merchandising, Sales, Marketing and Creative teams to ensure project timelines are delivered on time.Performs other duties as assigned to support the maintenance and development of Anatolia’s various product lines.Ideal Qualifications Post-secondary education in Interior Design and/or Architectural Technician required1-5 years progressive experience in a similar role, ideally with direct or similar industry experienceAdvanced proficiency with a wide range of design software tools (e.g, AutoCAD, Sketchup, 3D Studio Max, Photoshop, Illustrator, InDesign etc.) for creating 2D and 3D renderings. Strong verbal and written English communication skills necessary.#J-18808-Ljbffr

Diesel Technician Trainee

Milton CAT North Reading, MA

OverviewWe are looking for highly driven, mechanically inclined individuals passionate about developing a career as Heavy Equipment or Electric Power Generation technicians to join the Milton CAT Diesel Technician Trainee program! The Diesel Technician Training program has a set start date in June 2026 , and we are hiring now for a limited number of trainee spots.Applications will be accepted from mid December through the end of February. We plan to begin our application review process in late January. This is a paid training program. Starting pay rate for Trainees hired for MA locations is $25.75/hr .Why Milton CATThe exclusive authorized dealer of Caterpillar equipment in the Northeast, Milton CAT is one of the largest Caterpillar dealerships in the world and is the “big kid’s sandbox” for the most recognizable earthmoving and power systems equipment in the world. Milton CAT is looking to invest in and develop the right candidates to expand our service team.Great starting pay: $25.75/hrPaid Time Off + 8 company paid holidaysBenefits: Health insurance, retirement plan, and additional Union benefitsUnion Position with $5.25/hr pension contributionEmployee Referral Program: earn money for referring people to work here!Exceptional training, advancement opportunities, and cultureYearly tool and safety footwear allowancesResponsibilitiesThe Diesel Technician Training program consists of 2,400 hours of intensive training across a 15‑month period, including:2,000 hours of hands‑on, on‑the‑job training200 hours of classroom learning200 hours of online, computer‑based trainingTrainees will rotate through a variety of technical areas within our facilities and work elbow‑to‑elbow with some of the best Caterpillar technicians in the industry.Regional travel may be required to attend on‑site orientations and training classes as assigned.The Diesel Technician Trainee program is a highly selective program. Candidates must complete an online application to be considered for the program. Successful applicants will participate in an interview process prior to being notified of a decision regarding acceptance into the program. Acceptance is not guaranteed as spaces are limited.Upon successful completion of the Diesel Technician Trainee program, Trainees have the opportunity to be offered a full‑time technician position at any Milton CAT or Milton Rents location.QualificationsHigh school diploma or GED required1+ years of experience servicing heavy equipment, or equivalent education in automotive/diesel/related mechanical vocational program strongly preferredStrong adherence to safety, and strong customer service, problem solving, and communication skillsAbility to lift up to 50 lbs. unassistedSolid mechanical aptitude with a desire to learn and ability to adaptProficient in the use of computer technology (laptop and related software systems)Clean and valid driver’s license requiredThis job description is not intended to be all-inclusive. Your supervisor may request and assign similar duties.Resumes that are mailed, emailed, or hand‑delivered to Milton CAT or any employee will not be considered. You must apply online. A background check and drug test are required as part of our pre‑employment process.Equal Employment OpportunityMilton CAT is an equal opportunity employer that values the strength diversity brings to the workplace. We encourage applications from individuals with disabilities, minorities, veterans, and women. Applicants receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, sexual orientation, handicap, disability, veteran status, genetic data, or other legally protected status. We base all employment decisions to further this principle of equal employment opportunity. VEVRAA Federal Contractor. EEO/AA employer.#J-18808-Ljbffr

Automotive Technician

Lithia Motors, Inc Port Reading, NJ

Automotive Technician page is loaded## Automotive Technicianlocations: Woodbridge Hyundai, Woodbridge, ON L4L 9C3time type: Full timeposted on: Posted 3 Days Agojob requisition id: R100561Automotive Technician-Woodbridge Hyundai, Woodbridge, ON L4L 9C3Here at Pfaff Automotive, our passion for automotive comes to life with the vehicles we service. Our team of high-performing technicians plays an integral role in our business; efficiently ensuring our customer vehicles are safe and at peak performance - allowing us to fulfill our mission of earning customers for life.We are looking for top 310S technician talent to join our team at Woodbridge Hyundai and lead us to the road to success.**As a Technician you will..*** Performs repairs on vehicles as assigned.* Performs vehicle inspections and assessments including diagnosis issues.* Documents all work performed to Manufacturer standards and/or recommended on the repair order.* Road tests vehicles as required.* Ensures that customer cars are kept clean.* Attends all training courses as requested by service management.* Assists in training and supervising apprentice technicians.**Why Work For*** **Competitive Compensation** - whether you are working in sales, service, parts, or in a support function, Pfaff offers a competitive compensation package.* **Health Benefits** – full-time employees have access to health, dental, long-term disability and life insurance.* **Vacation and Paid Time Off*** **Growth Potential** – we want to support your success! We provide access to opportunities for growth in both Canada and the U.S.* **Stock Purchase Program** - Pfaff employees can purchase the Lithia & Driveway stock (NYSE: LAD) at a discount.We thank all applicants for their interest in Pfaff Automotive Partners –*Pfaff Automotive Partners is an equal opportunity employer and is committed to providing accessible employment practices that are in compliance with the Accessibility for Ontarians with Disabilities Act (AODA). If you require accommodation for disability during any stage of the recruitment process, please indicate this in your application.*At Pfaff, people are the heart of our organization, and providing a great workplace is an essential part of fueling our success. We have a 60-plus year history in Canada, with a reputation built on a passion for performance, a love of cars and the car business, and exceptional customer care.Now, as part of Lithia & Driveway, the largest publicly traded dealership group in North America, Pfaff is part of a network of over 300 stores in Canada, the U.S., and the United Kingdom. Our network offers high performing individuals nearly unlimited opportunities for advancement.With guidance from our mission, **Growth Powered by People**, we have created a workplace where employees can learn, grow, and succeed.Our experienced teams and innovative ideas drive our success, and we’re looking for more talent to join us on the open road of achievement.#J-18808-Ljbffr

Toolroom Technician

Pennsylvania Staffing Reading, PA

Toolroom TechnicianHours are 6:30am -- 3:00pm Monday thru Friday. With general supervision, the Toolroom Technician will shop equipment to fabricate and build thermoform tooling that produces heavy gauge and thin gauge parts for several different markets that Brentwood provides for. The Toolroom Technician will also fabricate components for production equipment as needed to keep production operating. Employees may perform other related duties as required to meet the ongoing needs of the organization.Essential Responsibilities:Focus on, and mastery of one or more areas of building tooling, for light/heavy gauge thermoforming, and tooling for punch press operations and progressive punch & dies.Performs required manual machining to aid in the building of sample and production tooling.Refers to senior team members and peers to secure process of make and build.Assembles prototype and production tooling.Polishes and vents all required vacuum holes according to the engineering specifications for prototype and production tooling.Performs routine maintenance on Tool Room equipment.Studies blueprints, sketches, drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of finished tooling for work pieces, and determine sequence of operations, and setup requirements for successful completion to print and communicated requirements.Follows all work instructions, shop orders and forms. Reads blueprints and uses precision measuring devices in conjunction with Engineering to meet customer requirements.Assist production in modifying or repair tooling to help keep production running.Maintain the inventory and storage of all raw plastic materials. Works with Customer Satisfaction, Production Control, and the Tooling Supervisor regarding specific job requirements.Maintains a clean and organized work area. Ensures the correct storage systems for prototypes, sample dies, raw materials, plugs, pug assists, and other necessary accessories.Essential Skills:High School Diploma or equivalent, two Years previous machine shop experience or equivalent preferred.Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.Ability to write routine reports and correspondence.Ability to speak effectively before groups of employees of the organization.Basic ability to calculate figures utilizing drawings dimensions.Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.Ability to deal with problems involving several concrete variables in standardized situations.Ability to read measuring equipment including but not limited to; calipers, micrometers, height gauges, tape measure, hole gauges, depth gauges, etc.Brentwood offers professional growth potential, pleasant work environment, and an excellent wage and benefits package including 401K w/employer match. Brentwood Industries, Inc., provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. At Brentwood, we have a passion for both our products and our people. Our goal as an employer is to help you excel as an individual and as part of a team by providing you with a satisfying, motivating and stimulating work experience. The varied nature of the environment at Brentwood allows you to work alongside industry professionals on a wide range of projects, contributing your knowledge and strengths to develop innovative, market-driven solutions.

Fiscal Technician

County of Berks (Pennsylvania) Reading, PA

Fiscal TechnicianStarting Salary: $45,619 annuallyPosition SummaryThe Fiscal Technician performs advanced bookkeeping duties in recording, reviewing, processing, and controlling financial records and documents for propriety, quality, and conformance to established accounting procedures. This position works under minimal supervision.Position Responsibilities1. Reviews, posts, and processes financial documents.2. Posts accounting data to ledgers and journals.3. Prepares proceduralized financial reports.4. Analyzes records to determine accuracy and completeness.5. Maintains records and accounts.6. Makes routine adjustments to accounts.Minimum Education and ExperienceOne year as a Fiscal Assistant, OR;Three years of experience involving financial records, OR;Associate degree in accounting, OR;Associate degree with accounting courses and one year of experience in finance.Any equivalent combination of experience and training that provides the required knowledge, skills, and abilities.Minimum Knowledge, Skills, and AbilitiesWorking knowledge of modern office practices and equipment.Working knowledge of accounting principles and methods.Ability to perform detailed work with written or numerical data and make arithmetical calculations rapidly and accurately.Ability to prepare routine and financial reports and statements.Ability to apply and adapt established methods to financial transactions.Ability to establish and maintain working relationships.Attention to detail.Ability to handle stress.Physical presence in the office is required.Physical DemandsWork involves walking, talking, hearing, using hands to handle, feel objects, tools, or controls, and reaching with hands and arms. Vision abilities required by this job include close vision and the ability to adjust focus.The employee must occasionally lift and/or move up to 10 pounds, fifteen (15) feet or less.Intense concentration; working at a PC all day, every day; ability to remain seated for extended periods of time.Working EnvironmentNormal office environment.This position description serves as a guideline for communicating the essential functions and other information about the position to the applicant/employee. It is not intended to create a binding employment contract nor cover every detail of the position, and may be changed where appropriate.

MAINTENANCE TECHNICIAN

Packaging Corporation of America Reading, PA

As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers - large and small - package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility. People * Customers * Trust Pay and Benefits Pay Range from $25.97/hr - $31.86/hr based on skills and experience. Excellent Benefits Package including Health, Dental, Vision, and 401K Plan. 1.5 pay over 40 hours. Uniforms provided. Up to 100 paid training hours annually for technicians to advance through the progressive skill levels. Stipend for safety shoes and safety glasses. RESPONSIBILITIES: Perform a variety of maintenance tasks to diagnose, repair, rebuild, replace mechanical, electrical, PLC, hydraulic and pneumatic systems on all plant equipment and facilities. Use maintenance knowledge to increase productivity, decrease downtime and waste. Work with a sense of urgency to respond to machine downtime events. Will be required to complete in-house training programs to develop equipment specific maintenance skills. The position may also require attendance at external training that may require occasional overnight travel. Must be able to follow all safety and company policies that include lock-out tag-out procedures. BASIC QUALIFICATIONS: At least 1 year of experience successfully troubleshooting and repairing industrial manufacturing equipment. Must have knowledge and experience with repairing and maintaining mechanical, electrical, hydraulic, pneumatic, PLC systems and industrial equipment. Be passionate about maintaining a safe and clean work environment. Ability to work any shift, overtime, and weekends as needed. Must have own basic tools (PCA will provide specialized tools). Must be authorized to work in the U.S. PREFERRED QUALIFICATIONS: Technical degree and/or comparable experience in successfully troubleshooting and repairing industrial machinery and equipment; particularly within the corrugated or packaging industry. KNOWLEDGE, SKILLS & ABILITIES: Excellent communication skills. Basic computer skills. Ability to work in a fast-paced environment.All qualified applicants must apply at Careers.packagingcorp.com to be considered.PCA is an Equal Opportunity Employer - Veterans/Disabled and other protected categories.

Posted 6 hours ago

Technician I

Carpenter Technology Corporation Reading, PA

Carpenter Technology Corporation is a leading producer and distributor of premium specialty alloys, including titanium alloys, nickel and cobalt based superalloys, stainless steels, alloy steels and tool steels. Carpenter's high-performance materials and advanced process solutions are an integral part of critical applications used within the aerospace, transportation, medical and energy markets, among other markets. Building on its history of innovation, Carpenter's wrought and powder technology capabilities support a range of next-generation products and manufacturing techniques, including novel magnetic materials and additive manufacturing.Position Title: Technician I – Met LabJob Summary:Prepares samples for analysis or examination and performs a limited range of basic metallurgical services under direct supervision of the Group Leader. Conducts mechanical and magnetic tests using standard equipment including hardness testing, tensile testing, resistivity, and other routine evaluations. Performs metallographic testing using etchants, polishing tools, and standard metallographic equipment. Collects and records test data, supports production needs, completes assigned duties, and participates in special projects as required.This position may be located in Mechanical Testing, Preparation, Metallographic Testing, Magnetic Testing, or Heat Treating.Primary Responsibilities:Prepare samples for metallurgical evaluation.Perform mechanical and magnetic tests (e.g., hardness, tension/tensile, resistivity).Conduct metallographic tests using etchants, polishing, and standard equipment.Collect, document, and record test data accurately.Support special projects and other duties as assigned.Work in any of the following areas depending on assignment: Mechanical Testing, Preparation, Metallographic Testing, Magnetic Testing, or Heat Treating.Position Requirements:Education and/or Training:High school diploma required.Other Technical Knowledge:Elementary understanding of metallurgical principles, standards, methods, and practices.Basic knowledge of metallurgical and laboratory equipment.Carpenter Technology Company offers a competitive salary and a comprehensive benefits package including life, medical, dental, vision, flexible spending accounts, disability coverage, 401k with company contributions as well as many other options to employees.Carpenter Technology Corporation's policy is to fully and effectively maintain a program of equal employment opportunity and nondiscrimination for all employees, to employ affirmative action for all protected classes, and to recruit and develop the best qualified persons available regardless of age, race, color, religion, sex, gender identity, sexual orientation, marital status, national origin, political affiliation or any other characteristic protected by law. The Company also will recruit, develop and provide opportunities for qualified persons with disabilities and protected veterans.

Industrial Maintenance Technician

Packaging Corporation of America Reading, PA

As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers - large and small - package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility.People * Customers * Trust Maintenance TechnicianPackaging Corporation of AmericaReading PlantReading, PA 2ND SHIFT (3PM-11PM)3RD SHIFT (11PM-7AM) Pay and BenefitsPay Range = $26. - $36.00based on mechanical and electrical skills and experience.Excellent Benefits Package (Health, Dental, Optometry)401K Plan1.5 Pay over 8 hrs. and over 401.5 Pay Saturday and Sunday1.5 Pay Holidays + additional OT over 8 hours on holidaysUniforms ProvidedPCA provides paid training to help technicians advance through the skill levels and achieve higher pay.Technicians supply their own basic hand tools.PCA provides a tool stipend (or replacement) to help technicians maintain basic hand tools.PCA provides all special and heavy tools.PCA provides Safety shoes and Safety Glass stipends ResponsibilitiesThis position is based at the PCA Box Plant located in Reading, PA.This position will perform a variety of maintenance tasks including diagnosing, repairing, rebuilding, or replacing mechanical, electrical, hydraulic, and Pneumatic systems on plant equipment.Technicians work as part of a team to safely perform Preventive Maintenance Activities as well as answer break down calls in a Production Environment.All Maintenance Technician positions are Multicraft and training is provided to develop these skills. Basic Qualifications2+ Years' experience in successfully troubleshooting and repairing industrial machinery.A Technical Degree in the Mechanical or Electrical Trades is a plus.The production schedule is 3 shifts. Maintenance Technicians are placed on shifts according to plant needs and seniority. Opportunities to change shifts are available when organization changes occur or production schedules change.Be Authorized to work in the US.Experience in the Corrugated Packaging or Printing Industry is a plus. COMPENSATION AND BENEFITSStarting salary for position: $26.00 -36.00 per hour.Bonus: Annual - Based upon achievement of plant performance metrics. Paid Vacation: 2 weeks per calendar year. Pro-rata Vacation during the initial year of hire based upon start date within the calendar year. Paid Holidays.Within the first 30 days of employment, an employee (and their dependents) is eligible to enroll in certain benefit coverages -- medical, dental, and vision - and are automatically enrolled in life, AD&D, and disability coverages.Upon hire, an employee is automatically enrolled in the 401k plan. The plan offers both pre-tax and Roth contribution options along with employer provided matching contributions.Disclaimer: The Compensation and Benefits information in this posting represents PCA's good faith and reasonable estimate of what it may pay for this position. The Company reserves the right to modify this information at any time, subject to applicable law. PCA is an Equal Opportunity EmployerQualified Applicants must apply at careers.packagingcorp.com to be considered.

Injection Molding Technician

AMMEGA Reading, PA

Summary The Molding Technician 1 will be responsible for performing insert/impressions and/or material changes as dictated by the schedule; part inspections and various other functions to ensure part conformity and quality; verifying paperwork for jobs and completion of inspections at start-up of jobs and in process inspections; monitoring and preparing support equipment i.e., circulators, grinders, etc. The Technician will also be responsible for ensuring parts produced are of acceptable quality for production and ensuring all tools and equipment are kept clean and in good repair.Primary Responsibilities and Duties * Ensures all safety procedures are followed and actively works to improve our safety program. * Ensures all quality procedures are followed and actively works to improve our quality program. * Follows all procedures & work instructions. * Works to maintain a clean & organized working environment (5s) *Completes visual inspection on products through the shift. *Completed and demonstrated thorough understanding of the Utility Technician tasks listed in the Molding Skills Matrix. *Performs all the functions and responsibilities of a material handler. * Performs mold, insert, and impression changes. * Set up End of Arm tooling for robots. * Identify unacceptable reject levels. * Respond to machine alarms and restart all machines in a timely manner. * Responsible for proper handling and care of all materials, molds, and tooling * Responsible for clear and consistent communication between shifts * Responsible for the continuous operation of production equipment * Help promote a positive work environment. * Works to help achieve company goals and objectives. *Other duties as assigned.Secondary Responsibilities Opportunity to be selected for the role of ISO Internal Auditor, with responsibilities including conducting internal audits to ensure compliance with ISO standards and contributing to continuous improvement initiatives. *Must demonstrate awareness of ISO standards and actively participate in Integrated Management System (IMS) audits to support compliance and improvement effortsKnowledge and Skill Requirements * HS Diploma or equivalent * Trade school a plus * Tow motor experience/pallet jack preferred. * Must be able to work in the US * General maintenance and tool knowledge required. * Proficient math skills and attention to detail Competencies * Knowledge of commonly used concepts, practices, and procedures within the injection molding field. * Strong attention to detail * Ability to prioritize and follow-up on tasks with timely completion. * Communicates effectively. * Works well within a Team environment. * Experience working in a fast-paced environment with limited supervision. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential job functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. *Ability to frequently lift up to 55 pounds. *This position is very active and requires frequent standing, walking, bending, kneeling, stooping, crouching, crawling, climbing; use of hands to finger, handle or feel, reach with hands and arms. *This position requires frequent communication with other employees. Must be able to exchange accurate information in these situations. *Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

Diesel Technician Trainee

Milton CAT North Reading, MA

Diesel Technician TraineeJob LocationsUS-MA-North ReadingID2025-6035CategoryService / TechnicianTypeFT Union (FTU)OverviewWe are looking for highly driven, mechanically inclined individuals passionate about developing a career as Heavy Equipment or Electric Power Generation technicians to join the Milton CAT Diesel Technician Trainee program! The Diesel Technician Training program has a set start date in June 2026, and we are hiring now for a limited number of trainee spots. Applications will be accepted from mid December through the end of February. We plan to begin our application review process in late January. This is a paid training program. Starting pay rate for Trainees hired for MA locations is $25.75/hr. Why Milton CAT? The exclusive authorized dealer of Caterpillar equipment in the Northeast, Milton CAT is one of the largest Caterpillar dealerships in the world and is the "big kid's sandbox" for the most recognizable earthmoving and power systems equipment in the world. Milton CAT is looking to invest in and develop the right candidates to expand our service team. Great starting pay: $25.75/hrPaid Time Off + 8 company paid holidaysBenefits: Health insurance, retirement plan, and additional Union benefitsUnion Position with $5.25/hr pension contributionEmployee Referral Program: earn money for referring people to work here!Exceptional training, advancement opportunities, and cultureYearly tool and safety footwear allowancesResponsibilitiesThe Diesel Technician Training program consists of 2,400 hours of intensive training across a 15-month period, including:2,000 of hands on, on-the-job training200 hours of classroom learning200 hours of online, computer-based training Trainees will rotate through a variety of technical areas within our facilities and work elbow-to-elbow with some of the best Caterpillar technicians in the industry. Regional travel may be required to attend on-site orientations and training classes as assigned. The Diesel Technician Trainee program is a highly selective program. Candidates must complete an online application to be considered for the program. Successful applicants will participate in an interview process prior to being notified of a decision regarding acceptance into the program. Acceptance is not guaranteed as spaces are limited. Upon successful completion of the Diesel Technician Trainee program, Trainees have the opportunity to be offered a full-time technician position at any Milton CAT or Milton Rents location.QualificationsHigh school diploma or GED required1+ years of experience servicing heavy equipment, or equivalent education in automotive/diesel/related mechanical vocational program strongly preferredStrong adherence to safety, and strong customer service, problem solving, and communication skillsAbility to lift up to 50 lbs. unassistedSolid mechanical aptitude with a desire to learn and ability to adaptProficient in the use of computer technology (laptop and related software systems) Clean and valid driver's license required This job description is not intended to be all-inclusive. Your supervisor may request and assign similar duties. Resumes that are mailed, emailed, or hand-delivered to Milton CAT or any employee will not be considered. You must apply online. A background check and drug test are required as part of our pre-employment process. Milton CAT is an equal opportunity employer that values the strength diversity brings to the workplace. We encourage applications from individuals with disabilities, minorities, veterans, and women. Applicants receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, sexual orientation, handicap, disability, veteran status, genetic data, or other legally protected status. We base all employment decisions to further this principle of equal employment opportunity. VEVRAA Federal Contractor. EEO/AA employer.