Machine Operator Jobs in Randolph, New Jersey

Work Life Balance

Driver / Operator

Moran Environmental Randolph, MA

Job Title: Vacuum Truck Operator Department: Operations Reports To: Logistics Manager JOB SUMMARY The Vacuum Truck Operator must be able to work in compliance in the delivery of MER's four core service lines (Emergency Response, Industrial and Marine Services, Facility Decontamination, and Site Remediation). Drivers must adhere to and maintain strict compliance with corporate/office policies and procedures, established health and safety protocols, and all applicable local, state, and federal regulations. JOB RESPONSIBILITIES Execution of field work encompassed in remediation and industrial maintenance projects while under direct or indirect supervision. Drive an average of 30% of the time as well as work onsite as part of a team. Depending on location, drivers may be asked to perform the duties of a Field Technician if business needs warrant it. Correct completion of all job-specific, employee-related and equipment-related MER paperwork including Timesheets, Daily Work Reports, Driver's Logs, Pre and Post Vehicle Inspection and Daily Tailgate Safety Meeting Forms. Understand and enforce project's detailed scope-of-work to maintain strict compliance with contract documents, project schedules, and corporate policies and procedures. Work safely during all phases of performing the job duties required in the field. Ability to perform work inside areas of varying dimensions, involving squatting and crawling for possible extended periods. Ability to follow directions; read/speak and understand English; read and understand common danger placards / labels and hazardous warning literature including site safety plans. The ability to safely drive and perform safety checks on all vehicles for which licensed. Operate various vehicles safely, including but not limited to Vacuum Truck, Vacuum Trailer, Turbo-Vac, Roll-Off Truck and Hydro Vac. Project work may require out-of-town travel for two weeks or more Must be able to understand and comply with company and client safety standards. Due to the diversity of both scheduled and non-scheduled projects, physical demands, and environmental conditions vary significantly depending on the project. Work outside year-round in all types of weather. May work in environments that are extreme in nature like environmental conditions such as heat, cold, heights, hazardous chemicals, loud noises, dangerous equipment, long hours etc. May be exposed to varying levels of physical activities and physical extremes such as long periods of standing, walking, crouching, use of hands, and heavy lifting of up to 50 pounds or more. Must be clean shaven at all times to allow immediate donning and seal of respirator. QUALIFICATIONS Must be able to effectively operate a manual transmission. Requires High School Diploma or GED (or equivalent reading, writing and reasoning skills) and 2-3 years of experience operating vacuum trucks (or similar equipment). Additional experience in related work (emergency response, manual labor, general construction, industrial cleaning) is preferred. A valid Class "B" or "A" Commercial Driver's License with Hazmat and Tanker endorsements is required. TWIC Preferred. OSHA 40-HR HAZWOPER and Confined Space Entry certifications are required to complete within the first 30 days of employment. Successful completion of a pre-employment background and substance screening process including, but not limited to, employment verifications, criminal search and Motor Vehicle Record (MVR) search as well continued verifications throughout employment to ensure that all records meet company policy standards. BENEFITS Competitive Salary Health, Dental, and Vision Insurance 401k with Company Match Paid Time Off (PTO) Paid Holidays This is an hourly position; the hiring range for the Driver/Operator position in Randolph, MA is: $26.00/hour - $30.00/hour The actual hourly rate offered will be determined based on multiple factors including but not limited to relevant skills and experience. MER is committed to providing equal employment opportunities in a drug free work environment to all employees and applicants without regard to race, religion, color, sex, gender identity, sexual orientation, national origin, ancestry, citizenship status, uniform service member status, marital status, pregnancy, age, protected medical condition, genetic information, disability or any other protected status in accordance with all applicable federal, state and local laws. Moran Environmental Recovery is an Equal Opportunity Employer.

Work Life Balance

Forklift Operator

Express Employment Professionals Defunct Randolph, NJ

Job Full Description Job Title: Forklift Operator / Warehouse Associate Location: Randolph Employment Type: Full-Time Pay Rate: $19.00 - $22.00 per hour (based on experience) Reports To: Warehouse Manager / Operations Supervisor Position Summary We are looking for a reliable and safety-minded Forklift Operator / Warehouse Associate to join our team. This role involves operating an order reach forklift to move large vaults, assisting with loading and unloading trucks, and supporting warehouse organization and operations. Candidates with moving or restoration experience are highly encouraged to apply, but training will be provided for the right individual. Key Responsibilities Operate order reach forklifts safely and efficiently to move and organize large vaults and materials. Load and unload trucks , ensuring proper handling and placement of all items. Travel or report to various locations to pick up restoration items as needed. Assist with warehouse organization, cleanliness, and inventory management . Follow all safety procedures and company protocols during warehouse and field operations. Collaborate with team members and supervisors to meet daily goals and schedules. Qualifications Forklift operation experience required (order reach forklift preferred). Moving or restoration industry experience a plus, but not required. Must be able to lift and move heavy materials safely. Strong attention to detail and commitment to safety. Reliable, punctual, and able to work both independently and as part of a team. Valid driver's license and clean driving record (for field pickups). Compensation & Benefits Hourly pay: $19.00 - $22.00 , depending on experience. Opportunities for overtime and career growth . Supportive team environment with potential for long-term advancement. Parsippany, NJ 1304 140 Littleton Road Suite 110 Parsippany, NJ 07054

Quick Apply

Machine Operator I

Neogen Corporation Town of Randolph, WI

Machine Operator I Join to apply for the Machine Operator I role at Neogen Corporation. Location: Randolph, Wisconsin. About Neogen From farm to fork, we offer solutions to enhance the quality, quantity and safety of the global food supply. Our animal safety solutions are used on farms, veterinary practices and manufacturers worldwide to provide excellent animal care. Neogen’s culture combines stability with a deep belief in professional and personal growth, guided by our Pillars of Trust —Openness, Honesty, Credibility, Respect, and Service. Position Overview NEOGEN is looking for a Machine Operator to join our Randolph, Wisconsin team. Our Machine Operators work with Formulators, Manufacturing Supervisors, and Packaging Techs to maximize production output. Responsibilities Set up, run a line from start to finish, and shut down machines according to standard operating procedures (SOP) for each product run and daily production schedules. Consistently produce high‑quality products safely and efficiently that meet product specifications and labor standards. Maintain accurate documentation and quality checks. Maintain cleanliness and organization of work areas using 6S lean processes. Operate material handling equipment including forklifts, pallet jacks, and barrel handlers. Identify areas to improve safety, efficiency, and ergonomics. Assist with maintaining organization of the warehouse, including inventory control with RF guns and counts. Comply with all safety and environmental health requirements and strictly adhere to required PPE. Label and palletize manufactured products according to standardized pallet patterns. Assist in setting up production lines and moving production equipment as necessary. Other duties as assigned. Requirements Stamina to work 12‑hour shifts, 3.5 days per week, with overtime on Thursdays and/or Fridays. Reliability—report to work daily and on‑time for scheduled workdays and shift times. Ability to work with minimal supervision. Team‑oriented—committed to working and communicating in a team environment. Strong communication skills—speaking, reading, and writing in English, including legible writing. High school diploma, GED equivalent, or applicable experience in a manufacturing environment. Preference given to candidates with at least six months of experience working with packaging machinery in a food or feed manufacturing facility. Benefits and Compensation Competitive compensation starting at $21.00 per hour. Full benefit package: health, dental, vision, 401(k), short‑ and long‑term disability, paid time off and more. Opportunity for overtime. Career Information Seniority level: Entry level Employment type: Full‑time Job function: Management and Manufacturing #J-18808-Ljbffr

Sewing Machine Operator & Repair Specialist

LION Randolph, MA

Sewing Machine Operator & Repair Specialist Job Category : Operations Requisition Number : SEWIN001756 Apply now Full-Time On-site Locations Showing 1 location TotalCare Boston 33 Teed Dr Randolph, MA 02368, USA TotalCare Boston 33 Teed Dr Randolph, MA 02368, USA Looking for a job with a purpose? Want to make a real difference in the world? LION TotalCare is the leader in Firefighter PPE cleaning and repair maintenance. Our NFPA-certified services help enhance firefighter safety and save Fire Departments money by extending the life of their PPE. Join us to help protect our Firefighters! Benefits of Working with Us! Vision Care Benefits Life & Disability Insurance 401K Plan Education Reimbursement Program Company Events and More! LION is an international company that operates in three markets: the emergency services, military and civilian agency uniforms, and personal equipment markets. LION serves a global customer base of fire departments, military installations, institutions, corporate organizations, and training companies from multiple offices around the world. JOB SUMMARY – Sewing Machine Operator & Repair Specialist As a Sewing Machine Operator & Repair Specialist, you will be performing repairs to firefighter gear to meet our customer specifications and expectations. You will ensure high levels of customer satisfaction, efficient service delivery, and maintain high-quality standards. You can help save lives. Location: 40 B Teed Drive, Randolph, MA, 02368 Hours: Monday to Friday – 7:00 am – 3:30 pm Reports to: TotalCare Center Manager ESSENTIAL FUNCTIONS: Operate a sewing machine. Single, double, or multi-needle serger. Sew repairs to gear in accordance with company best practices. Prepare machine by changing needles and thread, and oiling and changing bobbin. Mount sewing machine attachments like needles, threads, pattern plates, and adjust machine guides according to repair needs. Meet delivery deadlines by working with the team to ensure firefighter gear is repaired on time and meets our high quality standards. Maintain cleanliness and good housekeeping in sewing area. Other duties as needed. ADDITIONAL RESPONSIBILITIES: Works well with other production associates. Must be able to follow instructions consistently with minimum supervision. Must be able to sew and follow sewing standards. Maintain a clean and safe work environment. Must follow company rules and regulations. Ability to multi-task. EDUCATION & EXPERIENCE QUALIFICATIONS: 1+ years of work experience with industrial sewing equipment. Basic knowledge of sewing principles and garment construction. Positive attitude and demonstrated ability to work well with a team. Strong problem-solving skills. Self-motivated and organized. Ability to work in a fast-paced, time-sensitive environment and to meet all deadlines. PHYSICAL REQUIREMENTS: Standing, sitting, walking, bending as needed. Using proper lifting technique may be required to lift objects up to 30 lbs. Qualifications Skills Behaviors : Motivations : Education Experience Licenses & Certifications Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws.For further information, please review the Know Your Rights notice from the Department of Labor. #J-18808-Ljbffr

Lift Operator

Sugarbush Resort Randolph, VT

Seasonal (Seasonal) RESORT OVERVIEW: Sugarbush Resort is a year-round destination offering some of the best skiing and riding in the east, an award-winning ski school, mountain biking, golf, disc golf, an array of dining venues, and a fully appointed Health and Recreation Center. Do you want to join an all-star team dedicated to delivering an unparalleled guest experience? Make this your best season yet by joining the team at Sugarbush and taking advantage of everything Vermont has to offer. BESIDES GETTING PAID TO WORK AT AN INCREDIBLE RESORT, WHAT'S IN IT FOR YOU?: Our investment in each employee includes a comprehensive wellness initiative, unwavering commitment to safety, growth opportunities, and a wide variety of resort benefits. Employees get to take advantage of our 4000+ acre playground including skiing, golf, mountain activities, health club membership, resort discounts, and more, so it's easy to share your enthusiasm for Sugarbush with our guests. POSITION SUMMARY: Join the Sugarbush Lift Operations team this winter! Lift Operators provide exceptional guest service and are responsible for the safety of our guests while they are loading, riding, and unloading our chairlifts. We are hiring full and part time winter seasonal positions with holiday and weekend availability preferred. This job pays $18-$19.50 per hour depending on experience. RESPONSIBILITIES: Operate chair lift and help guests getting on/off the lift. Monitor the operation of the lift continually; notify appropriate personnel of any problems or unusual conditions. Perform necessary opening and closing procedures. Complete daily lift log information. Maintain lift area using shovels, rakes, etc. Visually inspect the area on a regular basis for safety hazards and appearance. Keep the skier traffic flowing smoothly and move/position gate corrals to keep guest lines orderly. Positively greet customers at the base of the lift and to monitor RFID passes. Help with training of new employees. Answer a variety of questions regarding the resort and ski conditions. Follow all safety guidelines as instructed. QUALIFICATIONS: Must be 18 years of age or older. High School Diploma or equivalent required. Must possess basic reading and writing skills and have excellent customer service skills. Must be able to work in an efficient and alert manner and strictly observe safety and operational procedures. Must be able to engage with customers in a courteous, efficient and friendly manner. Must be comfortable working for long periods of time in changing weather conditions; i.e., rain, snow, wind and/or cold. Must be able to work weekends and holidays. Must be comfortable standing for a full work shift. Sugarbush Resort is an Equal Opportunity Employer#J-18808-Ljbffr

High salary

CNC Router Operator

Fenton Mobility Town of Randolph, NY

4 days ago Be among the first 25 applicants Join a successful manufacturing team with opportunities for training and exposure to new technologies such as robotics and lasers. About Fenton Mobility Fenton Mobility is an industry leader in mobility innovation, designing and manufacturing safe, custom solutions for buses, vans, and public transit systems. From individual upfits to large-scale fleet projects, everything we build is crafted right here in our modern facility in Randolph, NY. When it comes to accessible transportation, we set the standard. Why You Should Apply to this CNC Router Role Small company with a national reputation and family-like atmosphere. Full-time, direct-hire first shift position. Comprehensive benefits including paid vacation, sick time, health insurance contributions, and 401(k) with company matching. Diverse tasks in CNC machining in a rapidly growing company. Salary $18 - $22 per hour depending on relevant experience What You'll Be Doing As CNC Operator Operating a CNC router machine for fabricating wood parts and other components. Monitoring and changing tooling as required. Measuring finished product and performing quality checks. Cross training in other manufacturing processes. About You Be able to do the job as described. At least 1 year of shop floor experience operating CNC machinery. Familiar with changing tooling. Capable of physical tasks such as bending, lifting, and carrying materials. Able to prioritize and to perform a variety of tasks. Apply today! This position requires a background check. Salary: $18.00 - $22.00 per hour Seniority Level Entry level Employment Type Full-time Job Function Management and Manufacturing Motor Vehicle Manufacturing Referrals increase your chances of interviewing at Fenton Mobility by 2x #J-18808-Ljbffr

CNC Router Operator

Fenton Mobility Products Inc Town of Randolph, NY

About Fenton Mobility Fenton Mobility is an industry leader in mobility innovation, designing and manufacturing safe, custom solutions for buses, vans, and public transit systems. From individual upfits to large-scale fleet projects, everything we build is crafted right here in our modern facility in Randolph, NY. When it comes to accessible transportation, we set the standard. Why You Should Apply to this CNC Router Role Small company with a national reputation and family-like atmosphere. Full-time, direct-hire first shift position. Comprehensive benefits including paid vacation, sick time, health insurance contributions, and 401(k) with company matching. Diverse tasks in CNC machining in a rapidly growing company. Salary $18 - $22 per hour depending on relevant experience What You\'ll Be Doing as CNC Operator Operating a CNC router machine for fabricating wood parts and other components. Monitoring and changing tooling as required. Measuring finished product and performing quality checks. Cross training in other manufacturing processes. About You Be able to do the job as described. At least 1 year of shop floor experience operating CNC machinery. Familiar with changing tooling. Capable of physical tasks such as bending, lifting, and carrying materials. Able to prioritize and to perform a variety of tasks. Apply today! This position requires a background check. #J-18808-Ljbffr

Foundry Operator 1st Shift

Hearth & Home Technologies Randolph, VT

Position at Hearth & Home Technologies, LLC Pay Range $19/hr - $21/hr Monday - Friday 5:30am - 2:00pm Help us build quality products that people love as a Foundry Operator in Randolph, Vermont at Hearth & Home Technologies. A career at Hearth & Home Technologies puts you in the position of working with the most popular brands in the industry and having an impact on a product that people love. As one of our four core business units, the Stoves Business Unit brings together top brands such as Harman, Vermont Castings, and Quadra-Fire, now united under one as Forge & Flame, alongside other stove brands. This unit focuses on delivering high-quality, reliable stove solutions, including wood, pellet, and gas models. Role Responsibilities Processing quality cast iron parts used to create Hearth & Home Technologies’ industry-leading fireplaces, stoves and hearth products. Minimizing bad parts by proper cleaning, identification, inspection, and repair of cosmetic flaws. Job Requirements Read and perform basic math functions to determine mold specifications, production counts, work-in-process, and product specifications Follow written and pictorial standard work instructions Communicate clearly and effectively with others Complete quality and safety checks Advanced skills include Operation of a variety of material handling equipment such as Bobcat, Forklift, Yard Truck, Sweeper Operation of overhead cranes and hoists to move material such as molten metal, slag and refractory containers, furnace components and other equipment weighing from 2 to 10 tons Benefits Starting Day 1 3 Weeks Paid Time Off (prorated based on start date) 10 Paid Holidays based on start date Work today, get paid today with access to your earnings each day 401kwith 6% company match Health Insurance including medical, dental, and vision Additional Benefits based on Eligibility Quarterly Cash Profit Sharing - after 1 year of service Tuition Reimbursement - after 6 months of service Paid Parental Leave - after 1 year of service About Hearth & Home Technologies Hearth & Home Technologies (HHT) is the Residential Building Products of HNI Corporation (NYSE: HNI). We are the nation's leading developer, manufacturer, distributor and installer of hearth products. Our products include a wide variety of gas, electric, wood burning fireplaces, inserts, stoves, fire tables, fire pits and accessories. HHT carries the industry’s best and most recognized brands, including Heat & Glo, Heatilator®, Harman™, Quadra-Fire®, PelPro, Vermont Castings, Outdoor GreatRoom Company (OGC), and Fireside Hearth & Home retail stores and builder design centers. We have locations throughout the United States with Lakeville, MN as our home. Our driving passion surrounds the pillars of bringing warmth, comfort, and peace of mind to the places people live and gather! In addition to your salary, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision Insurance, Health Savings Account, Disability Benefits, Life Insurance, Paid Time Off and Holidays, and Retirement Benefits). Hearth & Home Technologies benefits are subject to eligibility requirements. Our company endeavors to make www.hearthnhome.com accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please contact us at 952-985-6000 or via email at [email protected]. The Company is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, national origin, disability, protected veteran status, or other characteristics protected by law. #J-18808-Ljbffr

SMT/PCB Equipment Operator

LEDdynamics Randolph, VT

Join to apply for the SMT/PCB Equipment Operator role at LEDdynamics 1 week ago Be among the first 25 applicants Join to apply for the SMT/PCB Equipment Operator role at LEDdynamics Get AI-powered advice on this job and more exclusive features. This range is provided by LEDdynamics. Your actual pay will be based on your skills and experience — talk with your recruiter to learn more. Base pay range $22.00/hr - $25.00/hr Job Title: SMT/PCB Equipment Operator Location: Randolph, Vermont Reports To: Production Manager Company: LEDdynamics About Us LEDdynamics is a leader in LED lighting technologies, specializing in innovative, high-performance lighting components and systems. As part of the 3LED group of companies, we combine precision manufacturing with deep engineering expertise to deliver reliable, energy-efficient solutions for commercial, industrial, and specialty lighting applications. Position Overview We are seeking a detail-oriented, mechanically inclined SMT/PCB Equipment Operator to support our surface mount technology (SMT) line and printed circuit board (PCB) assembly processes. This hands-on role is critical to maintaining high product quality, efficient throughput, and timely customer delivery. Key Responsibilities Set up, operate, and monitor SMT assembly equipment including stencil printers, pick-and-place machines, reflow ovens, and AOI (Automated Optical Inspection) systems. Perform manual assembly tasks including hand soldering, depaneling, and visual inspection. Load and maintain component feeders and ensure accurate inventory usage. Perform preventative maintenance and basic troubleshooting on SMT equipment. Inspect assembled PCBs for solder quality, alignment, and defects using magnification tools and AOI results. Collaborate with production and engineering teams to identify and resolve process issues. Document production data, quality checks, and equipment performance. Ensure adherence to ESD, safety, and cleanroom procedures. Qualifications 2+ years of experience operating SMT/PCB equipment in a manufacturing environment preferred. Familiarity with SMT processes and IPC-A-610 standards. Ability to read and interpret technical documents, work instructions, and schematics. Strong attention to detail and commitment to quality. Ability to work independently and as part of a small, focused team. Comfortable with basic computer skills (data entry, interface with machine software). Preferred Experience Experience with Yamaha, Mycronic, or similar pick-and-place systems. Familiarity with ISO 9001, lean manufacturing, or quality control systems. Background in LED lighting, electronics, or precision assembly is a plus. Working Conditions Full-time, on-site position in a climate-controlled manufacturing facility. Standing for extended periods and handling small components. Occasional lifting of up to 40 lbs. What We Offer Competitive pay and benefits. Opportunities for growth in a fast-evolving technology company. Collaborative environment with a commitment to quality and innovation. About LEDdynamics Founded in 2000 and proudly rooted in Vermont, LEDdynamics has grown into a national leader in LED technology and innovation. From inventing breakthrough LED drivers to powering next-generation lighting systems, our work has shaped the future of light. We design and manufacture our products right here in Vermont—proving that world-class innovation can thrive in a small-town setting. Every project we take on reflects our belief in craftsmanship, ingenuity, and real-world impact. Seniority level Seniority level Entry level Employment type Employment type Full-time Job function Job function Management and Manufacturing Industries Appliances, Electrical, and Electronics Manufacturing Referrals increase your chances of interviewing at LEDdynamics by 2x Sign in to set job alerts for “Equipment Operator” roles. Groundperson/Equipment Operator | Chippers, Inc. Heating Plant Operator - 3rd Shift - Norwich University Seasonal Fuel Delivery Driver-Sign-on Bonus Public Safety Radio Technology Specialist I - Limited Service Volunteer Community Driver - Washington County We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI. #J-18808-Ljbffr

CNC Router Operator

Fenton Mobility Products Randolph, NY

Join a successful manufacturing team with opportunities for training and exposure to new technologies such as robotics and lasers. About Fenton Mobility Fenton Mobility is an industry leader in mobility innovation, designing and manufacturing safe, custom solutions for buses, vans, and public transit systems. From individual upfits to large-scale fleet projects, everything we build is crafted right here in our modern facility in Randolph, NY. When it comes to accessible transportation, we set the standard. Why You Should Apply to this CNC Router Role Small company with a national reputation and family-like atmosphere. Full-time, direct-hire first shift position. Comprehensive benefits including paid vacation, sick time, health insurance contributions, and 401(k) with company matching. Diverse tasks in CNC machining in a rapidly growing company. Salary $18 - $22 per hour depending on relevant experience What You'll Be Doing as CNC Operator Operating a CNC router machine for fabricating wood parts and other components. Monitoring and changing tooling as required. Measuring finished product and performing quality checks. Cross training in other manufacturing processes. About You Be able to do the job as described. At least 1 year of shop floor experience operating CNC machinery. Familiar with changing tooling. Capable of physical tasks such as bending, lifting, and carrying materials. Able to prioritize and to perform a variety of tasks. Apply today! This position requires a background check.

Machine Operator

HRU Tech Randolph, Wisconsin

Position: Machine Operators All the relevant skills, qualifications and experience that a successful applicant will need are listed in the following description. Location: Randolph, WI Shift options: 1st: 6AM-6PM (M- W) 6AM-11:30AM (Thursday) 2nd: 6PM- 6AM (M-W). 6PM- 11:30PM (Thursday) Pay: $21/hour (1st shift) $21.50/hour (2nd shift) Contract to hire position RESPONSIBILITIES INCLUDE: Ability to set up, run a line from start to finish, and shut down machines according to standard operating procedures (SOP) for each product run and daily production schedules Consistently produce high quality products in a safe and efficient manner that meet product specifications and labor standards Demonstrate good documentation processes (GDP) to maintain accurate quality checks and other required paperwork Maintains the general cleanliness and organization of work areas using 6S lean processes Operate material handling equipment including but not limited to forklifts, pallet jacks, and barrel handlers Identify areas to improve safety, efficiency, and ergonomics Assist with maintaining organization of warehouse including inventory control using RF guns and counts Compliance with all safety and environmental health requirements and strictly adhere to PPE required to handle all materials. Label and palletize manufactured products according to standardized pallet patterns. Assist in setting up production lines and moving production equipment as necessary from line to line Other Duties as assigned. REQUIREMENTS, EDUCATION and/or EXPERIENCE: Stamina to work 12 hour shifts 3.5 days per week and overtime as needed on Thursdays and/or Fridays Report to work daily and on-time for scheduled workdays and shift times Ability to work with minimal supervision Committed to working and communicating in a team environment Must communicate effectively with others by speaking, reading, and understanding written English and the ability to write legibly in English. High school diploma, GED equivalent or applicable experience in a manufacturing environment. Preference will be given to candidates who possess experience working with packaging machinery, in a food or feed manufacturing facility for a minimum of six months. The Process: To apply for this position, please follow these steps: Apply for this job with your current resume. Well get back to you the same day with some feedback on your application. Next youll be invited to an online screening conversation so we can go over the job requirements together and you can ask questions. After this stage well give you more feedback on your application and select the candidates to move forward in the process. Typically steps 1 to 4 takes less than 24 hours. HRU is an Equal Opportunity Employer. We value diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. #HRUGeneral

CNC Router Operator

Fenton Mobility Products Inc Randolph, NY

Job Description Job Description Join a successful manufacturing team with opportunities for training and exposure to new technologies such as robotics and lasers. About Fenton Mobility Fenton Mobility is an industry leader in mobility innovation, designing and manufacturing safe, custom solutions for buses, vans, and public transit systems. From individual upfits to large-scale fleet projects, everything we build is crafted right here in our modern facility in Randolph, NY. When it comes to accessible transportation, we set the standard. Why You Should Apply to this CNC Router Role Small company with a national reputation and family-like atmosphere. Full-time, direct-hire first shift position. Comprehensive benefits including paid vacation, sick time, health insurance contributions, and 401(k) with company matching. Diverse tasks in CNC machining in a rapidly growing company. Salary $18 - $22 per hour depending on relevant experience What You'll Be Doing as CNC Operator Operating a CNC router machine for fabricating wood parts and other components. Monitoring and changing tooling as required. Measuring finished product and performing quality checks. Cross training in other manufacturing processes. About You Be able to do the job as described. At least 1 year of shop floor experience operating CNC machinery. Familiar with changing tooling. Capable of physical tasks such as bending, lifting, and carrying materials. Able to prioritize and to perform a variety of tasks. Apply today! This position requires a background check.

Best Match

Sewing Machine Operator & Repair Specialist

LION Randolph, MA

Sewing Machine Operator & Repair Specialist Looking for a job with a purpose? Want to make a real difference in the world? LION TotalCare is the leader in Firefighter PPE cleaning and repair maintenance. Our NFPA-certified services help enhance firefighter safety and save Fire Departments money by extending the life of their PPE. Join us to help protect our Firefighters! Benefits of Working with Us! Competitive Salary Health & Dental Benefits Vision Care Benefits Life & Disability Insurance 401K Plan Education Reimbursement Program Company Events and More! LION is an international company that operates in three markets: the emergency services, military and civilian agency uniforms, and personal equipment markets. LION serves a global customer base of fire departments, military installations, institutions, corporate organizations, and training companies from multiple offices around the world. JOB SUMMARY Sewing Machine Operator & Repair Specialist As a Sewing Machine Operator & Repair Specialist, you will be performing repairs to firefighter gear to meet our customer specifications and expectations. You will ensure high levels of customer satisfaction, efficient service delivery, and maintain high-quality standards. You can help save lives. Position Details: Location: 40 B Teed Drive, Randolph, MA, 02368 Hours: Monday to Friday 7:00 am 3:30 pm Reports to: TotalCare Center Manager ESSENTIAL FUNCTIONS: Operate a sewing machine. Single, double, or multi-needle serger. Sew repairs to gear in accordance with company best practices. Prepare machine by changing needles and thread, and oiling and changing bobbin. Mount sewing machine attachments like needles, threads, pattern plates, and adjust machine guides according to repair needs. Meet delivery deadlines by working with the team to ensure firefighter gear is repaired on time and meets our high quality standards. Maintain cleanliness and good housekeeping in sewing area. Other duties as needed. ADDITIONAL RESPONSIBILITIES: Works well with other production associates. Must be able to follow instructions consistently with minimum supervision. Must be able to sew and follow sewing standards. Maintain a clean and safe work environment. Must follow company rules and regulations. Ability to multi-task. EDUCATION & EXPERIENCE QUALIFICATIONS: 1+ years of work experience with industrial sewing equipment. Basic knowledge of sewing principles and garment construction. Positive attitude and demonstrated ability to work well with a team. Good attendance record. Strong problem-solving skills. Self-motivated and organized. Ability to work in a fast-paced, time-sensitive environment and to meet all deadlines. PHYSICAL REQUIREMENTS: Standing, sitting, walking, bending as needed. Using proper lifting technique may be required to lift objects up to 30 lbs. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Forklift Operator

Lowes Randolph, MA

Job Title: Forklift Operator Employer: Lowe’s Job Description: As a Forklift Operator at Lowe’s, you will be responsible for operating a forklift to move, locate, relocate, stack, and count merchandise within the warehouse. You will ensure the safe and efficient handling of goods, supporting the overall operations of the warehouse and facilitating the timely replenishment of store inventory. Key Responsibilities: - Operate a forklift to move materials throughout the warehouse. - Load and unload delivery trucks and trailers. - Ensure the safe and secure handling of packages. - Assist with inventory management and stock rotation. - Perform regular maintenance checks on the forklift. - Follow safety protocols and procedures to prevent accidents and injuries. - Collaborate with warehouse staff to meet productivity goals. Qualifications: - High school diploma or equivalent. - Valid forklift operator certification. - Previous experience operating a forklift in a warehouse setting. - Ability to lift and move heavy objects. - Strong attention to detail and safety protocols. - Good communication and teamwork skills.

Best Match

Driver / Operator

Moran Environmental Recovery Randolph, MA

Job Description Job Description Job Title: Vacuum Truck Operator Department: Operations Reports To: Logistics Manager JOB SUMMARY The Vacuum Truck Operator must be able to work in compliance in the delivery of MER’s four core service lines (Emergency Response, Industrial and Marine Services, Facility Decontamination, and Site Remediation). Drivers must adhere to and maintain strict compliance with corporate/office policies and procedures, established health and safety protocols, and all applicable local, state, and federal regulations. JOB RESPONSIBILITIES Execution of field work encompassed in remediation and industrial maintenance projects while under direct or indirect supervision. Drive an average of 30% of the time as well as work onsite as part of a team. Depending on location, drivers may be asked to perform the duties of a Field Technician if business needs warrant it. Correct completion of all job-specific, employee-related and equipment-related MER paperwork including Timesheets, Daily Work Reports, Driver’s Logs, Pre and Post Vehicle Inspection and Daily Tailgate Safety Meeting Forms. Understand and enforce project’s detailed scope-of-work to maintain strict compliance with contract documents, project schedules, and corporate policies and procedures. Work safely during all phases of performing the job duties required in the field. Ability to perform work inside areas of varying dimensions, involving squatting and crawling for possible extended periods. Ability to follow directions; read/speak and understand English; read and understand common danger placards / labels and hazardous warning literature including site safety plans. The ability to safely drive and perform safety checks on all vehicles for which licensed. Operate various vehicles safely, including but not limited to Vacuum Truck, Vacuum Trailer, Turbo-Vac, Roll-Off Truck and Hydro Vac. Project work may require out-of-town travel for two weeks or more Must be able to understand and comply with company and client safety standards. Due to the diversity of both scheduled and non-scheduled projects, physical demands, and environmental conditions vary significantly depending on the project. Work outside year-round in all types of weather. May work in environments that are extreme in nature like environmental conditions such as heat, cold, heights, hazardous chemicals, loud noises, dangerous equipment, long hours etc. May be exposed to varying levels of physical activities and physical extremes such as long periods of standing, walking, crouching, use of hands, and heavy lifting of up to 50 pounds or more. Must be clean shaven at all times to allow immediate donning and seal of respirator. QUALIFICATIONS Must be able to effectively operate a manual transmission. Requires High School Diploma or GED (or equivalent reading, writing and reasoning skills) and 2-3 years of experience operating vacuum trucks (or similar equipment). Additional experience in related work (emergency response, manual labor, general construction, industrial cleaning) is preferred. A valid Class “B” or “A” Commercial Driver’s License with Hazmat and Tanker endorsements is required. TWIC Preferred. OSHA 40-HR HAZWOPER and Confined Space Entry certifications are required to complete within the first 30 days of employment. Successful completion of a pre-employment background and substance screening process including, but not limited to, employment verifications, criminal search and Motor Vehicle Record (MVR) search as well continued verifications throughout employment to ensure that all records meet company policy standards. BENEFITS Competitive Salary Health, Dental, and Vision Insurance 401k with Company Match Paid Time Off (PTO) Paid Holidays This is an hourly position; the hiring range for the Driver/Operator position in Randolph, MA is: $26.00/hour - $30.00/hour The actual hourly rate offered will be determined based on multiple factors including but not limited to relevant skills and experience. MER is committed to providing equal employment opportunities in a drug free work environment to all employees and applicants without regard to race, religion, color, sex, gender identity, sexual orientation, national origin, ancestry, citizenship status, uniform service member status, marital status, pregnancy, age, protected medical condition, genetic information, disability or any other protected status in accordance with all applicable federal, state and local laws. Moran Environmental Recovery is an Equal Opportunity Employer.

Posted 19 hours ago

RN, Registered Nurse Program Manager - Pedi MFM Clinic

CHRISTUS Health Randolph, TX, TX

Description Summary: Directs the operation of clinical programs and promotes quality services for the community and patients. Requirements: Education/Skills Bachelor's degree in Nursing, Health Care Administration or Business Administration required Master's degree in Nursing, Health Administration, Business Administration, Nursing, or related advanced degree in health related field preferred. Experience Minimum of 3-5 years clinical patient care experience in a relevant setting Minimum of five (3) years of healthcare management experience Licenses, Registrations, or Certifications Current Texas Registered Nurse (RN) license required Work Type: Full Time EEO is the law - click below for more information: We endeavor to make this site accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please contact us at (844) 257-6925.

EMT

Acadian Ambulance Randolph, TX

Job Description JOB SUMMARY: Provide appropriate, efficient and timely pre-hospital basic life support care and transportation of the sick and injured in accordance with local, state, national and Acadian Ambulance standards of practice. EQUIPMENT: Ambulance; stretcher; folding stretcher; scoop stretcher; long and short spine boards and KED; spinal immobilization equipment; radios and computerized communications equipment; splinting devices; suction devices; bandaging materials; oxygen bottles and tubings; basic airway management devices; intravenous fluid therapy equipment; fire extinguisher; simple extrication devices; simple mechanics tools; blood pressure cuff and stethoscope; patient restraints; simple traction devices; other medical and related equipment items not specifically listed may be added as new items are introduced. DUTIES AND RESPONSIBILITIES: Except as specifically noted, the following functions are considered essential to this position. Conducts a careful examination of the patient for signs and symptoms of illness/injury and assists other medical personnel as necessary. Administers prompt and efficient basic life support care within the limits of licensure or certification and in accordance with approved protocols prior to and during transport. Provides careful handling of the patient to and from the ambulance. Provides safe and efficient transport of the patient in the ambulance to the medical facility. Provides a safe and efficient transfer of patient and patient care information to the receiving personnel at the destination. Documents all aspects of patient condition and treatment on EMS run reports. Obtains and records non-medical patient information as required. Completes other patient documentation and forms as required. Conducts regular unit inventory and equipment testing to ensure all equipment for which the EMT-Basic is responsible is present, clean and in proper working order. Upon completion of transport, responsible for all assigned duties which will place the ambulance and equipment back in service. Responsible for full knowledge of the ambulance's basic life support equipment and its proper use at all times. Documents and reports all needed repairs to the proper maintenance departments (electronic or mechanical) as well as to supervisors and other ambulance personnel as required. In the absence of other qualified personnel, responsible for the use of basic extrication tools and procedures to gain access to the patient if necessary. In the absence of other qualified personnel, responsible for controlling the patient's surroundings in such a way as to minimize further danger and control the actions of bystanders. In both the emergency and non-emergency setting, operates / drives the ambulance in a safe and efficient manner, following company driving guidelines, so the safety or condition of the occupants are not compromised. Follows all FCC regulations when communicating via electronic communications equipment. Attends all mandatory meetings as scheduled. Completes assigned station and station grounds duties. Orders supplies and equipment from Central Supply to replenish station and ambulance inventories as needed. Completes assigned ambulance duties (i.e., washing, waxing, interior and exterior cleaning, etc.) as required. Completes all required company reports and logs and when necessary provides other ambulance and supervisory personnel with the information. Approved Field Training Officer are responsible for precepting EMT-Basic students as well as new employees as directed. Must meet and fulfill the qualifications, requirements, functions and responsibilities of the Emergency Medical Technician - Basic job descriptions. Performs other duties as assigned. These duties, responsibilities, requirements, and conditions are not intended to be all inclusive and may be expanded to include other duties, responsibilities, requirements and conditions. PHYSICAL DEMANDS : Physical activities and the amount of time spent performing each while on this job: AMOUNT OF TIME None Up to 1/3 1/3 to 2/3 Over 2/3 Stand x Walk x Sit x Talk or hear x Use hands to finger, handle or feel x Climb or balance x Stoop, kneel, crouch or crawl x Reach with hands and arms x Taste or smell x Weight lifting requirements and the amount of time spent lifting on this job: AMOUNT OF TIME None Up to 1/3 1/3 to 2/3 Over 2/3 Up to 10 pounds x Up to 25 pounds x Up to 50 pounds x Up to 100 pounds x More than 100 pounds x Vision requirements: X Color Vision (Able to identify and distinguish colors.) X Distance Vision (Clear vision at 20 feet or more.) X Close Vision (Clear vision at 20 inches or less.) X Peripheral Vision (Able to observe areas that can be seen up and down or to the left and right while eyes are fixed on a given point). X Depth Perception (Able to judge distances and spatial relationships.) X Focusing (Able to adjust the eye to bring an object into sharp focus.) Specific job duties which require the physical demands noted above: Lifting of patient from beds or emergency scenes onto stretcher and into ambulance; carrying of patients and equipment; climbing stairs or steps; working in unusual geographic settings such as ditches, hills, embankments, high elevations - natural or manmade; working with small, delicate items such as oxygen tubings, bandaging materials, IV setups when assisting advanced partners, medications, etc.; visually assessing the safety and condition of the emergency scene and the patient; verbally communicating with patients, co-workers, medical personnel and the public either directly or indirectly via electronic communication equipment; driving the ambulance in emergency and non-emergency situations both short and long distances. WORK ENVIRONMENT : Specific situations that lead to environment conditions can include: hazardous materials calls, electrical emergencies, vehicular accidents, outdoor emergency settings, hurricanes, tornadoes, industrial accidents, conditions affecting driving, settings where heavy equipment such as extrication tools are in use, etc. Exposure to environmental conditions and the amount of time exposed to each on this job: AMOUNT OF TIME None Up to 1/3 1/3 to 2/3 Over 2/3 Wet, humid conditions (non-weather) X Work near moving mechanical parts X Work in high, precarious places X Fumes or air borne particles X Toxic or caustic chemicals X Outdoor weather conditions X Extreme cold (non-weather) X Extreme heat (non-weather) X Risk of electrical shock X Work with explosives X Risk of radiation X Vibration X Noise level associated with this job: Moderate Noise (Examples: business office with typewriters and/or computer printers, light traffic). Loud Noise (Examples: metal can manufacturing, large earth-moving equipment). Very Loud Noise (Examples: jack hammer work, front row at rock concert). QUALIFICATIONS: High School Diploma or GED. National and/or State certification as an Emergency Medical Technician determined by appropriate state requirements. Current CPR certification as established by the American Heart Association. Current and valid state-issued driver's license determined by appropriate state requirements (equivalent of a Louisiana Class "D" driver's license). Must be able to read, write and communicate professionally and effectively with employees and managers. Must possess the ability to write simple correspondence or reports. Must possess the ability to effectively present information in one-on-one and small group situations to other employees and/or managers. Must be knowledgeable of company protocols, operational procedures and safety policies. Must be able to drive large vehicles in normal and adverse conditions. INTERPERSONAL REQUIREMENTS : Maintain social, ethical and organizational norms. Achieve accomplishment of all task details, no matter how small. Maintain good personal motivation; develop a sense of ownership of job tasks and results. Must have a sense of urgency for all work performed. Must maintain professionalism and respect with patients, co-workers, emergency service providers, healthcare workers and the general public. TRAINING REQUIREMENTS: Orientation to job requirements. Acadian Companies JOB DESCRIPTION Job Title: Emergency Medical Technician Alternate Job Title(s): EMT Division/Department: Acadian Ambulance Service Status: Hourly-Non-Exempt Performance Appraisal Type : Medic REPORTS TO: EMT-IntermediateEMT-Paramedic Operations Supervisor Operations Manager Vice President of Operations All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

CNA 104

Right at Home Northeast & Central Nebraska Randolph, 68771

We are currently hiring for GREAT CNA’s who want to make GREAT pay by helping nursing homes in Nebraska! There is no greater need for CNA’s than NOW ! Right at Home believes that our Certified Nursing Assistants (CNA) are the heart of our business. Without you, we couldn’t build meaningful relationships with our clients, put a smile on their face or be the highlight of their day. It is hard to put a price on helping others but we know how important you are and value the impact you would make day in and day out for our clients. In taking this position, you would receive: Competitive pay. $20-$23 per hour! Flexible schedules. You work the shifts that work best for you! Weekly pay Mobile clock in/out Ongoing PAID training and development Make a difference, develop meaningful relationships and meet new people Give back to those who need you most (our clients need you now more than ever before!) Recognition, celebrations and great team interactions! In this role, we stand prepared to equip you with the right personal protective equipment (PPE) and are ready to assist as you care for our vulnerable population of seniors and adults with disabilities. Must Haves: Active Nebraska CNA license At least 6 months of CNA LTC experience Reliable transportation Valid driver’s license Authorization to work in the United States Ability to demonstrate an excellent work ethic Why Right at Home? We truly believe that where you work matters, and as a company that believes in improving the lives of those we serve, we think we know a thing or two about what makes our employees happy. Each Right at Home office and business is independently owned and operated under a franchise agreement with Right at Home, LLC. Right at Home, LLC is not the employer or joint employer of the employees of any of its franchised offices. For comments, questions or to learn more about Right at Home, please visit www.rightathome.net.

Drive With Uber This Holiday Season

Uber Randolph County, IN

What is Uber? Driving with Uber is an alternative to a part-time or full-time job and can get you earning cash on the road quickly. Driving with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary) Why Drive With Uber?: Receive your earnings fast: With Uber, you can cash out your earnings up to 5 times a day with Instant Pay. You are your own boss: You decide how much or little you want to drive and earn. Don’t have a car? Uber has rental partners available that allow you to rent a car by the hour, day, or week. Signing up only takes a few minutes: We'll provide support along the way and get you on the road as soon as your registration is processed. Requirements to Drive: Meet the minimum age to drive in your city Have at least one year of licensed driving experience in the US (3 years if you are under 25 years old) Use an eligible 4-door vehicle You consent to driver screening and background check You have an iPhone or Android smartphone Vehicle Requirements vary by region, we’ll show you what is needed Additional Information: If you have previous employment experience in transportation (such as a delivery driver, driver, professional driver, driving job, truck driver, heavy and tractor-trailer driver, cdl truck driver, class a or class b driver, local truck driver, company truck driver, taxi driver, taxi chauffeur, cab driver, cab chauffeur, taxi cab driver, transit bus driver, bus driver, coach bus driver, bus operator, shuttle driver, bus chauffeur) you might also consider driving with Uber to earn extra money. We also welcome drivers who have worked with other peer-to-peer ridesharing or driving networks. Drivers using the Uber platform come from all backgrounds and industries ranging from traditional driving and transportation industries to other industries. No professional driving experience required. Driving with Uber is a great way to supplement your part time or full time income. Additional Documents to Drive A valid US Driver’s license Proof of residency in your city, state, or province Proof of vehicle insurance if you plan to drive your own vehicle *Depending on your city or state, additional documentation or information may be required. Our support team is available 24/7 to help you answer any questions you may have about registration.

Work Life Balance

Driver, Trainee Hourly

Mclane Company, Inc. Randolph, MN

Take your career further with McLane! A teammate in this position learns the essential functions of the Driver job including the accurate and timely distribution of products to various customer locations. The Driver Trainee gains exposure to warehouse and other operational functions as part of the developmental process of becoming a McLane Driver. On site (Northfield) CDLA School that is fully paid by McLane. School is Monday - Friday in Northfield, MN. Pay Rate: $23.50 an hour while in school and training. Must be able to obtain CDLA Permit prior to class starting. Average wage for New driver is $80,000-$90,000 in first year. Minimum guarantee $65,000 per year Day 1 Benefits available: medical, dental, and vision insurance, FSA/HSA and company-paid life insurance. 401(k) Profit Sharing Plan after 90 days. Paid holidays, vacation time, sick leave accrual, educational assistance program, and more! ESSENTIAL JOB FUNCTIONS: A teammate in this job will train side-by-side with a Driver Trainer to acquire the skills necessary to perform the following functions: Maneuver tractor into position to attach trailer and handle lines to secure. Operates truck in a safe manner in compliance with all local, state, and federal regulations and company policies. Inspect tractor-trailer equipment for defects pre/post trip and submit DOT inspection report indicating condition. Operates Driver Delivery Handheld (DDH), document delivery receipts/product temperatures and exceptions. Inspects trailer to ensure product is secure for undamaged transport of product. Rides and trains with Driver Trainer of tractor-trailer to various destinations, gaining knowledge of commercial driving regulations and observing the Driver's skill in starting engine properly, approaching intersections, making turns, backing, parking, and maneuvering vehicle on the road and on customer premises. Maintain driver log (Manual or PeopleNet) according to DOT regulations, documenting delivery receipt, product temperatures and exceptions. Assists the Driver in unloading trailer and delivering product into customer premises. MINIMUM REQUIREMENTS: A teammate in this position must: High School Diploma or GED preferred. Be at least 21 years of age. Must have CDLA Permit. Complete training and receive Class A CDL in 6 months or less. Ability and willingness to select/load/unload and/or deliver ALL products that may be ordered by McLane customers. Stand, walk, sit, climb, reach, bend, squat, and stoop to accomplish the essential job functions. Read and comprehend labels, instructions, and bills of lading. Perform mathematical calculations to verify quantities of product. Communicate with customers, management, and other teammates. Safely drive a tractor-trailer, use a 2-wheeled dolly, ramp, and on board PeopleNet devices. WORKING CONDITIONS: The environment encompasses all areas of a distribution center, transportation department, shop and customer facilities. Working conditions could contain moderate noise, vibration of vehicle and extreme weather conditions depending on climate. Regular and frequent travel, including overnight. WORK SAFE HOME SAFE is one of our mottos at McLane Company. Your safety and ability to do your job and get home to your family is why all prospective teammates go through a pre-hire screening process. Candidates will be subject to a background check and drug screen in accordance with applicable laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Machine Operator jobs in Randolph