Maintenance Clerk jobs in North Kansas City

Clerk, Shipping & Receiving

Visually inspects all incoming products for compliance to the purchase order received with the shipment in accordance with established policy and procedure. The inspection shall focus on the product's received condition including identification, configuration, completion, condition, quantity and appropriate certification. -Verifies purchased products were obtained from an approved source as listed on the qualified vendor listing, and directs the product to the appropriate area for inspection. Identifies material requiring inspection using the check for acceptance (CFA) process in accordance with established policy and procedure. -Researches and reconciles discrepancies noted during the cycle count process; completes discrepancy reports and performs computer system data entry from receiving documentation in accordance with established policy and procedure. Segregates non-conforming material from accepted material to prevent inadvertent use. -Communicates non-conformities found with the appropriate department. -Cleans incoming trays and moves parts from gateway to engine trays. - Moving of aircraft engines, engine containers, materials transport containers and facility maintenance equipment with forklifts between plants. -Organizing engine container yards for cleanliness and orderliness - Preparation of aircraft engine containers for shipment -Installing aircraft engines into transport containers -Operates a forklift truck within all safety guidelines; fuels vehicle when needed and notifies supervisor when problems are encountered with its operation -Conducts an inventory of engine parts located on the engine trays to determine part requirements for build kit completion. - Liaises with production planners to locate parts, expedite work, and/or obtain estimated completion dates. -Logs received and shipped items into production management receiving system to maintain lot control registry. .-Provides materials, components and engines in a timely manner by physically moving them from stock points either manually or by way of material handling equipment (i.e., forklift, pallet jack, etc.) -Uses the production management computer system to dispense and receive information such as receipts, transfers, returns, cycle counts, product codes, part numbers, quantities, comments, outstanding demands, non-conformance tags, etc. -Stocks consumables and parts on warehouse shelving. -Arranges parts/components into kits as per original equipment manufacturer parts manuals. -Prepares and completes a variety of documentation required for credit and export compliance, vendor returns, picking and shipping of parts, service center transfer shipments, etc. -Controls data integrity of inventory systems by creating and updating system files. Relocation Provided: No As a Shipping Clerk , you'll have responsibility in ensuring incoming materials are routed properly and our finished product is sent back to our customers in a timely manner. What you'll do: Reconcile incoming BOL. Check for damage and create a damage report. Verify customer's paperwork for shipping and raise a discrepancy if not accurate. Place applicable paperwork and ship label on box After a brief handoff to the induction team, verify routing information and move the parts to the appropriate cell Once parts have been repaired move them back to shipping/receiving. Verify part numbers and create initial shipping paperwork. Use best practices to pack materials for shipment back to customer. Work with the StandardAero Customer Service team to understand shipping instructions and create labels. Finalize shipment. Position Requirements: Experience working in a warehouse environment in shipping/receiving Ability to lift up to 50 pounds for approximately 25% of the average workday. Ability to walk and stand for long periods Preferred Characteristics: Experience with FedEx Ship Manager, UPS OneWorld, DHL, and similar systems. Well organized with attention to detail. Strong interpersonal skills. Ability to think outside the box when solving problems. A valid forklift operator's license. Benefits that make life better: Comprehensive Healthcare 401(k) with 100% company match; up to 5% vested Paid Time Off starting on day one Bonus opportunities Health- & Dependent Care Flexible Spending Accounts Short- & Long-Term Disability Life & AD&D Insurance Learning & Training opportunities

Best Match

Industrial Carpenter/Multi Craft(Maintenance-No Per Diem)

Brown & Root Industrial Services North Kansas City, MO

Job Summary: The Plant Infrastructure Worker is responsible for performing structural maintenance and construction tasks within the Kansas City plant facility. This includes work focused on carpentry , masonry , and scaffolding , supporting the safety, reliability, and functionality of the plant’s infrastructure. The role plays a key part in facility upkeep and contributes to infrastructure improvement projects. Key Responsibilities: Perform carpentry work including building, repairing, and modifying plant structures such as walls, doors, partitions, ceilings, and flooring. Erect, inspect, and safely dismantle scaffolding and work platforms in line with safety standards and operational needs. Carry out masonry tasks including brick and block work, concrete patching, grouting, and formwork for minor structural repairs. Use tools and equipment such as drills, saws, hammers, levels, mixers, and scaffolding systems safely and efficiently. Interpret and follow technical drawings, blueprints, and job instructions. Conduct inspections to identify structural issues or wear and perform repairs as needed. Maintain clean and safe work environments in compliance with plant safety standards. Collaborate with the Infrastructure Supervisor and maintenance team to support daily operations and improvement projects. Working Conditions: Based in an industrial plant environment in Kansas City. Exposure to noise, dust, and physical labor; use of construction materials and tools is required. Regular physical activity including climbing ladders, standing for long periods, and working at elevated heights. May involve overtime, shift work, or emergency repairs as operational needs arise. Qualifications JOB REQUIREMENTS Work within precise limits or standards of accuracy. Apply shop mathematics to solve problems. Plan work and select proper tools. Compare and see differences in the size, shape and form of lines, figures and objects. Visualize objects in three dimensions from plans and drawings. Make decisions based on measurable criteria. Work at heights without fear. Qualifications High school diploma or equivalent required; vocational training or certification in carpentry , masonry , or scaffolding preferred. Previous experience in infrastructure maintenance or construction within a plant, industrial, or commercial setting. Skilled in the use of hand and power tools related to carpentry and masonry. Working knowledge of scaffolding safety procedures and experience with scaffold setup and takedown. Ability to read and understand blueprints or technical diagrams. Physically capable of lifting, bending, climbing, and working at heights or in confined spaces. Valid driver’s license; certifications for working at heights or operating lift platforms are a plus. #J-18808-Ljbffr

Work Life Balance

Maintenance Technician

Advanced Technology Services North Kansas City, MO

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Our technicians are responsible for the following: Performs entry to mid-level break-fix & preventative maintenance. This includes but not limited to: adjusting functional parts of devices and control instruments to sustain and improve operations; repairing or replacing defective parts; reconditioning or repairing machine tools. Identifies needed parts, supplies, and repair items. Provides support and back up for other members of department as needed by leadership. Is aware of Maintenance Industry Standards. Assures compliance with 5S and housekeeping standards. Participates in CI activities - processes, results and cost savings. May be required to setup and operate simple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform basic welding tasks. Updates records and reviews CMMS history. Performs basic troubleshooting of control systems circuitry. Completes technical self-study programs for career development. Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: High School Graduate or equivalent (GED). Associates degree with a Technical focus or 18 months of related experience in general industry or successful completion of the ATS Technician Progression Program. Understanding of basic electrical and mechanical systems. Can perform repairs. Must be able to use basic hand tools. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí. #J-18808-Ljbffr

High salary

Maintenance Technician

Lincoln Military Housing North Kansas City, MO

Overview Founded in 1965 by Mack Pogue as Lincoln Property Company, Willow Bridge Property Company is one of the United States’ most respected full-service residential property companies, operating a successful portfolio in 75 markets. Headquartered in Dallas, Texas, Willow Bridge proudly employs over 5,500 team members, has built over 200,000 apartments and manages 220,000 units for its clients. To learn more, visit willowbridgepc.com. We create places people want to call home — starting with you. With decades of proven success, Willow Bridge is a national leader in residential property management and development, active in 29 states and managing more than 230,000 apartment homes across the U.S. At Willow Bridge, our purpose drives everything we do. Whether you’re launching your career or looking to take the next step, we’re here to support your growth with intention, flexibility, and real opportunities to make an impact. We’re currently hiring for a Maintenance Technician — someone who brings fresh thinking, follows through, and knows how to bring people together to get results. We value people who lead by listening, communicate with clarity, and take initiative to find better ways forward. If you're someone who believes in showing up with integrity, working collaboratively, and driving positive change, you’ll feel right at home here. Let’s grow together at Willow Bridge. Responsibilities The responsibilities of the Maintenance Technician are as follows: Troubleshoot and perform all necessary repairs to the apartment community, including plumbing, HVAC, carpentry and electrical. Installation of new appliances as needed. Ensure resident requested service orders are completed on a timely basis. Assist in maintaining the exterior of the property to provide clean and acceptable curb appeal at all times. Comply with all OSHA regulations and health, safety and environmental laws. Additional duties as assigned. Qualifications The qualifications of the Maintenance Technician are as follows: A minimum of 1 year of related experience. High school diploma or equivalent is required. Strong knowledge in troubleshooting and repairing HVAC systems. HVAC certification is strongly preferred. EPA Type I & II certification(s) preferred. Excellent verbal and written communication skills. Ability to multitask, stay organized and meet deadlines. Able to be on-call for responding to after-hours emergencies. Must be able to lift up to 50 lbs. This role MAY require a valid driver's license. Maintenance TechnicianBenefits Willow Bridge Property Company offers competitive pay, a benefits package that includes health, dental, vision and 401(k) and opportunities for career development and advancement. #J-18808-Ljbffr

Maintenance Manager

C.H. Guenther & Son North Kansas City, MO

Overview Directs maintenance crews in the installation, repair and preventive maintenance of equipment used throughout the plant, facilities, utilities, and powerhouse equipment. Oversees maintenance of processes in order to reduce mechanical downtime and keep product flows and production lines running at maximum efficiency. Responsibilities Leads teams of Maintenance Mechanics & Electricians in predictive & preventative maintenance and machine repair. Responsible for the development, implementation, and day to day supervision of maintenance systems, processes and documentation associated with efficient and High Performing Manufacturing Organizations (Prevention and Predictive Maintenance, TPM, SOP’s, Safety, etc.). Ensures maintenance is scheduled in a timely manner and works closely with Production to schedule and accomplish equipment and facility repairs. Develops and / or maintains Key Performance Indicators for tracking and reporting the performance of the maintenance function (supplier performance, 3rd party contractor performance, equipment reliability, overall equipment effectiveness, etc.). Provides long term solutions and day-to-day support to all operating teams having issues with troubleshooting, problem analysis, equipment failures, etc. Trains employees on proper work methods and safety procedures. Maintains accurate records of maintenance work performed and inventory. Provides regular status reports to maintenance management team. Reviews all planned job packages for labor requirements, materials, parts, methods, permits, and priorities. Distributes work orders directly to those assigned to perform the task. Evaluates all Emergency work identified to ensure an emergency response is necessary, or, directs the creation of a work order that can be planned and scheduled in the future. Ensures appropriate resources for each planned and scheduled job have the correct skill levels for proper work execution. Controls Job Execution. Directs trades in the performance of approved maintenance jobs. Controls quality, duration, cost and thoroughness of all work under their direct supervision. Monitors each job closely by frequently visiting jobs in progress to ensure job quality and progress. Interfaces with the Production Department on any changes in duration or any other conditions that impacts the schedule. In the absence of key personnel, the employee’s supervisor or qualified designee is responsible to complete or delegate the completion of all required tasks and responsibilities. Flexibility to work non-standard hours as needed, including evenings, weekends, and holidays. Performs all other duties as assigned. Minimum Job Requirements Education / Certifications and Experience Highschool diploma or GED, required. Bachelor's degree in Mechanical Engineering, Industrial Maintenance, or a related field, preferred. 3-5 years of maintenance supervisory experience in a manufacturing environment. Experience acting as a lead by providing training, coaching / mentoring to less experienced staff or through managing a process or project. Knowledge, Skills, and Abilities Proficient use of computer, Microsoft Office (Word, Excel, PowerPoint, OneNote), and other related applications or software. Advanced technical skills in ammonia refrigeration, high pressure boiler, compressed air, mechanical, and electrical fields (e.g. PLCs, instrumentation, mechanical engineering, etc.) and is able to lead resource planning efforts in a large manufacturing environment. Advance knowledge in PSM and RMP. Thorough knowledge of maintenance systems, work order processes, preventive / predictive maintenance, TPM, inventory and scheduling software. Strong leadership skills (conflict resolution, facilitation, change management skills, decision making, empowerment and delegation), preferred. Able to lead problem solving and troubleshooting efforts associated with high-level process issues. Good planning and priority setting skills. Ability to work well with others in fast paced, dynamic environment. Bilingual is a plus. Supervisory Responsibilities Work requires supervising and monitoring performance for a regular group of employees or a work unit, including providing input on hiring / disciplinary actions and work objectives / effectiveness, and realigning work as needed. Provides leadership and guidance to employees in the Maintenance Department. Carries out supervisory responsibilities in accordance with the organization's policies and procedures. Work requires supervising and monitoring performance for a regular group of employees or a work unit, including providing input on hiring / disciplinary and work objectives / effectiveness, and realigning work as needed. Working Conditions and Physical Effort Work involves daily exposure to unusual elements such as dirt, dust, fumes, darkness and / or noise. Seasonal exposure to weather elements includes, but is not limited to, extreme temperatures, wetness, and humidity. Work environment involves daily exposure to physical risks such as working around mechanical equipment, forklifts, chemical hazards, and electrical hazards. Position requires the ability to sitting frequently at a desk, walking around the office and plant; carrying packages up to 50 pounds; utilizing fine dexterity; reaching and kneeling on a daily basis. Expectations Will demonstrate, promote, and exemplify the Company’s Core Values. At C.H. Guenther, we value transparency in compensation. By providing the salary range for this role, we aim to promote fairness and help candidates make informed choices about their career. The salary range for this role is : $86,855.00 - $159,414.00 This is not a guarantee of compensation or salary, as the final offer amount may vary based on factors including job-related knowledge, skills, and experience, along with geographic location. C.H. Guenther is proud to offer competitive compensation and benefit programs that include medical, dental, vision, flexible savings account, health savings account, 401K matching savings plan, employee assistance program, wellness programs, life insurance, AD&D insurance, disability insurance, tuition reimbursement, student loan counseling, employee referral program, paid time off, and more! C.H. Guenther & Son and its subsidiaries are E-Verify participating employers. All offers of employment are contingent upon successful completion of the pre-employment screening process which includes a drug screen and review of criminal background and other records as required. AA / EEO / Drug-Free Employer #J-18808-Ljbffr

Maintenance Technician

Advanced Technology Services (ATS) North Kansas City, MO

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, Mexico y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fabricas funcionen mejor. Principal Duties/Responsibilities: Performs entry to mid-level break-fix & preventative maintenance. This includes but not limited to: adjusting functional parts of devices and control instruments to sustain and improve operations; repairing or replacing defective parts; reconditioning or repairing machine tools. Identifies needed parts, supplies, and repair items. Provides support and back up for other members of department as needed by leadership. Is aware of Maintenance Industry Standards. Assures compliance with 5S and housekeeping standards. Participates in CI activities - processes, results and cost savings. May be required to setup and operate simple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform basic welding tasks. Updates records and reviews CMMS history. Performs basic troubleshooting of control systems circuitry. Completes technical self-study programs for career development. Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: High School Graduate or equivalent (GED). Associates degree with a Technical focus or 18 months of related experience in general industry or successful completion of the ATS Technician Progression Program. Understanding of basic electrical and mechanical systems. Can perform repairs. Must be able to use basic hand tools. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religion, sexo (incluido el embarazo, identidad de genero y orientacion sexual), origen nacional, discapacidad, estatus de veterano, informacion genetica u otro estatus legalmente protegido. Revision de la politica de privacidad aqui here. #J-18808-Ljbffr

Clerk, Shipping & Receiving

StandardAero North Kansas City, MO

Visually inspects all incoming products for compliance to the purchase order received with the shipment in accordance with established policy and procedure. The inspection shall focus on the product's received condition including identification, configuration, completion, condition, quantity and appropriate certification. Responsibilities Verifies purchased products were obtained from an approved source as listed on the qualified vendor listing, and directs the product to the appropriate area for inspection. Identifies material requiring inspection using the check for acceptance (CFA) process in accordance with established policy and procedure. Researches and reconciles discrepancies noted during the cycle count process; completes discrepancy reports and performs computer system data entry from receiving documentation in accordance with established policy and procedure. Segregates non-conforming material from accepted material to prevent inadvertent use. Communicates non‑conformities found with the appropriate department. Cleans incoming trays and moves parts from gateway to engine trays. Moving of aircraft engines, engine containers, materials transport containers and facility maintenance equipment with forklifts between plants. Organizing engine container yards for cleanliness and orderliness. Preparation of aircraft engine containers for shipment. Installing aircraft engines into transport containers. Operates a forklift truck within all safety guidelines; fuels vehicle when needed and notifies supervisor when problems are encountered with its operation. Conducts an inventory of engine parts located on the engine trays to determine part requirements for build kit completion. Liaises with production planners to locate parts, expedite work, and/or obtain estimated completion dates. Logs received and shipped items into production management receiving system to maintain lot control registry. Provides materials, components and engines in a timely manner by physically moving them from stock points either manually or by way of material handling equipment (i.e., forklift, pallet jack, etc.). Uses the production management computer system to dispense and receive information such as receipts, transfers, returns, cycle counts, product codes, part numbers, quantities, comments, outstanding demands, non-conformance tags, etc. Stocks consumables and parts on warehouse shelving. Arranges parts/components into kits as per original equipment manufacturer parts manuals. Prepares and completes a variety of documentation required for credit and export compliance, vendor returns, picking and shipping of parts, service center transfer shipments, etc. Controls data integrity of inventory systems by creating and updating system files. Relocation Provided: No As a Shipping Clerk , you'll have responsibility in ensuring incoming materials are routed properly and our finished product is sent back to our customers in a timely manner. What you'll do: Reconcile incoming BOL. Check for damage and create a damage report. Verify customer's paperwork for shipping and raise a discrepancy if not accurate. Place applicable paperwork and ship label on box. After a brief handoff to the induction team, verify routing information and move the parts to the appropriate cell. Once parts have been repaired move them back to shipping/receiving. Verify part numbers and create initial shipping paperwork. Use best practices to pack materials for shipment back to customer. Work with the StandardAero Customer Service team to understand shipping instructions and create labels. Finalize shipment. Position Requirements: Experience working in a warehouse environment in shipping/receiving Ability to lift up to 50 pounds for approximately 25% of the average workday. Ability to walk and stand for long periods Preferred Characteristics: Experience with FedEx Ship Manager, UPS OneWorld, DHL, and similar systems. Well organized with attention to detail. Strong interpersonal skills. Ability to think outside the box when solving problems. A valid forklift operator's license. Benefits that make life better: Comprehensive Healthcare 401(k) with 100% company match; up to 5% vested Paid Time Off starting on day one Bonus opportunitiesHealth- & Dependent Care Flexible Spending Accounts Short- & Long-Term Disability Life & AD&D Insurance Learning & Training opportunities #J-18808-Ljbffr

Clerk, Shipping & Receiving

Standard Aero North Kansas City, MO

Visually inspects all incoming products for compliance to the purchase order received with the shipment in accordance with established policy and procedure. The inspection shall focus on the product's received condition including identification, configuration, completion, condition, quantity and appropriate certification. Responsibilities Verifies purchased products were obtained from an approved source as listed on the qualified vendor listing, and directs the product to the appropriate area for inspection. Identifies material requiring inspection using the check for acceptance (CFA) process in accordance with established policy and procedure. Researches and reconciles discrepancies noted during the cycle count process; completes discrepancy reports and performs computer system data entry from receiving documentation in accordance with established policy and procedure. Segregates non-conforming material from accepted material to prevent inadvertent use. Communicates non‑conformities found with the appropriate department. Cleans incoming trays and moves parts from gateway to engine trays. Moving of aircraft engines, engine containers, materials transport containers and facility maintenance equipment with forklifts between plants. Organizing engine container yards for cleanliness and orderliness. Preparation of aircraft engine containers for shipment. Installing aircraft engines into transport containers. Operates a forklift truck within all safety guidelines; fuels vehicle when needed and notifies supervisor when problems are encountered with its operation. Conducts an inventory of engine parts located on the engine trays to determine part requirements for build kit completion. Liaises with production planners to locate parts, expedite work, and/or obtain estimated completion dates. Logs received and shipped items into production management receiving system to maintain lot control registry. Provides materials, components and engines in a timely manner by physically moving them from stock points either manually or by way of material handling equipment (i.e., forklift, pallet jack, etc.). Uses the production management computer system to dispense and receive information such as receipts, transfers, returns, cycle counts, product codes, part numbers, quantities, comments, outstanding demands, non-conformance tags, etc. Stocks consumables and parts on warehouse shelving. Arranges parts/components into kits as per original equipment manufacturer parts manuals. Prepares and completes a variety of documentation required for credit and export compliance, vendor returns, picking and shipping of parts, service center transfer shipments, etc. Controls data integrity of inventory systems by creating and updating system files. Relocation Provided: No As a Shipping Clerk , you'll have responsibility in ensuring incoming materials are routed properly and our finished product is sent back to our customers in a timely manner. What you'll do: Reconcile incoming BOL. Check for damage and create a damage report. Verify customer's paperwork for shipping and raise a discrepancy if not accurate. Place applicable paperwork and ship label on box. After a brief handoff to the induction team, verify routing information and move the parts to the appropriate cell. Once parts have been repaired move them back to shipping/receiving. Verify part numbers and create initial shipping paperwork. Use best practices to pack materials for shipment back to customer. Work with the StandardAero Customer Service team to understand shipping instructions and create labels. Finalize shipment. Position Requirements: Experience working in a warehouse environment in shipping/receiving Ability to lift up to 50 pounds for approximately 25% of the average workday. Ability to walk and stand for long periods Preferred Characteristics: Experience with FedEx Ship Manager, UPS OneWorld, DHL, and similar systems. Well organized with attention to detail. Strong interpersonal skills. Ability to think outside the box when solving problems. A valid forklift operator's license. Benefits that make life better: Comprehensive Healthcare 401(k) with 100% company match; up to 5% vested Paid Time Off starting on day one Bonus opportunitiesHealth- & Dependent Care Flexible Spending Accounts Short- & Long-Term Disability Life & AD&D Insurance Learning & Training opportunities #J-18808-Ljbffr

Industrial Pipefitter(Maintenance-No per diem)

Brown & Root Industrial Services North Kansas City, MO

Overview SUMMARY Journeyman - Typically 3 years and above documented field experience in chosen craft discipline with ability to read and interpret instructions and document, plan and perform work activities independently. Lays out, fabricates, assembles, installs and maintains piping systems, pipe supports, fixtures, and related hydraulic and pneumatic equipment for steam, hot water fixtures and equipment for steam, hot water, heating, cooling, lubricating, sprinkling and production and processing systems. Responsibilities Selects type and size of pipe and related materials and equipment, such as supports, hangers, and hydraulic cylinders, according to job specifications. Inspects worksite to determine presence of obstructions. Plans sequence on installation to avoid obstructions and activities of other workers. Cuts pipe using hacksaw, pipe cutter, hammer and chisel, cutting torch and pipe cutting machine. Threads pipe using threading machine. Bends pipe by hand or with pipe-bending tools and machine. Mounts pipe hangers and brackets on walls and ceiling to hold pipe. Assembles and installs a variety of metal or nonmetal pipes and pipe fittings, using threaded caulked, soldering, brazing, fused, or cemented joints, and hand tools. Secures pipes to structure with bracket, clamps, and hangers, using hand and power tools. Installs and maintains refrigeration and air conditioning systems, including compressors, pumps, meter, pneumatic and hydraulic controls and piping. Test piping systems for leaks by increasing pressure in pipes and observing gauges attached to pipes for indication of leaks. Welds pipe supports to structural steel members. May observe production machines in assigned area of manufacturing facility to detect machinery malfunctions. May operate machinery to verify repair. Loads, transports and unloads material, tools, equipment and supplies. May assist in lifting, positioning and securing of material and work pieces during installation. Performs minor maintenance or cleaning activities of tools and equipment. Respiratory protection is common and may be required. Responsible for observing and complying with all safety and project rules. Perform other duties as required. Qualifications JOB REQUIREMENTS: Work within precise limits or standards of accuracy. Make decisions based on measurable criteria. Apply shop mathematics to solve problems Plan work and select proper tools. Visualize objects in three dimensions from plans and drawings. Work at heights without fear. Compare and see differences in the size, shape and form of lines, figures and objects. Additional Qualifications QUALIFICATIONS: May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. Physical Requirements Strength: Standing 60%; Walking 20%; Sitting 20%. Lifting 50 lb.; Carrying 50 lb.; Pushing 70 ft-lb.; Pulling 70 ft-lb. Climbing: Frequently (F) or Occasionally (O) as applicable. Balancing: F Stooping: O; Kneeling: O; Crouching: O; Crawling: O; Reaching: C; Handling: C; Fingering: F Symbols Explanation EXPLANATION OF SYMBOLS NP Not Present, O Occasionally (0-33%), F Frequently (34-66%), C Constantly (67-100%) Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development. #J-18808-Ljbffr

Combination Welder(Maintenance-No Per Diem)

Brown & Root Industrial Services North Kansas City, MO

Overview SUMMARY Combination - Capable of certifying on multi-process pipe being proficient in SMAW, GTAW and GMAW welding processes. May require x-ray qualities. Lays out, aligns and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy. Responsibilities Selects type and size of pipe or other related materials and equipment according to specifications. Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques. May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded Metal Arc welding processes. Lays out, positions, aligns and fits components together in various body positions. Bolts, clamps and welds together metal components of products such as piping systems, plate, pipe and tube or structural shapes, using arc and arc gas welding equipment. May weld in flat, horizontal, vertical, or overhead position. May tack weld assemblies together. Connects cable from welding unit to obtain amperage, voltage, slope and pulse as specified by procedure or supervisor. Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun. Starts power supply to produce electric current. Strikes arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work piece. Manually guides electrode or gun along weld-line, maintaining length of arc and speed and movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle. May manually apply filler rod to supply weld metal. May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. May repair broken or cracked parts and fill holes. May remove excess weld, defective weld material, slag and spatter, using carbon arc gouge, hand scrapper, grinder or power chipper. May preheat work piece, using hand torch or heating furnace. May cut metal plates or structural shapes. Examines weld for bead size and other specifications. Loads, transports and unloads material, tools, equipment and supplies. May assist in lifting, positioning and securing of materials and work pieces during installation. Performs minor maintenance or cleaning activities of tools and equipment. Assists other mechanics as needed. Respiratory protection is common and may be required. Required to pass employer performance tests or standard tests to meet certification standards. Performs only procedures certified in. Responsible for observing and complying with all safety and project rules. Performs other duties as required. Qualifications JOB REQUIREMENTS Work within precise limits or standards of accuracy. Make decisions based on measurable criteria. Apply basic mathematics to solve problems. Plan work and select proper tools. Visualize objects in three dimensions from plans and drawings. Compare and see differences in the size, shape and form of lines, figures and objects. QUALIFICATIONS May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. Physical Requirements 1. Strength: a. Standing 50% Walking 20% Sitting 30% b. Lifting 35 lb. Carrying 35 lb. Pushing 0 ft-lb. Pulling 0 ft-lb. 2. Climbing O Balancing O 3. Stooping O Kneeling O Crouching O Crawling O Reaching C Handling C Fingering C Explanation of Symbols NP Not Present O Occasionally (0-33%) F Frequently (34-66%) C Constantly (67-100%) Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. Benefits: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development. #J-18808-Ljbffr

Clerk, Stockroom

StandardAero North Kansas City, MO

Build an Aviation Career You're Proud Of Build your career with integrity by working at a company that doesn't just treat you like a number. You'll get the tools to do things right in a clean and safe work environment and the trust to fix any issue that comes your way. Our on-the-job training and team of experts mean you'll be set up for success. As a Stockroom Clerk , you'll be responsible for managing the day-to-day activities of the stockroom area. You will be responsible for the overall operations and processes, and for coordinating efforts between all departments. Accuracy meeting strict deadlines is of high urgency. What you'll do: Performing incoming receiving inspections in accordance with Quality procedures. Receiving parts and material into applicable inventories. Issuing parts and materials to work orders per reservations or requests, issuing parts to sales orders. Processing incoming and outgoing piece parts per the applicable DWI's (Detailed Work Instruction). Operating the forklift to receive deliveries or send shipments. Processing rework parts Completing inventory audits and investigating discrepancies. Submit audits to the supervisor for approval. General administrative tasks and duties to ensure department efficiencies. Housekeeping, all responsible areas to be kept clean and tidy. Develop and manage Continuous Improvement initiatives in your assigned area. Position Requirements High School Diploma or equivalent Experience in the field of logistics, shipping, warehouse or transportation Forklift certification or ability to obtain one Highly organized with the ability to multi-task Demonstrated experience working with minimal supervision or direction Preferred: Oracle and SAP experience Dedicated commitment to providing superior, timely internal and external customer service Strong problem solving, reasoning and decision making skills in a team environment High attention to detail with good computer skills. Desire to grow, learn and work in a team environment A keen focus on health and safety, productivity & throughput, quality and continuous improvement. Benefits that make life better: Comprehensive Healthcare Company pension plan with 100% company match; up to 5% vested Paid Time Off starting on day one Bonus opportunities Short- & Long-Term Disability Life & AD&D Insurance Learning & Training opportunities #LI-SC1

Clerk Stockroom

StandardAero North Kansas City, MO

JOB DESCRIPTION Build an Aviation Career You’re Proud Of Build your career with integrity by working at a company that doesn’t just treat you like a number. You’ll get the tools to do things right in a clean and safe work environment and the trust to fix any issue that comes your way. Our on-the-job training and team of experts mean you’ll be set up for success. As a Stockroom Clerk , you’ll be responsible for managing the day-to-day activities of the stockroom area. You will be responsible for the overall operations and processes, and for coordinating efforts between all departments. Accuracy meeting strict deadlines is of high urgency. What you’ll do: Performing incoming receiving inspections in accordance with Quality procedures. Receiving parts and material into applicable inventories. Issuing parts and materials to work orders per reservations or requests, issuing parts to sales orders. Processing incoming and outgoing piece parts per the applicable DWI’s (Detailed Work Instruction). Operating the forklift to receive deliveries or send shipments. Processing rework parts Completing inventory audits and investigating discrepancies. Submit audits to the supervisor for approval. General administrative tasks and duties to ensure department efficiencies. Housekeeping, all responsible areas to be kept clean and tidy. Develop and manage Continuous Improvement initiatives in your assigned area. Position Requirements High School Diploma or equivalent Experience in the field of logistics, shipping, warehouse or transportation Forklift certification or ability to obtain would be an asset Desired Skills: Highly organized with the ability to multi-task Demonstrated experience working with minimal supervision or direction Dedicated commitment to providing superior, timely internal and external customer service Strong problem solving, reasoning and decision making skills in a team environment High attention to detail with good computer skills. Desire to grow, learn and work in a team environment A keen focus on health and safety, productivity & throughput, quality and continuous improvement. Benefits that make life better: Comprehensive Healthcare Company pension plan with 100% company match; up to 5% vested Paid Time Off starting on day one Bonus opportunities Short- & Long-Term Disability Life & AD&D Insurance Learning & Training opportunities

Quick Apply

Maintenance Technician

Advanced Technology Services (ATS) North Kansas City, MO

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, Mexico y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fabricas funcionen mejor. Principal Duties/Responsibilities: * Performs entry to mid-level break-fix & preventative maintenance. This includes but not limited to: adjusting functional parts of devices and control instruments to sustain and improve operations; repairing or replacing defective parts; reconditioning or repairing machine tools. * Identifies needed parts, supplies, and repair items. * Provides support and back up for other members of department as needed by leadership. * Is aware of Maintenance Industry Standards. * Assures compliance with 5S and housekeeping standards. * Participates in CI activities - processes, results and cost savings. * May be required to setup and operate simple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform basic welding tasks. * Updates records and reviews CMMS history. * Performs basic troubleshooting of control systems circuitry. * Completes technical self-study programs for career development. * Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: * High School Graduate or equivalent (GED). * Associates degree with a Technical focus or 18 months of related experience in general industry or successful completion of the ATS Technician Progression Program. * Understanding of basic electrical and mechanical systems. Can perform repairs. * Must be able to use basic hand tools. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religion, sexo (incluido el embarazo, identidad de genero y orientacion sexual), origen nacional, discapacidad, estatus de veterano, informacion genetica u otro estatus legalmente protegido. Revision de la politica de privacidad aqui here.

Maintenance Technician Pumps Rotating Equipment

Jarbo North Kansas City, MO

Join our team as a Maintenance Technician! Repair and service pumps & rotating equipment for water/wastewater systems. Competitive pay, overtime, and growth in a stable, essential industry." Full-Time | Competitive Pay | Overtime Available | Paid Training & Growth We are hiring a Maintenance Technician / Shop Service Technician to service and repair pumps and rotating equipment used in the water and wastewater industry . If you have electro-mechanical troubleshooting skills and take pride in quality work, we want to hear from you. Key Responsibilities - Maintenance Technician (Pumps & Rotating Equipment) Inspect, troubleshoot, repair, and maintain submersible pumps , motors, and rotating equipment. Perform both mechanical and electrical diagnostics and repairs. Accurately document parts used, labor hours, and work performed. Follow all company safety policies and procedures . Work independently and in teams to meet tight deadlines. Requirements - Maintenance Technician (Pumps & Rotating Equipment) High school diploma or GED. Proven electro-mechanical repair skills. Ability to lift and maneuver heavy tools and equipment. Strong communication and organization skills. Flexible to work overtime when needed. Basic computer skills. Preferred - Maintenance Technician (Pumps & Rotating Equipment) Experience in submersible pump repair or other water/wastewater rotating equipment. Technical/vocational school training in mechanics or electronics. What We Offer to Maintenance Technician (Pumps & Rotating Equipment) Opportunity to become an employee owner. Competitive hourly pay + overtime. Comprehensive benefits, inclusive of health insurance, medical insurance, dental, insurance, Paid-time off (PTO), holiday pay, 401k with matching. Career advancement in a high-demand industry. Hands-on technical training and development. Supportive, safety-focused work environment. Maintenance Technician, Pump Repair, Rotating Equipment Technician, Industrial Maintenance, Electro-Mechanical Technician, Submersible Pump Repair, Water Industry Maintenance, Wastewater Technician, Equipment Mechanic, Pump Service Jobs. \#IND1

Maintenance Planner/Scheduler in North Kansas City

Energy Jobline ZR North Kansas City, MO

Energy Jobline is the largest and fastest growing global Energy Job Board and Energy Hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide. We focus on the Oil & Gas, Renewables, Engineering, Power, and Nuclear markets as well as emerging technologies in EV, Battery, and Fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers. Job DescriptionJob DescriptionFounded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better.Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Evaluates non-emergency work requests, develops scope of work, and inspects job location to determine job requirements. · Estimates labor hours, skillsets, parts, materials, equipment and special tools required to complete proactive jobs in a safe and efficient manner. · Gathers relevant technical documentation such as drawings, schematics, specifications, spare parts lists from equipment histories, OEM manuals and the Knowledgebase system. Verifies the availability of parts prior to scheduling the job. Arrange for special tools and auxiliary equipment when required. · Maintains an organized and prioritized work order backlog to determine the next highest priority jobs to be planned next and maintains the Ready Backlog at or above 80%. · Employs the continuous improvement process to update Job Plans for accuracy and effectiveness. · Conducts weekly planning & scheduling meetings with Production to determine work order priorities, communicate work order status and alter planned maintenance activities if necessary. · Creates a Weekly Technician Schedule that includes priority planned jobs and preventative maintenance tasks that utilize 100% of the available technician labor hours. · Improves work order planning and scheduling effectiveness through the review process and use of the maintenance metrics. · Maintains records and files essential to meaningful analysis and reporting of maintenance related matters. · Trains site employees on CMMS and ensures that it is working with integrity and is being utilized. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · Associate Degree required in a technical field with 1-3 years of maintenance scheduling / planning experience and/or 5 – 10 years as a machine repair technician, or equivalent combination of both · Familiar with industrial manufacturing environment · Electrical/mechanical aptitude · Proficiency with computers, maintenance systems, and applications including Microsoft Office · Excellent verbal communication, facilitation, and presentation skills · Ability to build and maintain positive, professional relationships Desirable KSAs: · Desire to develop leadership attributes · Experience in job plan development, job scheduling, and work execution · Project management and capital project experience · CMRP certification · Green Belt certification · STS certification Competencies: · Drive & Motivation · Interpersonal Skills · Task Management · Strategic Skills · Customer Focus Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, , , , (including , , and ), , , veteran status, genetic information, or other legally protected status. Review the privacy policy here.ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, , raza, religión, sexo (incluido el embarazo, identidad de género y orientación ), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here. If you are interested in applying for this job please press the Apply Button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.

Work Life Balance

Maintenance Technician

Advanced Technology Services North Kansas City, MO

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs entry to mid-level break-fix & preventative maintenance. This includes but not limited to: adjusting functional parts of devices and control instruments to sustain and improve operations; repairing or replacing defective parts; reconditioning or repairing machine tools. · Identifies needed parts, supplies, and repair items. · Provides support and back up for other members of department as needed by leadership. · Is aware of Maintenance Industry Standards. · Assures compliance with 5S and housekeeping standards. · Participates in CI activities - processes, results and cost savings. · May be required to setup and operate simple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform basic welding tasks. · Updates records and reviews CMMS history. · Performs basic troubleshooting of control systems circuitry. · Completes technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus or 18 months of related experience in general industry or successful completion of the ATS Technician Progression Program. · Understanding of basic electrical and mechanical systems. Can perform repairs. · Must be able to use basic hand tools. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Industrial Pipefitter(Maintenance-No per diem)

Brown & Root Industrial Services North Kansas City, MO

Brown & Root Industrial Services - JobID: 5001155855100 [Maintenance Mechanic] As a Pipefitter at Brown & Root, you'll: Lay out, fabricate, assemble, install and maintain piping systems, pipe ..Hiring Immediately >>

Industrial Carpenter/Multi Craft(Maintenance-No Per Diem)

Brown & Root Industrial Services North Kansas City, MO

Brown & Root Industrial Services - JobID: 5001161639300 [Maintenance Technician] As a Carpenter at Brown & Root, you'll: Construct, fabricate, install and dismantle formwork of fixtures of metal, wood and other accessories; Build wooded structures, such as stairs, concrete forms, scaffolds, tunnel and sewer supports, and temporary frame shelters; Measure boards, timbers, or plywood using square, measuring tape and ruler and mark cutting lines on materials using pencil and scriber; Use carpentry hand tools such as hammers, levels, squares, screw drivers, adjustable, wrenches, hand and power saws, drill motors and pry bars...Hiring Immediately >>

Posted 16 hours ago

Quick Apply

Maintenance Technician

Advanced Technology Services North Kansas City, MO

Job Description Job Description Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better.Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs entry to mid-level break-fix & preventative maintenance. This includes but not limited to: adjusting functional parts of devices and control instruments to sustain and improve operations; repairing or replacing defective parts; reconditioning or repairing machine tools. · Identifies needed parts, supplies, and repair items. · Provides support and back up for other members of department as needed by leadership. · Is aware of Maintenance Industry Standards. · Assures compliance with 5S and housekeeping standards. · Participates in CI activities - processes, results and cost savings. · May be required to setup and operate simple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform basic welding tasks. · Updates records and reviews CMMS history. · Performs basic troubleshooting of control systems circuitry. · Completes technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus or 18 months of related experience in general industry or successful completion of the ATS Technician Progression Program. · Understanding of basic electrical and mechanical systems. Can perform repairs. · Must be able to use basic hand tools. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Clerk, Stockroom

Standard Aero North Kansas City, MO

Overview Build an Aviation Career You're Proud Of Build your career with integrity by working at a company that doesn't just treat you like a number. You'll get the tools to do things right in a clean and safe work environment and the trust to fix any issue that comes your way. Our on-the-job training and team of experts mean you'll be set up for success. Responsibilities What you'll do: Performing incoming receiving inspections in accordance with Quality procedures. Receiving parts and material into applicable inventories. Issuing parts and materials to work orders per reservations or requests, issuing parts to sales orders. Processing incoming and outgoing piece parts per the applicable DWI's (Detailed Work Instruction). Operating the forklift to receive deliveries or send shipments. Processing rework parts Completing inventory audits and investigating discrepancies. Submit audits to the supervisor for approval. General administrative tasks and duties to ensure department efficiencies. Housekeeping, all responsible areas to be kept clean and tidy. Develop and manage Continuous Improvement initiatives in your assigned area. Position Requirements High School Diploma or equivalent Experience in the field of logistics, shipping, warehouse or transportation Forklift certification or ability to obtain one Highly organized with the ability to multi-task Demonstrated experience working with minimal supervision or direction Preferred Oracle and SAP experience Dedicated commitment to providing superior, timely internal and external customer service Strong problem solving, reasoning and decision making skills in a team environment High attention to detail with good computer skills. Desire to grow, learn and work in a team environment A keen focus on health and safety, productivity & throughput, quality and continuous improvement. Benefits Comprehensive Healthcare Company pension plan with 100% company match; up to 5% vested Paid Time Off starting on day one Bonus opportunities Short- & Long-Term Disability Life & AD&D Insurance Learning & Training opportunities #J-18808-Ljbffr