Quality Inspector at Trillium Staffing

Quick Apply

Quality Inspector

International Executive Service Corps Columbus, MS

At Aurora Flight Sciences, we design, build, and fly advanced aircraft and enabling technologies from concept to reality. We are searching for a talented and self-motivated Quality Inspector to help us create the future of flight. Responsibilities will include but not be limited to the following: Responsibilities Quality inspectors conduct verification and validation inspections of product and/or process against prescribed requirements. Inspectors follow quality assurance plans, use calibrated inspection equipment, and prescribed inspection methods. When non-conformances are identified, inspectors document these conditions with detail to enable an effective and efficient Material Review Board process. Inspectors may be called upon to participate in root cause/corrective action investigations. Must adhere to all safety and department procedures, practices, and directives. Must be able to work alternate shifts, overtime, and weekends when required. Minimum Requirements Education/experience typically acquired through advanced education (e.g. Associate) and typically 1 or more years' quality or aerospace manufacturing or an equivalent combination of education and experience (e.g. Bachelor, 3 years' related work experience, etc.). Demonstrable skill in using precision rulers, calipers, micrometers, bore gages, and other similar inspection tools. Able to document inspection results clearly citing prescribed requirements. Must be a US Person. Preferred Requirements AAS degree in Quality or related discipline from an accredited university. ASQ certified quality inspector (CQI). 3+ years’ experience in quality or aerospace manufacturing environment. Experienced in carbon composite aerospace manufacturing processes. Exposure to 3-dimensional inspection methods. Familiar with CAI (computer aided inspection) methods and techniques. Able to effectively use MS Office suite of tools. Physical Requirements Must be able to work alternate shifts, overtime, and weekends when required. Ability to work in a manufacturing environment and wear proper PPE. Pass annual visual acuity exams. Physical dexterity sufficient to use 2-dimensional hand inspection tools and equipment. Able to lift 35 lbs. safely without special accommodations. Work onsite in Columbus, MS. Salary Range (Annualized USD) Minimum Range: $33,000.00 to $58,000.00 Maximum Range: $42,000.00 to $74,000.00 Aurora Company Overview Aurora Flight Sciences, a Boeing Company, is a leader in the development and manufacturing of advanced unmanned systems and aerospace vehicles. Our mission is to apply autonomy and robotics to the development, production, and operation of advanced aircraft. During the last three decades, Aurora has designed, rapid-prototyped, and flown an average of one new vehicle a year for both government and commercial customers. Now, as an independent subsidiary of Boeing, Aurora’s innovation is combined with Boeing’s size and strength, creating an unprecedented opportunity to shape the future of aerospace systems. Equal Opportunity Employer Aurora Flight Sciences, A Boeing Company, is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. Aurora Total Rewards At Aurora Flight Sciences, a Boeing Company, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. Aurora Flight Sciences provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location and date of hire. Please note that the salary information shown is a general guideline only. Salaries are based upon candidate experience and qualifications, as well as market and business considerations. #J-18808-Ljbffr

Work Life Balance

Sr. Quality Inspector (Contract)

Airbus Helicopters, Inc. Columbus, MS

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at [email protected] Job Description: Job Summary: The Senior Quality Inspector performs receiving inspections approving or rejecting incoming materials through established receiving inspection processes while recording quality inspection results. This position is responsible for performing detailed inspections of engines, main/tail rotor blades, materials, paint, backshop activities, functional tests, operational test and dimensional inspections of aircraft, systems and components to determine airworthiness. Primary Responsibilities: Inspection: 55% Perform required technical inspections to receive or reject incoming material, airframes, aircraft components and to detect/report suspected unapproved parts Detect hidden damage during inspections of airframe structures, components and sub-assemblies that could occur during shipping, receiving, or manufacturing Physically and systematically quarantine non-conforming components and assemblies identified during inspections Perform stock inspections/purges when notified of possible non-conforming/suspected unapproved material Evaluate and disposition sales returns Supervise the use of Measuring and Test Equipment to ensure it is well maintained and current relative to its calibration cycle Validate disposition of parts or repaired parts routed to shop floor, from warehouse, internal shops and suppliers for conformity and serviceability in accordance with approved data Conduct in-process inspections for components in electrical backshop, manufacturing, composites, blades and paint to decide the serviceability or rejection of manufactured parts, electrical components, and paint Verify build of aircraft system wiring harnesses, connectors and electrical terminations as per design drawings Complete inspections to decide serviceability or rejection of Composite and Aluminum structures and panels including in-process “Clearance-to-close”, dimensional checks, acoustic tap testing or repair inspection of cracks, cell ruptures, contamination, punctures and scratches Inspect aircraft aluminum, titanium or steel structures for cracks, corrosion, damage and improper assembly Determine proper shimming and joining of structures with rivets or other hardware in accordance with design drawings, engineering disposition, and other approved data Select product samples and check them using appropriate methods (measuring dimensions, testing functionality, comparing to specifications etc.) to validate conformity to approved drawings and manuals Accomplish in-process and final quality inspections for maintenance, repair, modification and rework of aircraft, rotorcraft main and tail rotor blades, components and aircraft sub-assemblies Observe and validate instrument connections, functional or operational tests, adjustments of aircraft radios, navigational systems and flight control systems and instruments to ensure they meet required specifications Verification of testing for emergency locator transmitters (ELT), Transponders, Altimeters, Airspeed Indicators and Air Data Computers in accordance with Title 14 CFR Parts 91, 135 and 43 Perform conformity inspections for Supplemental Type Certificated (STC) development projects, parts manufacturer approval (PMA) parts, structural and electrical components Provide Inspection and return to service support for offsite repair station activities Documentation: 25% Ensure proper tagging, identification and airworthiness of parts released to Airframe, Engines, and Accessories Compare quantity, part number, and serial number of items received with procurement data, purchase orders and other specifications to ensure accuracy and completeness Create, distribute, and track in SAP and disposition the monthly Shelf Life Expiration Date (SLED) report as required Create quality notes/non-conformity for non-conforming material detected and collaborate with Quality Engineers on non-conformity resolution Confirm materials have required documentation (i.e. 8130-3, EASA Form, Certificate of Conformance) Document applicable maintenance actions for airframe, engine, accessories and components in accordance with Federal Aviation Administration (FAA) approved regulations and company procedures. Properly identify and document items in quality quarantine cage Research and document compliance with all applicable calendar/hourly inspections, life limited or cycle limited components, airworthiness directives, service bulletins, and alert service bulletins Perform and Document return to service for airframe, engine, blades, accessories or components after production, maintenance, overhaul, repair or modification Compose and prepare required delivery documentation in relation to qualifying the airworthiness or return to service of aircraft, engines, parts, components and systems Validate that the state of preservation has been applied and is current if applicable along with traceability of life limits and/or time since overhaul Research, compile and document maintenance of main/tail rotor blades and components in accordance with FAA regulations and/or EASA regulations as applicable Verify offsite package has been completed, submitted, and approved prior to engaging in any offsite repair station activities Quality Department Support/Continuous Improvement: 20% Uphold Airbus Core Values while welcoming challenges and creating an environment for success Provide technical guidance and training to team members in regards to proper execution of documentation, inspection processes and procedures Recommend updates by reviewing quality procedures, processes, documents and forms used during daily activities for accuracy and completeness Ensure compliance with company policies, procedures and FAA Regulations Support Company events, departmental meetings, special projects and team meetings Use processes and metrics such as, but not limited to SQCDP, key performance indicators, practical problem solving, plan do check act, root cause and corrective action and other quality department metrics to support continuous improvement of company policies, procedures, and processes ensuring that company objectives are on target Demonstrate creativity, propose and implement innovations using lean methodologies to ensure that top company objectives are achieved Provide training to repair station personnel to support offsite maintenance activities Additional Responsibilities: Other duties as assigned: Qualified Experience and Training: Education: Required High School Diploma or Equivalent Experience Preferred Associates Degree in aviation or related industry Experience: Required 6 years related Quality Inspection on aircraft components and systems or 8 years combined as a quality inspector and certificated aviation maintenance technician (AMT) on aircraft components and/or systems Preferred 8 years or equivalent diversified experience on Airbus Helicopters products as either a certificated AMT or quality inspector Licensure/Certifications: Required Current/Valid FAA Airframe & Powerplant License Preferred FAA Inspection Authorization (IA) FCC 2nd Class License Non Destructive Inspection (NDI) certificate Designated Manufacturing Inspection Representative (DMIR) Travel Required: 15% Domestic and International Citizenship: US Person under ITAR definition (U.S. Citizen, green card holder or person covered under our existing ITAR license) Clearance: None Qualified Skills: Knowledge, Skills, Demonstrated Capabilities: Required Ability to interpret technical and regulatory documentation Ability to effectively communicate verbally and in writing with all levels of personnel Familiar with inspection tools, aids and devices used in determining tolerances and specification limits Have the experience and flexibility to work in multiple areas Preferred None Communication Skills: Required: Ability to communicate effectively in verbal and written form in English Preferred: Proficiency in French, German or Spanish Technical Systems Proficiency: Required: Intermediate Experience and Utilization of the following: Microsoft Office Suite (Excel, PowerPoint, Word and Access) Adobe Acrobat SAP Smartsheet G Suite OCE/ARAS/Bflow T.I.P.I Onbase Orion eTechPub Preferred: None Complexity of the Role: Level of Decision Making: Senior Quality Inspectors must routinely evaluate the airworthiness of aircraft, articles, serviceability of repairs, inspections, maintenance and safety of operation. This includes but is not limited to loss prevention of revenue, property or life. This position requires a high-degree of independent decision making and integrity includes making command decisions regarding safety of flight or operation of aircraft. Senior Quality Inspectors also routinely collaborate with managers, customers, suppliers, technicians, engineering and other departments for inspection related decisions. Organizational information: This position will report to a Quality Assurance Manager who will manage principal activity. This person will have the flexibility and background to fill in for various inspection vacancies as they occur. Direct Reports : Is this a people manager? No # of Exempt Reports: 0 # of Non-exempt Reports: 0 Job Dimensions: Senior Quality Inspectors have direct contact with customers during pre and post completion of new aircraft, maintenance, repair or alteration of components and other customer owned assets. They are responsible for inspection and return to service of company owned aircraft used for customer pilot training, lease or demonstration. This position requires a professional individual who is knowledgeable, trustworthy, and able to connect with a customer and company advocacy mindset. Nature of Contacts: Involved Communication on a frequent Basis with internal and external parties Physical Requirements: While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects or tools; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch or crawl; talk or hear; taste or smell. The employee must occasionally lift and/or move up to 30 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Job requires use of computer and basic hand tools. Onsite or remote: 100% Onsite Vision: able to see and read computer screens and other electronic equipment with screens, able to read documents, reports and engineering drawings daily. Must have correctable near and far vision if applicable. Hearing: able to participate in conversations in person and via teleconference or phone and to hear sounds on the production floor including safety warnings or alarms. Daily Speaking: able to speak in conversations and meetings, deliver information and participate in communications. Daily Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): able to operate most office and personal electronic equipment and some tools including production tools such as hydraulic lifts. Able to operate most office and personal electronic equipment and some tools. Carrying: able to carry documents, tools, drawings, electronic equipment up to 30lbs/14kgs. Daily Lifting: able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs. Daily Pushing / Pulling: able to push and pull small office furniture and some equipment and tools. Daily Sitting: able to sit for long periods of time in meetings, working on the computer. Several times a week Squatting / Kneeling: able to squat or kneel to retrieve or replace items stored on low shelving. Daily Standing: able to stand for discussions in offices or on the production floor. Daily Travel: able to travel independently and at short notice. 15% or less yearly Walking (include routine walking such as to a shared printer to retrieve documents): able to walk through office and production areas including uneven surfaces. Daily Personal Protective Equipment required: Required PPE includes, but is not limited to, Safety Shoes, Safety Glasses, Hearing Protection, Respirators/Masks, and/or Protective Gloves as required by site and/or customer site Administrative position only PPE required: Steel-toed shoes are required for all shop floor visits, appropriate hearing/eye protection may also be required when visiting the shop floor. Equal Opportunity: All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status As a leader in our field, Airbus Helicopters, Inc. provides relocation assistance for qualified positions and a comprehensive compensation and benefits package. As a matter of policy, Airbus Helicopters, Inc. does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus Helicopters, Inc. does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. NOTE: Airbus Helicopters, Inc. reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Helicopters, Inc. Employment Type: Agency / Temporary Experience Level: Professional Remote Type: On-site Job Family: Quality Inspection Job Posting End Date: 02.21.2025 #J-18808-Ljbffr

Best Match

Columbus OH Field Inspector Insurance Loss Control

H & S Loss Control Inspections Columbus, OH

Qualified Field Inspectors for Insurance Loss Control are needed in your area! Immediate placement available. Pay: We pay a competitive standard flat fee per case based on customer as well as inspection type and complexity. The dominant standard flat fee range is $60 - $75, with some exceptions. Job Type: Independent Contractor Qualifications: We are currently seeking inspector applicants who are qualified to work in the USA and have a history of direct experience completing commercial line inspections and/or have completed a training course such as the VIITA Basic Commercial Line Inspector course or its equivalent. Full Job Description of the Loss Control Inspector: Receives assignments electronically and reviews for inspection requirements. Schedules the inspection appointment with the Insured by phone, email, or text. Inspects the property for potential issues or hazards pertaining to utilities/building systems (heating, wiring, plumbing), common areas, maintenance, protections, and life safety. Takes 20-35 exterior/interior photos and measurements as needed. Interviews the Insured for operations information, ages of the building systems, etc. Communicates inspection status through an online application. Completes the inspection report on the web-based Loss Control 360 system with Rapid Sketch. Returns the completed report electronically (the reports consist of check-off questions, narrative, and digital photos). Preferred skills: 3-5 years' experience providing commercial insurance loss control inspections Understanding of commercial property and casualty lines: property, general liability, and worker's compensation Ability to work independently, manage your time effectively, and communicate well verbally and in writing Comfortable completing reports online and uploading documents Other Recommended Skills: Commercial building inspection, fire safety, industrial safety, environmental safety, construction work, customer service, online reporting and document handling, ability to travel approximately a 50-mile radius. Helpful (but not required) Professional certifications: CSP, OHST, ALCM, ARM H&S Loss Control Inspections, Inc company information: We have provided insurance underwriting Loss Control inspection reports since 1970 and we work directly with insurance Underwriters. Our friendly support staff are available to help you by assigning orders and assisting with questions. Despite the challenges presented by recent events, H&S has been continuing to grow and successfully serve our customers with excellent reports and timely service! We look forward to hearing from all qualified applicants! #J-18808-Ljbffr

Columbus GA Field Inspector Insurance Loss Control

H & S Loss Control Inspections Columbus, GA

Qualified Field Inspectors for Insurance Loss Control are needed in your area! Immediate placement available. Pay: We pay a competitive standard flat fee per case based on customer as well as inspection type and complexity. The dominant standard flat fee range is $60 - $75, with some exceptions. Job Type: Independent Contractor Qualifications: We are currently seeking inspector applicants who are qualified to work in the USA and have a history of direct experience completing commercial line inspections and/or have completed a training course such as the VIITA Basic Commercial Line Inspector course or its equivalent. Full Job Description of the Loss Control Inspector: Receives assignments electronically and reviews for inspection requirements. Schedules the inspection appointment with the Insured by phone, email, or text. Inspects the property for potential issues or hazards pertaining to utilities/building systems (heating, wiring, plumbing), common areas, maintenance, protections, and life safety. Takes 20-35 exterior/interior photos and measurements as needed. Interviews the Insured for operations information, ages of the building systems, etc. Communicates inspection status through an online application. Completes the inspection report on the web-based Loss Control 360 system with Rapid Sketch and returns the completed report electronically (the reports consist of check-off questions, narrative, and digital photos). Preferred skills: 3-5 years' experience providing commercial insurance loss control inspections Understanding of commercial property and casualty lines: property, general liability, and worker's compensation Ability to work independently, manage your time effectively, and communicate well verbally and in writing Comfortable completing reports online and uploading documents Other Recommended Skills: commercial building inspection, fire safety, industrial safety, environmental safety, construction work, customer service, online reporting and document handling, ability to travel approximately a 50-mile radius. Helpful (but not required) Professional certifications: CSP, OHST, ALCM, ARM H &S Loss Control Inspections, Inc company information: We have provided insurance underwriting Loss Control inspection reports since 1970 and we work directly with insurance Underwriters. Our friendly support staff are available to help you by assigning orders and assisting with questions. Despite the challenges presented by recent events, H&S has been continuing to grow and successfully serve our customers with excellent reports and time service! We look forward to hearing from all qualified applicants! #J-18808-Ljbffr

Quality Inspector 2 – 1st shift

Vishay Intertechnology Inc. Columbus, NE

Every day, our global workforce crafts, engineers, and supplies electronic solutions that provide The DNA of tech for the world’s top companies. Our thousands of different components are in cars, phones, appliances, robotics—even emergency rooms—all making a difference in people’s lives, delivered by talented individuals who share a passion for discovering what’s possible and bringing new ways of thinking to life. The world’s challenges are your career opportunities Across 60 different plants in 19 countries, our products bring electronics to life for people around the world. Explore opportunities near you. Join us and help make the world's best electronics products even better Working here isn’t just about being part of our worldwide legacy; it’s about embracing change and seeking innovations to improve the world’s future. Today, our success drives us to become faster, stronger, and better as a global technology leader. Global talent, connected by a culture of support, openness and integrity The rich diversity of our global workforce provides a collective intelligence that brings different perspectives and skill sets that keep us ahead of the curve. We embrace being intellectually and culturally flexible and invest in providing opportunities to develop and grow so you can define your career path and discover your potential with us. Recent job postings We are seeking great talent to help us build The DNA of tech. Vishay manufactures one of the world’s largest… #J-18808-Ljbffr

Infrastructure & Capital Projects - Water/Wastewater Senior Construction Inspector, ANS

Accenture Columbus, OH

Infrastructure & Capital Projects - Water/Wastewater Senior Construction Inspector, ANS Management - North Central | Full-Time Job No. f8cf194b-8e78-4405-a0ac-2296913b820e | Columbus, OH You’ll address inquiries related to inspections for ongoing construction projects, ensuring all contract, regulatory and safety compliance requirements are met. You’ll exercise sound judgment to identify potential construction or inspection-related issues and promptly report findings to the immediate supervisor for resolution. You’ll work effectively within a multidisciplinary project team to troubleshoot and resolve challenges related to construction inspections and safety protocols. You’ll coordinate regularly with clients, owners, contractors, consultants, designers, and regulatory agencies to ensure seamless communication regarding inspections, compliance, and project progress. You’ll review and analyze project drawings to conduct constructability reviews and prepare accurate quantity take-offs for cost estimation purposes. You’ll document contractor resource utilization, including labor, materials, and equipment in daily reports, including tracking for any potential field changes. Assist in the negotiation of field construction changes related to time and materials. You’ll delegate responsibilities and provide leadership to Inspectors, ensuring their tasks are performed in accordance with company standards and industry regulations. You’ll assist in the training and professional development of Inspectors, ensuring compliance with safety and construction standards, and fostering skill growth. You’ll contribute to the establishment of policies and procedures for inspection practices, ensuring consistency, quality, and adherence to all compliance requirements. You’ll build and sustain strong relationships with clients by ensuring inspections are completed on time and that the project meets or exceeds their expectations for quality and safety. Onsite at client site: The work location for this role is onsite with our clients and partners to enable delivery and cultivate our client relationships. With all our roles, there is some in-person time for collaboration, learning and building relationships with clients, peers, leaders and communities. As an employer, we will be as flexible as possible to support your specific work/life needs. HERE'S WHAT YOU'LL NEED Minimum 10 years of experience in construction inspection Ability to reach and interpret contract documents including plans, specifications and geotechnical reports The ability to stand, sit and walk throughout the day; bend, crawl, climb (ladders, stairs, hills, etc.) and reach overhead; ability to lift 40 pounds or more and to comply with personal protective equipment requirements and to endure extreme physical temperatures as well as experience loud noises and fumes on project sites BONUS POINTS IF YOU HAVE ESI, BI, Commercial Plumbing Inspector, NASSCO certifications, CIP Coatings Certification, ODOT Prequalified Inspector I/II, Special Inspection Certification (Reinforced Concrete, Soils, etc.) 10+ years of water/wastewater construction inspection experience #J-18808-Ljbffr

Construction Inspector

Mannik Smith Group Columbus, IN

Construction Inspector Department: Construction/CEI Employment Type: Full Time Location: Columbus, OH Description The Mannik & Smith Group, Inc. (MSG) is a people-focused, award-winning, full-service consulting firm that offers a wide array of services including civil and geotechnical engineering, environmental consulting, planning, landscape architecture, agriculture, surveying, and construction support. Our talented staff of more than 450 professionals deliver integrated planning, design, engineering, and construction solutions to our clients from our offices throughout Ohio, Indiana, Michigan, West Virginia, and Alabama. Due to MSG's continued growth in our Construction Services Division, a new opening is available for an Inspector in Columbus! Key Responsibilities Interact with project partners such as clients, contractors, and stakeholders. Read and interpret project plans and specifications. Follow applicable QA/QC procedures. Measure, calculate, and determine all quantities of assigned work and/or installed materials. Report any deficiencies in the contractor's work to the Project Engineer or Project Manager. Prepare Daily Inspector’s Reports using various software such as Word, AASHTOWare Project (AWP), and Appia. Skills, Knowledge and Expertise Minimum two years of experience in Transportation Construction Inspection and Engineering. Strong analytical and problem-solving skills. Computer skills including use of e-mail, Excel, and Word. Certifications and Training ODOT Prequalification in ODOT Inspector/Engineer Categories. NICET Highway Technician I, II, III, or IV. ACI Field Technician Level 1. Ohio Aggregate Level 1. OSHA 10 Hour or 30 Hour (Preferred). Pay & Benefits 401(k) w/ company match. Health insurance w/ HSA option, Vision, Dental, Life. Flexible schedule. Paid time off. Referral program. Tuition reimbursement. Catalytic Coaching: Employees draft a development plan aimed at improving contributions in their current job and increasing the potential for other opportunities. MSG is all about bringing out the best in people at work! It is the policy of our company to follow equal employment opportunity procedures in compliance with federal, state, and local criteria. We will provide all applicants for employment, and all employees, with equal opportunity without regard to race, color, religion, national origin, age, sex, height, weight, marital status, arrest record, disability, pregnancy, sexual orientation, gender identity or expression, genetic information, military or veteran status, and/or any other protected classes covered by any local, state, and federal laws. #J-18808-Ljbffr

Field Inspector

Quiktrak, Inc. Columbus, OH

Are you in search of a flexible work schedule? Are you interested in earning additional income with potential for growth? Do you prefer working outdoors rather than confined to an office or warehouse? This position requires travel from location to location. Quiktrak is looking for 1099 Audit and Inventory Inspectors to perform field audit inspections in your area. Our contracted inspectors travel to various locations to capture photos, gather data, and upload information using their smartphones or computers. While most inspections involve automobiles and equipment, some may also include properties, product inventories, or property condition assessments. When you partner with Quiktrak, you are collaborating with experienced professionals dedicated to delivering exceptional customer experiences since 1991. Over the years, we have expanded our business to become one of the industry's largest players, offering floorplan audits, data collection, inspection services, and business growth opportunities for our contractors. Our most successful Inspectors share common traits such as resourcefulness, discipline, a strong work ethic, meticulousness, and the ability to persevere through challenges. If this description resonates with you, we encourage you to apply today. Skills and Requirements: 1099 Independent Contractor status (be your own boss!) Flexible Schedule (daylight hours, Monday - Friday) Comfortable working outdoors in various weather conditions Access to a recent smartphone or tablet to execute jobs while on site. Availability of a computer with Wi-Fi to accept and schedule jobs. Ownership of a reliable vehicle and a valid driver's license Strong oral and written communication skills Proficiency with current operating systems (e.g., Google Chrome, IOS, Microsoft) Capability to stand and walk continuously for up to seven and a half hours Compensation/Service Fees: All inspectors are independent contractors and receive payment per inspection, with fees varying based on complexity and location. Job Types: Contract, Part-time Pay: Earnings can average around $1,500 per month or more, depending on your location, acceptance of offered contracts, and availability. Benefits: Flexible schedule Choose your own hours. License/Certification: Driver's License (Required) United States Applicants Only #J-18808-Ljbffr

Electrical Inspector

Russ Hadick & Associates, Inc. Columbus, OH

Page | 1 of 2 Job Description for Electrical Project Inspector This position report directly to a Project Manager of Ascension Construction Solutions Ascension Construction Solutions has a job opening for a full-time construction inspector for utility, tunnels, water/wastewater and transportation/highway and vertical construction projects. Successful candidates shall meet the following requirements: Electrician- Journeyman or Master Electrican, Knowledge of NEC. full health benefits (medical dental and vision), cellphone reimbursement, 401k Plan and vehicle allowance when applicable PRIMARY FUNCTIONS • Perform all functions with honesty and integrity. • Perform construction inspection and testing services related to earthwork, utilities, tunnels, materials and general construction for DOT, municipalities, vertical construction and private sector clients. • Perform computations with formulas, plot data and draw simple curves and graphs. • Responsible for inspecting and reporting on specific aspects of construction works in progress for transportation, utility, water/wastewater and vertical construction projects. • Responsible for conducting inspections of electrical installations, including wiring, equipment, and grounding systems. • Verify compliance with the National Electrical Code (NEC), local building codes, and other relevant regulations • Assure that job site tests/ inspections, including quality control, quality assurance, and verifications are performed in accordance with the standard test/ inspection methods, project specifications, and another contract document. • Prioritize and work on multiple projects/tasks simultaneously. • Perform all phases of field assignment. Interpret specifications, working drawings and convey intent to the contractor. • Responsible for all aspects of field inspection, testing, testing coordination, and sampling equipment. • Obtain and record field data, in a legible and organized fashion; as required by the plans, specifications, or project staff. • Generate and compile electronic field reports, maintain accurate records of inspections and reports. • Issue permits and approvals for electrical work that meets standards. • Investigate complaints and electrical incidents. • Work with project staff on design changes. • Communicate with all entities keeping everyone fully informed, including providing technical guidance and recommendations. • Identify and report potential hazards and code violations. • Record daily installed construction quantities to review payment requests in terms of progress and amount completed to date. • Understand the public health and safety requirements and be fully trained in the proper safety procedures. • Stay up to date on changes to electrical codes and standards through ongoing education and training. • May be required to facilitate meetings and or take meeting notes. • May be required to perform night shift work. • Assume additional responsibilities as directed. PHYSICAL REQUIREMENTS • Climb permanent and temporary stairs and ladders • Stand for long periods of time • Use of construction personnel hoist • Navigate active construction sites consisting of uneven ground varying in height and consistency of material • Use of vision, hands and fingers • Speak, hear, stoop/bend crouch • Lift/carry a minimum of 30 pounds • Be able to wear standard PPE, i.e. hard hats, safety vest, work boots, safety glasses/goggles WORK ENVIRONMENT • Mud, gravel, rutted/uneven ground etc. • Exposed to outdoor weather conditions • Exposed to heavy machinery • Loud noise • Tripping hazards • Environmental hazards EDUCATION REQUIREMENTS • High School diploma or GED required QUALIFICATIONS • Must have a valid driver's license • Qualified candidate must have a valid driver's license and retain a clean motor vehicle report (MVR) for final consideration. • Must have 2 or more years of working experience • Experience working on municipal projects is considered a plus • Must be able to apply effective management techniques to maximize project performance. Page | 2 of 2 • Thorough understanding of industry practices, processes, standards, etc. and their impact on project activities is essential. • Excellent organizational, communication and interpersonal (tact, diplomacy, influence, etc.) skills. • Possess a personal vehicle for use during the day for transportation to and from and on or around a job site. • Ability to read and understand plans and direction given in English language. • Ability to write in English. • Basic math and computer skills • Ability to create and or edit Microsoft Word documents • Ability to create and or edit Microsoft Excel documents • Ability to create and or edit Outlook emails with attachments DESIRED CERTIFICATIONS • Ideal candidates are prequalified as an Electrical Inspector, or have the ability to obtain within 6 months. Client will assist in obtaining certifications CAPABILITIES • Ability to build relationships with and influence other functional areas • Strong interpersonal skills • Highly developed verbal and written communication skills • Organization and time management skills • Problem-solving skills with ability to perform root cause analysis • Proficient with Microsoft Office applications • Proficient with Project Management Tools • Exposure to Contractor payment processing requests • Meet travel requirements for job assignments • Ability to read shop drawings and review submittals for project compliance This position is contingent on the successful completion of a background check and drug screening. Client is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability or protected veteran status. #J-18808-Ljbffr

Utility Inspector Quality Control

Star Construction Columbus, OH

Discover a more connected Inspector career at Star ConstructionAt Star Construction, as a Inspector, you will perform walkouts on construction of telecommunications to ensure scope of work performed i

Columbus, OH

Posted 2 days ago

Job Description

Great opportunity for an experience Quality Inspector in the precision metal industry to join an established and growing manufacturer in Columbus! The Quality Inspector will Inspect materials and products utilizing GDT (Geometric tolerances and dimensioning), Metric and English measurements, Prints/Drawing/Specs, hand held and large inspection equipment, programming and operating a CMM and similar.

This is a 2nd shift position working Monday-Thursday from 3:15p-1:45p. Pay rate starts at $20 and can go up with more experience. Apply now! The be successful in this role, the Quality Inspector must have: -3+ yrs experience in Quality Control in Precision Metal Fabrication -Experience with Inspection tools -CMM experience is a plus -Ability to lift up to 50 lbs as needed -High School Diploma or equivalent Trillium has been recruiting and placing professionals for over 30 years. From Fortune 100 companies to small businesses, our philosophy remains the same: to achieve excellence by providing quality employees and an uncompromising level of service. We believe in honesty, integrity, and a simple philosophy of providing value to our customers and our employees. We strive to be unsurpassed in the recruitment and placement of quality and skilled professionals. Trillium is an Equal Opportunity Employer.